Skip to main content
GullySystem
Real estate and construction

Asset AMC Tracking for Elevator companies

Track the maintenance cover and service dates of assets your business owns or uses.

Assets and Fleet

Does this function belong in your operation?

Use when important equipment has warranties or maintenance agreements to monitor.

An asset enters service or its maintenance cover changes.

Every lift is a record with its make, load, floors and controller. Contract status and service history sit on the same page. The technician checks it on arrival.

Bring the records the workflow depends on.

  • Asset identifiers
  • Warranty and service contracts
  • Service dates and vendor contacts

Outputs to check

  • Asset coverage and renewal register
  • Service visit and fault history
  • Uncovered or overdue asset list

Follow the asset amc tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify the asset

    Confirm its tag, location and responsible custodian.

  2. 2. Record the cover

    Attach warranty or maintenance terms and effective dates.

  3. 3. Plan service

    Create due actions from the agreement and asset requirements.

  4. 4. Record delivery

    Keep vendor visits, findings and outstanding work.

  5. 5. Review renewal

    Check expiring cover and obtain the owner's renewal or replacement decision.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Maintenance in-charge

Books the vendor, records the visit, and sees which machine is due next week.

Admin manager

Watches renewals and stops a contract lapsing unnoticed.

Accounts assistant

Pays the contract bill against services actually delivered.

Owner

Reads what maintenance costs, machine by machine.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Warranty and AMC overlap

Identify the responsible provider before approving chargeable work.

Visit not completed

Keep the obligation overdue and record the vendor's next commitment.

Asset replaced or disposed

Review linked cover and renewal instructions instead of continuing reminders for the old asset.

Can this work independently?

The register can run independently using asset and contract details. Fixed-asset records supply identity, vendor records identify the service provider, and tickets capture faults. Accounts confirms supplier payment; a maintenance entry does not establish that the equipment is safe or ready to operate.

Systems and records it connects with

  • Fixed asset register: Asset identifiers, custody and acquisition records.
  • Vendor management: Approved supplier identities, terms and sensitive-change controls.
  • Ticket management: Numbered requests, ownership and resolution history.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • Share the asset list, even a rough sheet. Add whatever contract files you can find, and a note comes back listing machines with no contract or end date.
  • Load contract and warranty dates, covered assets and the agreed maintenance frequency. Check the resulting calendar with the maintenance owner, including renewals, missed visits and equipment that has no current cover.
  • Fault spotters learn the phone screen. They and the maintenance in-charge leave trained, with a guide in your own words. Complaints and visits are entered as they happen. When a renewal arrives, the machine’s history is printed beside the quotation.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Contract dates match the attached agreement.
  • Service history stays with the asset.
  • Uncovered assets are distinguishable from covered assets.
Elevator companies

How the business operates.

An installed lift is a contract that runs for decades. Monthly maintenance, licence renewal and a night call from a watchman are where a lift company’s service is judged.

Lift register

Record each lift by building, make, load, floors served, controller, installation date, licence number and contract type, so any call traces to a machine.

Preventive maintenance schedule

Plan monthly visits by technician and route, with a checklist closed by the technician’s signature.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Lift and building records. Hold each lift with its machine number, make, model, load, speed, floors served, drive type, controller and the building and wing it stands in. A gearless machine is told apart from a geared one at a glance.
  • Enquiries and site surveys. Record enquiries from builders, societies and facility teams, with survey notes on the shaft, pit, headroom and the machine already installed. Photographs of the hoistway and machine room stay with the enquiry.
  • Quotations and modernisation proposals. Quote for a new lift, a repair or a modernisation, listing the parts and labour offered, from a new controller to rope and sheave replacement. Track the quotation to an order, with revisions kept on file.
  • Installation project stages. Follow an erection job through guide rails, machine, counterweight, car, doors, wiring, controller and trial runs. Each stage carries its supervisor and dates. Delays show against the stage that caused them.

Operational bottlenecks to check

Night calls reach the wrong technician

The office phone rings through to a technician who does not cover that area, and the people in the lift wait. The time of the call is not written down.

Service visits cannot be shown to have happened

The association says nobody came, and the only proof is a paper slip in a technician’s bag. The office cannot answer.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and site survey

    A builder, society or facility manager asks for a lift or for service cover. The survey notes the shaft, pit depth, headroom, floors served and the existing machine where there is one, with the machine room dimensions.

  2. 2. Quotation and order

    A quotation covers the lift or the cover offered, with spares and labour included. When it is accepted, the order and payment stages are recorded against the building. Nothing is retyped.

  3. 3. Installation and commissioning

    Erection runs in stages from guide rails, machine and counterweight to car, doors, controller and trial runs. Commissioning and handover close the job, with the governor and buffer test records filed against the lift.

  4. 4. AMC and routine service

    The lift goes on a contract with its visit frequency. Each routine visit opens with a checklist for the machine room, car, hoistway and landing doors, and closes with the technician’s signature. Lubrication is logged.

  5. 5. Breakdown call

    The desk logs the caller, the lift and the fault reported. A technician is sent, and the fault found and the parts used are entered. The call is closed with the outcome, and a trapped passenger is noted as a rescue.

  6. 6. Billing and renewal

    AMC instalments, repair work and chargeable spares are invoiced with tax. Renewal dates appear in advance, so the office can speak to the committee or the facility team before cover lapses.

Industry reports to connect with

  • Lifts under contract by building and cover type
  • Routine visits done against visits due, by route
  • Breakdown calls by lift, with the fault found
  • Spares issued by lift and by technician

Questions before implementation.

When should elevator companies consider asset amc tracking?

Use when important equipment has warranties or maintenance agreements to monitor. An asset enters service or its maintenance cover changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Asset identifiers; Warranty and service contracts; Service dates and vendor contacts. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track the maintenance cover and service dates of assets your business owns or uses. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The register tracks purchased maintenance cover. Service delivery remains the provider’s responsibility, and equipment readiness requires the appropriate inspection.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Contract dates match the attached agreement. Use this check when reviewing the first working version.

Talk to us

Discuss asset amc tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements