Skip to main content
GullySystem
Manufacturing

Job Work Management for CNC machining companies

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Outside hardening, plating or passivation interrupts the machining route and must remain visible as work in progress. Configure each dispatch around the part, revision, lot and process requested. The processor's returned pieces, rejected pieces and certificate are separate evidence; an invoice for the process cannot close a shortage of physical components. Retain the processor's certificate with the return it covers rather than as a general supplier attachment. If several machining lots leave together, their identities must survive the consolidated dispatch. The reconciliation should show which quantities returned usable, which await inspection and which remain outside the shop.

Bring the records the workflow depends on.

  • Part and drawing revision sent for processing
  • Dispatch count, weight and machining-lot reference
  • Requested treatment and acceptance-document requirement
  • Processor's confirmed return date and commercial terms

Outputs to check

  • Processor-held lot balance
  • Returned quantity and process-certificate record
  • Short-return and outside-rejection investigation list

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Subcontract coordinator

Releases the authorised process instruction and follows the lot still held by the processor.

Receiving inspector

Checks returned identity, quantities and required process evidence before releasing the next machining stage.

Accounts reviewer

Matches the processing charge to the authorised job and accepted return evidence.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Parts return without certificate

Keep the relevant quality release pending and request the specified treatment evidence.

Return count is short

Retain the missing balance with the processor and record whether loss, scrap or a later return explains it.

Pieces need further treatment

Create a linked reprocessing movement rather than counting the same pieces as a new production output.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Dispatch and return quantities reconcile for each treatment lot.
  • The next operation can identify whether outside-process acceptance remains pending.
  • A processing bill retains its link to the actual dispatched and returned components.
CNC machining companies

How the business operates.

You run Swiss-type and chucker turning centres, a few VMCs with tombstone fixtures and a centreless grinder, making shafts, trunnions, pinions and hydraulic adaptors to someone else’s drawing. Concentricity, roundness and surface roughness limits are tight. Quantities swing from order to order, and the buyer’s quality engineer reads your first-article approval file and inspection report long before the invoice is looked at.

Drawing revisions held on the order

Hold the revision letter on the part, the sales order and the work order, so a lot cut to an older revision stays identifiable long after it ships. Setters see only the current one.

Operations and machines per part

List the operations for each part in sequence, such as facing, rough turning, counterboring, keyway milling, spline cutting, knurling, broaching, honing and grinding, with the machine for each.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and production quotations. Log buyer enquiries with the drawing or sample attached, then cost bar weight, machine minutes and outside plating before a price goes back to the purchasing desk. Every costing revision is kept.
  • Sales orders and delivery commitments. Hold confirmed orders with part number, drawing revision, quantity, rate, schedule and the delivery week promised to the buyer, so a balance after each part delivery is always visible. Late orders stand out.
  • Multi-level bill of materials and routing. Keep each part’s material list and stage sequence. Drawing revisions, scrap allowance, the CNC lathe or press brake each stage runs on and the fixture it needs sit beside it. A sub-assembly carries its own list.
  • Work orders and batch planning. Release a work order for a batch, set its target date, and see the load already queued on each machine and stage. Planners move dates by hand. Overloaded stages stand out.

Operational bottlenecks to check

The wrong drawing revision reaches the machine

A buyer revises a tolerance by mail, yet the setter still holds last month’s printout beside the control panel and runs the whole lot of pinions to it. The gauge disagrees at the gate.

Setup and first-piece time go uncounted

Quotes assume a cycle time, but changeovers, first-piece approval, a worn collet, a blunt reamer, swarf clearing and the wait for a thread ring gauge use up whole shifts. Those hours go uncounted.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and costing

    A buyer sends a drawing. The unit works out bar weight, machine minutes and plating charges, and a quotation goes back against that enquiry with the drawing revision noted.

  2. 2. Sales order

    The buyer confirms by purchase order, mail or WhatsApp. Quantity, rate, part number, drawing revision and the promised delivery week go on the order, so planning starts from facts and nothing is retyped.

  3. 3. Work order and material planning

    A work order opens for a batch. The bill of materials lists the bar, sheet or granule that the store must issue by grade and size, with scrap allowance added for the cut length. Shortages go to purchase as a requirement.

  4. 4. Production stages

    The batch moves on its job cards through sawing, turning, welding, assembly or filling, and each stage records quantity passed, rejected and sent for rework. The operator, machine and shift are named on every card, so piece counts reconcile when the batch closes and nobody argues about a shortfall.

  5. 5. Quality and packing

    Final inspection records go/no-go gauge results. Accepted pieces are packed in cartons, labelled and taken into finished goods, while any held lot waits for a decision from the quality head and the planner.

  6. 6. Dispatch, billing and follow-up

    The delivery note and the tax invoice both come from the work order, and payment follow-up is tracked after dispatch along with the next order from the same buyer.

Industry reports to connect with

  • Work orders still open, grouped by stage and promised week
  • Production by stage, machine and operator each shift
  • Material consumed against the bill of materials
  • Rejection and scrap by stage and reason

Questions before implementation.

When should cnc machining companies consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Part and drawing revision sent for processing; Dispatch count, weight and machining-lot reference; Requested treatment and acceptance-document requirement; Processor's confirmed return date and commercial terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Dispatch and return quantities reconcile for each treatment lot. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements