Skip to main content
GullySystem
Manufacturing

Job Work Management for Home textile manufacturers

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Embroidery, quilting or printing sent to an outside unit travels against a job order with piece counts. Returns are checked on receipt, and shortages are noted. Accounts know what still sits at the contractor.

Bring the records the workflow depends on.

  • Vendor and process details
  • Material quantities
  • Return and wastage terms

Outputs to check

  • Subcontract dispatch and return register
  • Processor-held material balance
  • Job-work charge reconciliation

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Writes the delivery note, receives the lots and knows which vendor is holding what this morning.

Production in-charge

Chases the process that is holding a job, and plans around the fortnight a coater takes.

Accounts assistant

Compares processing charges with authorised quantities and records unresolved material or rate differences.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial return

Record received output and leave the remaining material balance with the processor.

Excess wastage

Hold the difference for investigation and authorised disposition.

Material sent to another processor

Record an approved transfer with both locations identifiable instead of closing the original job.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Sent and returned quantities reconcile.
  • Material held by each processor remains visible.
  • Charges link to the relevant job.
Home textile manufacturers

How the business operates.

A home textile order is a programme. A retailer asks for a bed set in four colours, each made of a fitted sheet, a flat sheet and pillowcases, and each with its own label, barcode and carton mark. A towel buyer cares about weight per dozen, pile and border. Detail rules.

Buyer programmes and purchase orders

Hold each programme by design, size and colour, with the set composition, the label rules and the delivery windows that belong to that buyer. A merchandiser reads one page.

Lab dip and sample approvals

Record each dip, strike-off and pre-production sample with its approval date, so bulk work follows the approved shade.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Buyer programmes and purchase orders. Hold each programme by design, size and colour, with the set composition, label rules and delivery windows belonging to that buyer.
  • Lab dip and sample approvals. Record each lab dip, strike-off and pre-production sample with its approval date and keep the approved shade on the order.
  • Yarn and fabric stock. Receive yarn and greige fabric by lot, issue it to an order, and see what is free and what is reserved for a programme.
  • Weaving, knitting and dyeing records. Record loom or knitting output, dye lot, shade check and shrinkage so bulk fabric can be matched to the approved dip.

Operational bottlenecks to check

Set composition is checked at packing

A bed set needs a fitted sheet, a flat sheet and pillowcases in the same colour. A missing pillowcase is found at the packing table, long after the fabric was cut.

Approvals are given by email

A lab dip, strike-off or pre-production sample is approved in a message. Weeks later the dye house cannot show which approval governs the bulk.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Programme and order

    The buyer’s order is entered by design, size and colour. Set composition, labels and delivery windows are recorded.

  2. 2. Approvals

    Lab dips, strike-offs and pre-production samples are sent and approved. The dates and photographs are filed on the order.

  3. 3. Fabric

    Yarn is issued, fabric is woven or knitted, dyed or printed, and inspected on the roll machine before cutting.

  4. 4. Cutting and sewing

    Lays follow the set composition. Sewing and towel lines report pieces, rework and rejects by section.

  5. 5. Set check and labelling

    Complete sets are counted, short items are chased, and retailer labels and carton marks are printed from the order.

  6. 6. Inspection and shipment

    The buyer’s inspector draws a sample. On acceptance the cartons are listed and loaded with the packing list and invoice.

Industry reports to connect with

  • Pieces cut, sewn and packed by programme and colour
  • Sets complete and sets short by item
  • Dye lots and approvals by order
  • Towel weight checks by lot

Questions before implementation.

When should home textile manufacturers consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Vendor and process details; Material quantities; Return and wastage terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Sent and returned quantities reconcile. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements