Skip to main content
GullySystem
Real estate and construction

AMC and Service Contracts for HVAC contractors

Track service-contract coverage, obligations and renewal dates.

Field Service

Does this function belong in your operation?

Use when your business provides recurring maintenance or contracted service work.

A maintenance or recurring service contract starts or changes.

Each AMC states the units covered, the visits per year and whether gas and spares are included. Full-cover and labour-only contracts are priced and tracked apart. Expiry shows before the summer rush.

Bring the records the workflow depends on.

  • Signed contract scope
  • Covered assets or locations
  • Visit and billing schedule

Outputs to check

  • Service-contract coverage register
  • Due and completed obligation list
  • Renewal and contract-billing inputs

Follow the amc and service contracts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Register the agreement

    Record covered assets, exclusions, dates and billing terms.

  2. 2. Create obligations

    Schedule the visits or deliverables stated in the contract.

  3. 3. Assign delivery

    Pass due work to scheduling or service-job records.

  4. 4. Review completion

    Reconcile evidence, missed visits and chargeable exceptions.

  5. 5. Manage renewal

    Record the authorised renewal or closure decision and its new terms.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Service coordinator

Plans the month from contracts due, and follows up visits that slipped.

Accounts assistant

Raises contract bills and sees which customers have an unpaid AMC.

Owner

Sees renewals due, contracts lost, and the value expected to lapse in the next quarter.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Visit missed

Keep the obligation outstanding and record a rescheduling decision.

Requested work outside cover

Seek separate approval or quotation instead of marking it included.

Contract renewed with new terms

Create the effective-dated version and preserve work done under the earlier agreement.

Can this work independently?

Contracts can be tracked independently with entered assets, dates and obligations. Technician scheduling and job cards record delivery; invoicing and receipts track the financial side. An active contract record does not establish payment, completion of visits or cover for excluded work.

Systems and records it connects with

  • Technician scheduling: Assigned field jobs and technician availability.
  • Job cards: Service findings, approved work, parts and completion records.
  • Service reports: Approved work evidence and unresolved service findings.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • Send a handful of signed contracts and the sheet where visits are ticked. A note follows. It lists the terms to capture and the visit patterns spotted.
  • Confirm the services, frequencies and billing styles you really sell. Try it on a trial screen. Enter a contract and watch its visit schedule form. Hand over the current contract list, untidy as it is. Planners review the load. Failed contracts are listed, each with its cause.
  • Coordinator, accounts assistant and technicians each name someone for a session. Real contracts are used. The screens feel familiar. Live contracts are keyed in from now on. The old sheet turns read only. Questions from the first renewal cycle get written replies.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Visits link to the correct contract.
  • Expired coverage is distinguishable.
  • Billing follows the agreed contract milestones.
HVAC contractors

How the business operates.

The installation is one payment. The AMC is years of them, plus gas top-ups and a compressor that fails in its seventh summer. That second half is where records fall apart.

Installed unit register

List each indoor and outdoor unit by site, brand, model, serial, tonnage and warranty end date, whether it is a split, cassette, ducted, VRF or chiller.

AMC schedule

Plan preventive visits per contract, with the scope marked full-cover or labour only, and a checklist for filters, coils, gas pressure and current readings.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer sites and units. Keep each customer’s sites and the units at them. Every unit carries its model, capacity, serial number, installation date and service history, and outdoor and indoor units are paired, so a visit never starts from a guess.
  • Enquiries and quotations. Log installation and service enquiries. Prepare quotations for units, piping, drain lines, electrical points and labour, and keep every revision. The accepted version becomes the job without retyping a single line.
  • Installation jobs. Plan installation jobs by team and date, record units fitted and materials used, such as copper pipe, flare nuts, insulation and brackets. Close each job with a handover.
  • Breakdown call desk. Log complaints from phone, WhatsApp and the website. Allocate each to a technician and follow it to closure, and repeat faults on the same unit are flagged, so a third visit gets a senior technician’s eye.

Operational bottlenecks to check

The last gas top-up is unknown

A customer reports poor cooling, and nobody can say when gas was last added, so it is charged again. The customer pays twice.

Preventive visits slip in summer

Breakdown calls take every technician, and quarterly visits slip a month without notice. The customer notices first.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    An enquiry for a new installation or a service contract is logged against the customer. A quotation lists the units, piping, stands, drain lines, electrical points and labour, with tonnage and brand named for each room.

  2. 2. Installation

    An accepted quotation becomes an installation job with a team and a date. Units installed are recorded against the site with serial numbers, and brazing checks, vacuum and leak test readings go on the handover sheet for the customer.

  3. 3. Contract and breakdown calls

    Contract visits are scheduled for each unit. A breakdown call is logged, allocated to a technician and tracked to closure, so no complaint sits unassigned overnight, and the coordinator’s calendar shows both kinds of visit side by side.

  4. 4. Visit and job sheet

    The technician records the fault, the readings, the work done, refrigerant gas added and parts fitted. The customer signs the job sheet on the phone before the technician leaves the site.

  5. 5. Billing

    A tax invoice is raised for chargeable work. Otherwise the visit is marked as covered by a contract or a warranty, and the parts used are still charged to the right account for the contract review.

  6. 6. Renewal and follow-up

    Contracts nearing their end and units due for service are listed, so customers can be contacted before the summer rush. Renewals are quoted from the same unit list, with the repairs of the year noted beside each unit.

Industry reports to connect with

  • Visits completed by technician and by type, with the breakdown calls closed on first visit
  • Contract visits due and visits missed, by unit and by site
  • Contracts ending soon and renewals done
  • Spare parts and refrigerant gas used by job, technician and vehicle

Questions before implementation.

When should hvac contractors consider amc and service contracts?

Use when your business provides recurring maintenance or contracted service work. A maintenance or recurring service contract starts or changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Signed contract scope; Covered assets or locations; Visit and billing schedule. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track service-contract coverage, obligations and renewal dates. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Contract terms determine coverage; the system does not create service commitments beyond the signed agreement.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Visits link to the correct contract. Use this check when reviewing the first working version.

Talk to us

Discuss amc and service contracts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements