Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Conveyor manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Belt rolls, rollers, bearings and idlers are counted by size and rack in the store. A roller size running low raises a reorder line for the purchaser. Old project spares sit apart.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Conveyor manufacturers

How the business operates.

A conveyor is rarely one machine. It is a run of frames, rollers, belts, drives and guards that must meet on a customer’s floor at the right height. Errors show up only when the last section is bolted. By then it is expensive.

Site survey and layout quotation

Take the survey dimensions, product and duty into the record, then price the run, its drive, guards and controls, using the rates your estimator already uses.

Section drawings and numbering

Split each layout into numbered sections with parts lists, so the workshop and the crew work from one list.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and duty capture. Log each enquiry with product, belt speed, incline and route, and keep the photographs and sketches sent by the buyer beside the duty details so nothing is asked twice.
  • Site survey records. Enter dimensions, column positions, floor openings and elevation marks from the visit, and attach them to the project and quotation so the drawing office redraws nothing from paper. Numbers travel.
  • Layout quotations. Price runs from your tables for belt width, roller diameter, drive and guards, and keep every revision shown to the buyer so the final price can be traced back.
  • Section drawings and numbering. Release numbered section drawings and parts lists under a revision letter, so the workshop and the crew work from the same list. Old sheets are retired.

Operational bottlenecks to check

The site survey is separate from the quote

Dimensions are taken on a pad and typed later. A frame is cut to a length that was misread. It is scrapped.

Sections are not numbered against the layout

Frames leave the workshop without a clear order. On site the crew spends a morning sorting what goes where.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and survey

    The enquiry records product, duty and route. A survey visit is booked and its dimensions are entered as measured.

  2. 2. Layout and quotation

    A layout is drawn and priced, with troughed or flat belt, roller type, geared motor, guards and pull-cord switches, and every revision is kept for the buyer. Nothing is overwritten.

  3. 3. Order and section release

    A confirmed order opens a project, and numbered section drawings and parts lists are released to the workshop under a revision letter. The crew reads the same list.

  4. 4. Fabrication and trial fit

    Frames are cut, welded and painted, then trial fitted in the yard. Remarks are logged before dispatch.

  5. 5. Loading and erection

    Sections are loaded in reverse erection order, and the crew fits them from the head end while noting every change made on site. Nothing is lost.

  6. 6. Handover and spares

    The conveyor is run and signed off, and the as-built layout is saved so that belt, idler and drive orders can be quoted from it years later. History stays.

Industry reports to connect with

  • Projects in build by stage
  • Sections fabricated, fitted and loaded, by project
  • Belt, roller and idler issues against each run
  • Quotations won, lost and open, by conveyor type

Questions before implementation.

When should conveyor manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements