Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for CNC machining companies

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Machining stock needs more detail than a total weight of steel. Configure bars, tubes and forgings by the grade and dimensions that determine whether they fit a planned blank. Offcuts need usable length and traceability, while inserts and taps need their own issue record so a full material rack does not hide missing tools for the next setup. The planning view should distinguish gross rack quantity from material already committed to released work. A long bar allocated to an existing call-off cannot also satisfy a second job merely because it remains physically in stores. Releasing that commitment requires the authorised cancellation or replanning decision to be recorded.

Bring the records the workflow depends on.

  • Material grade, diameter and usable-length records
  • Heat or supplier identification where required
  • Issues and returns against machining work orders
  • Reorder settings for regular materials and consumable tooling

Outputs to check

  • Usable raw-material balance by grade and size
  • Offcut and held-material register
  • Shortage list tied to planned machining lots

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records cut lengths and reusable returns against the job instead of reducing an undifferentiated material total.

Toolroom custodian

Tracks issued inserts, drills and taps under their own item and machine references.

Buyer

Reviews shortages with the planner before choosing a supplier quantity or substitute grade.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Returned offcut lacks identity

Keep it outside traceable usable stock until the material owner resolves its status.

Material is reserved for another call-off

Show the commitment before promising it to a new job.

Insert stock is low despite available bar

Raise the tooling requirement separately so material availability does not imply setup readiness.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • A planned blank is checked against the correct grade, size and usable length.
  • An offcut return preserves its work-order and material references.
  • Tooling shortages remain visible independently of raw-material balances.
CNC machining companies

How the business operates.

You run Swiss-type and chucker turning centres, a few VMCs with tombstone fixtures and a centreless grinder, making shafts, trunnions, pinions and hydraulic adaptors to someone else’s drawing. Concentricity, roundness and surface roughness limits are tight. Quantities swing from order to order, and the buyer’s quality engineer reads your first-article approval file and inspection report long before the invoice is looked at.

Drawing revisions held on the order

Hold the revision letter on the part, the sales order and the work order, so a lot cut to an older revision stays identifiable long after it ships. Setters see only the current one.

Operations and machines per part

List the operations for each part in sequence, such as facing, rough turning, counterboring, keyway milling, spline cutting, knurling, broaching, honing and grinding, with the machine for each.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and production quotations. Log buyer enquiries with the drawing or sample attached, then cost bar weight, machine minutes and outside plating before a price goes back to the purchasing desk. Every costing revision is kept.
  • Sales orders and delivery commitments. Hold confirmed orders with part number, drawing revision, quantity, rate, schedule and the delivery week promised to the buyer, so a balance after each part delivery is always visible. Late orders stand out.
  • Multi-level bill of materials and routing. Keep each part’s material list and stage sequence. Drawing revisions, scrap allowance, the CNC lathe or press brake each stage runs on and the fixture it needs sit beside it. A sub-assembly carries its own list.
  • Work orders and batch planning. Release a work order for a batch, set its target date, and see the load already queued on each machine and stage. Planners move dates by hand. Overloaded stages stand out.

Operational bottlenecks to check

The wrong drawing revision reaches the machine

A buyer revises a tolerance by mail, yet the setter still holds last month’s printout beside the control panel and runs the whole lot of pinions to it. The gauge disagrees at the gate.

Setup and first-piece time go uncounted

Quotes assume a cycle time, but changeovers, first-piece approval, a worn collet, a blunt reamer, swarf clearing and the wait for a thread ring gauge use up whole shifts. Those hours go uncounted.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and costing

    A buyer sends a drawing. The unit works out bar weight, machine minutes and plating charges, and a quotation goes back against that enquiry with the drawing revision noted.

  2. 2. Sales order

    The buyer confirms by purchase order, mail or WhatsApp. Quantity, rate, part number, drawing revision and the promised delivery week go on the order, so planning starts from facts and nothing is retyped.

  3. 3. Work order and material planning

    A work order opens for a batch. The bill of materials lists the bar, sheet or granule that the store must issue by grade and size, with scrap allowance added for the cut length. Shortages go to purchase as a requirement.

  4. 4. Production stages

    The batch moves on its job cards through sawing, turning, welding, assembly or filling, and each stage records quantity passed, rejected and sent for rework. The operator, machine and shift are named on every card, so piece counts reconcile when the batch closes and nobody argues about a shortfall.

  5. 5. Quality and packing

    Final inspection records go/no-go gauge results. Accepted pieces are packed in cartons, labelled and taken into finished goods, while any held lot waits for a decision from the quality head and the planner.

  6. 6. Dispatch, billing and follow-up

    The delivery note and the tax invoice both come from the work order, and payment follow-up is tracked after dispatch along with the next order from the same buyer.

Industry reports to connect with

  • Work orders still open, grouped by stage and promised week
  • Production by stage, machine and operator each shift
  • Material consumed against the bill of materials
  • Rejection and scrap by stage and reason

Questions before implementation.

When should cnc machining companies consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Material grade, diameter and usable-length records; Heat or supplier identification where required; Issues and returns against machining work orders; Reorder settings for regular materials and consumable tooling. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. A planned blank is checked against the correct grade, size and usable length. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements