Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Commercial refrigeration companies

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Van and store counts cover compressors, contactors, fan motors, filter driers and gas cylinders. Alerts fire at each reorder level. Cylinder weight is checked and noted after each job.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Commercial refrigeration companies

How the business operates.

A customer with a failed cold room has stock at risk within hours. The call is urgent. The unit dates from years back, and the engineer needs its make, its refrigerant type and what was done last time before leaving the yard.

Customer sites and unit register

Keep each site with its units by make, model, serial number, refrigerant type and install date, so history opens in one tap.

Fault calls and dispatch

Log a breakdown with the unit, the symptom and the stock at risk, then send the nearest qualified engineer.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer sites and unit register. Hold each site with its cold rooms, cabinets, evaporators and condensing units, including serial numbers, refrigerant types and install dates.
  • Fault calls and dispatch. Log breakdowns with the unit, symptom and stock at risk, and assign the nearest engineer who holds the right skill and the right parts.
  • Planned maintenance calendar. Generate visits by contract and unit, with checklists for filters, coils, door seals, defrost cycles, drain heaters and controller settings.
  • Maintenance contracts and renewals. Record cover, visit counts and fees by contract, and flag each renewal before it lapses.

Operational bottlenecks to check

Unit history lives in memory

The engineer who installed a cold room knows its quirks, its awkward valves and the pipework behind the wall, and none of it is written anywhere. Once that engineer is away, whoever opens the plant room next starts with guesses and rings a customer who cannot say either.

Refrigerant is not traced to a unit

Gas is bought in cylinders, topped up on site and recovered from old plant. Without a record by unit and cylinder, an audit request becomes a search through job sheets.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Site and unit setup

    A customer site is added with each cold room, cabinet, evaporator and condensing unit, with its serial number, refrigerant type and contract cover.

  2. 2. Call or scheduled visit

    A breakdown is logged by phone, message or monitoring alert. Otherwise a planned visit comes due from the contract calendar, and the unit’s earlier faults are shown beside it.

  3. 3. Dispatch

    The dispatcher assigns an engineer by location and skill, with the unit’s history and the parts likely to be needed, such as a fan motor, a contactor or a defrost heater.

  4. 4. Visit and report

    The engineer records pressure readings, superheat, faults found, parts fitted and gas added. A service report follows for the customer to sign.

  5. 5. Invoice

    Call-out, labour, parts and gas are billed. A planned visit under contract is booked with no charge.

  6. 6. Renewal and follow-up

    Contracts are renewed before they lapse, and repeat faults are reviewed by unit, make and compressor model.

Industry reports to connect with

  • Fault calls broken down by unit, type and engineer
  • Recurring faults, by make and model
  • Planned visits completed against missed
  • Contracts approaching renewal

Questions before implementation.

When should commercial refrigeration companies consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Related functions for commercial refrigeration companies.

    Talk to us

    Discuss stock tracking and alerts for your business.

    Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

    What happens after you share your requirements

    1. We review your brief and the systems you already use.
    2. We clarify the workflow, missing information and the work to consider first.
    3. The proposed scope sets out the deliverables, responsibilities and dependencies.
    4. Review the scope and commercial terms before deciding whether to proceed.

    Start with your requirements

    Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

    Share your requirements