Skip to main content
GullySystem
Real estate and construction

Stock Tracking and Alerts for HVAC contractors

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Gas cylinders, capacitors, filters, copper tube and thermostats each carry a reorder level. Van stock is counted apart from the store. An alert fires when R32 runs low before a hot spell.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
HVAC contractors

How the business operates.

The installation is one payment. The AMC is years of them, plus gas top-ups and a compressor that fails in its seventh summer. That second half is where records fall apart.

Installed unit register

List each indoor and outdoor unit by site, brand, model, serial, tonnage and warranty end date, whether it is a split, cassette, ducted, VRF or chiller.

AMC schedule

Plan preventive visits per contract, with the scope marked full-cover or labour only, and a checklist for filters, coils, gas pressure and current readings.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer sites and units. Keep each customer’s sites and the units at them. Every unit carries its model, capacity, serial number, installation date and service history, and outdoor and indoor units are paired, so a visit never starts from a guess.
  • Enquiries and quotations. Log installation and service enquiries. Prepare quotations for units, piping, drain lines, electrical points and labour, and keep every revision. The accepted version becomes the job without retyping a single line.
  • Installation jobs. Plan installation jobs by team and date, record units fitted and materials used, such as copper pipe, flare nuts, insulation and brackets. Close each job with a handover.
  • Breakdown call desk. Log complaints from phone, WhatsApp and the website. Allocate each to a technician and follow it to closure, and repeat faults on the same unit are flagged, so a third visit gets a senior technician’s eye.

Operational bottlenecks to check

The last gas top-up is unknown

A customer reports poor cooling, and nobody can say when gas was last added, so it is charged again. The customer pays twice.

Preventive visits slip in summer

Breakdown calls take every technician, and quarterly visits slip a month without notice. The customer notices first.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    An enquiry for a new installation or a service contract is logged against the customer. A quotation lists the units, piping, stands, drain lines, electrical points and labour, with tonnage and brand named for each room.

  2. 2. Installation

    An accepted quotation becomes an installation job with a team and a date. Units installed are recorded against the site with serial numbers, and brazing checks, vacuum and leak test readings go on the handover sheet for the customer.

  3. 3. Contract and breakdown calls

    Contract visits are scheduled for each unit. A breakdown call is logged, allocated to a technician and tracked to closure, so no complaint sits unassigned overnight, and the coordinator’s calendar shows both kinds of visit side by side.

  4. 4. Visit and job sheet

    The technician records the fault, the readings, the work done, refrigerant gas added and parts fitted. The customer signs the job sheet on the phone before the technician leaves the site.

  5. 5. Billing

    A tax invoice is raised for chargeable work. Otherwise the visit is marked as covered by a contract or a warranty, and the parts used are still charged to the right account for the contract review.

  6. 6. Renewal and follow-up

    Contracts nearing their end and units due for service are listed, so customers can be contacted before the summer rush. Renewals are quoted from the same unit list, with the repairs of the year noted beside each unit.

Industry reports to connect with

  • Visits completed by technician and by type, with the breakdown calls closed on first visit
  • Contract visits due and visits missed, by unit and by site
  • Contracts ending soon and renewals done
  • Spare parts and refrigerant gas used by job, technician and vehicle

Questions before implementation.

When should hvac contractors consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements