Skip to main content
GullySystem
Manufacturing

Business solutions for CNC machining companies

Explore software for work such as “Five-axis CNC machining”. Review each business function below, including when it fits and what to check before implementation.

CNC machining companies

How the business operates.

You run Swiss-type and chucker turning centres, a few VMCs with tombstone fixtures and a centreless grinder, making shafts, trunnions, pinions and hydraulic adaptors to someone else’s drawing. Concentricity, roundness and surface roughness limits are tight. Quantities swing from order to order, and the buyer’s quality engineer reads your first-article approval file and inspection report long before the invoice is looked at.

Drawing revisions held on the order

Hold the revision letter on the part, the sales order and the work order, so a lot cut to an older revision stays identifiable long after it ships. Setters see only the current one.

Operations and machines per part

List the operations for each part in sequence, such as facing, rough turning, counterboring, keyway milling, spline cutting, knurling, broaching, honing and grinding, with the machine for each.

Job cards by operation

Record quantity passed, rejected and sent for rework at every operation, with operator, machine and shift on each card. Queues per lathe and VMC show at a glance.

Inspection readings and lot hold

Save inspection readings against the part, from the first-piece report to the last in-process check, and hold a lot until quality clears it. Rejection and rework are counted by operation, against a reason list such as oversize bore, taper, chatter, burr or thread damage that your inspectors agree on.

Bar and forging stock by grade and size

Count bright bar, hex bar, tube, forgings and castings by grade and diameter, and issue every cut length against a work order number. Shortages for open orders go to purchase.

Outside processing notes

Track material sent for heat treatment, plating, centreless grinding or coating, and reconcile what returned against what went, vendor by vendor. Short returns are flagged on the delivery note.

Tool life and insert usage

Cutting inserts, drills and taps are issued to a machine and counted by part run. The record shows tool cost per component. Toolroom staff reorder worn items before a run starts.

Customer call-off schedule

Repeat buyers send standing orders with monthly dates, quantities and delivery places. The schedule holds each release and what has already been shipped to the buyer. Shortfalls show early.

Gauge and instrument calibration

Micrometres, bore gauges, thread rings and CMM probes carry calibration dates and certificates. Overdue instruments are blocked from use. Inspectors see which gauge was used on a lot.

Rejection and rework register

Rejected shafts and bushes are logged with the defect, the operation and the machine used. Rework instructions are noted against the lot. The quality head reviews repeat causes with the shift supervisors.

The records that hold the operation together.

  • Enquiries and production quotations. Log buyer enquiries with the drawing or sample attached, then cost bar weight, machine minutes and outside plating before a price goes back to the purchasing desk. Every costing revision is kept.
  • Sales orders and delivery commitments. Hold confirmed orders with part number, drawing revision, quantity, rate, schedule and the delivery week promised to the buyer, so a balance after each part delivery is always visible. Late orders stand out.
  • Multi-level bill of materials and routing. Keep each part’s material list and stage sequence. Drawing revisions, scrap allowance, the CNC lathe or press brake each stage runs on and the fixture it needs sit beside it. A sub-assembly carries its own list.
  • Work orders and batch planning. Release a work order for a batch, set its target date, and see the load already queued on each machine and stage. Planners move dates by hand. Overloaded stages stand out.
  • Job cards by production stage. Record quantity passed, rejected and held at sawing, turning, milling, welding, assembly, painting and packing, stage by stage, against the batch quantity on the work order. Each card names the operator and shift.
  • Raw material and consumable stock. Count bright bar, billets, sheets, castings, forgings, resin, fasteners, shrink film and consumables by grade and size, with every issue carrying a work order number. Heat numbers stay with their stock.
  • Purchase orders and supplier records. Raise orders on material suppliers from the shortage list, receive against them with inspection, and keep the supplier ledger and rate history. Rejected lots show by supplier.
  • Quality checks and rejections. Save inspection readings from vernier, bore gauge and torque wrench checks, count rejection, rework and scrap by stage and reason, and hold a batch until it is cleared. First-off approval and final inspection share one record. Each batch traces back to its work order.

Operational bottlenecks to check

The wrong drawing revision reaches the machine

A buyer revises a tolerance by mail, yet the setter still holds last month’s printout beside the control panel and runs the whole lot of pinions to it. The gauge disagrees at the gate.

Setup and first-piece time go uncounted

Quotes assume a cycle time, but changeovers, first-piece approval, a worn collet, a blunt reamer, swarf clearing and the wait for a thread ring gauge use up whole shifts. Those hours go uncounted.

Rejections surface only at month end

Pieces fail on a bore diameter, ovality, an undercut, a chamfer or a thread at in-process checks, final inspection or the buyer’s gate, and the reason is rarely written. Month end shows only a total.

A failed lot cannot be traced to its bar

The buyer asks which bar went into a lot that failed, and the mill certificate for that heat is somewhere in a file box. Tracing it takes hours.

Job work quantities never reconcile

Shafts go out for induction hardening and come back short, or with a few pieces bent past straightening, and the dispatch book cannot say which. The vendor disputes the count.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and costing

    A buyer sends a drawing. The unit works out bar weight, machine minutes and plating charges, and a quotation goes back against that enquiry with the drawing revision noted.

  2. 2. Sales order

    The buyer confirms by purchase order, mail or WhatsApp. Quantity, rate, part number, drawing revision and the promised delivery week go on the order, so planning starts from facts and nothing is retyped.

  3. 3. Work order and material planning

    A work order opens for a batch. The bill of materials lists the bar, sheet or granule that the store must issue by grade and size, with scrap allowance added for the cut length. Shortages go to purchase as a requirement.

  4. 4. Production stages

    The batch moves on its job cards through sawing, turning, welding, assembly or filling, and each stage records quantity passed, rejected and sent for rework. The operator, machine and shift are named on every card, so piece counts reconcile when the batch closes and nobody argues about a shortfall.

  5. 5. Quality and packing

    Final inspection records go/no-go gauge results. Accepted pieces are packed in cartons, labelled and taken into finished goods, while any held lot waits for a decision from the quality head and the planner.

  6. 6. Dispatch, billing and follow-up

    The delivery note and the tax invoice both come from the work order, and payment follow-up is tracked after dispatch along with the next order from the same buyer.

Roles and responsibility boundaries.

For owners

See open orders, work orders by stage, machine load, rejection by reason, bar shortages, dispatches made and money due from buyers, each morning before the first shift starts.

For production planners

Release work orders, read the bill of materials, check material availability and sequence batches on lathes, press brakes and moulding machines, keeping to what the store holds. Dates move after a breakdown.

For shop floor supervisors and operators

See the cards queued for your machine. Mark quantity passed and rejected. Raise a hold on a doubtful piece, and the supervisor sees it before the next batch loads onto the same fixture or press.

For stores and buyers

Issue material against a work order, receive supplier deliveries with inspection, and watch grades that fall below reorder level before the planner notices the shortage. Short bright bar is flagged early.

For accounts and dispatch

Raise delivery notes and tax invoices from closed work orders, record payments, and read buyer outstanding by order, with the gate slip and dispatch date beside each line. No digging through carbon copies.

Reports your managers need.

  • Work orders still open, grouped by stage and promised week
  • Production by stage, machine and operator each shift
  • Material consumed against the bill of materials
  • Rejection and scrap by stage and reason
  • Job work out, returned and short, by job worker
  • Bar, sheet and resin stock against shortages
  • Dispatches and buyer outstanding by order

Connections to scope

  • WhatsApp
  • SMS
  • Email
  • Payment links and gateways
  • Accounting software export (quoted separately)
  • Barcode or label printers
  • Weighing scales
  • Biometric attendance devices

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Your parts, grades and stage names

Part numbers, material grades, sizes and the stage names your floor uses go in, and words like deburr, temper, chamfer or fettle stay exactly as your people say them.

Your bill of materials and revisions

Material lists, scrap allowance and routing per part are entered, and how a drawing revision is numbered follows your present practice in the drawing office. Sub-assembly structures are built from the bottom up.

Issue, rejection and job work rules

Who may issue material, who may pass a rejection and how outside vendors are reconciled are set the way your unit works today. Approvals are added only where you already have them.

Masters and balances migrated

Buyer and supplier lists, item masters, opening bar stock and finished goods arrive from your spreadsheets, and the store checks counts against the racks before go-live.

Hosting across shed, store and office

GullySystem runs the hosting, so the shed, the store and the office all read one set of work orders from a plain browser tab on any phone. When a product changes, our staff add the new stage, jig or part to the routing, and supervisors never have to edit it themselves.

Limitations to settle before implementation

  • A firm that only buys and resells, with no making at all, should look at our wholesale ordering product instead.
  • A single craftsman working to order with no stages, store or job work may find a notebook and a basic invoicing app enough.
  • A plant that runs continuous process control from instruments, with loops tuned on a control panel, needs plant automation rather than a production record system.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Five-axis CNC machining
  • Precision turned components
  • Prototype and low-volume runs
  • Titanium and exotic alloy machining
  • Sheet metal fabrication
  • Export orders and international buyers
  • Auto ancillary contract manufacturing
  • Quality certification and inspection reporting
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements