Skip to main content
GullySystem
Manufacturing

AMC and Service Contracts for Material handling equipment manufacturers

Track service-contract coverage, obligations and renewal dates.

Field Service

Does this function belong in your operation?

Use when your business provides recurring maintenance or contracted service work.

A maintenance or recurring service contract starts or changes.

Inspection and maintenance contracts list the units covered, the visits owed and the renewal date. Visits are laid out against the examination dates for lifting gear. Expiring contracts reach the sales engineer first.

Bring the records the workflow depends on.

  • Signed contract scope
  • Covered assets or locations
  • Visit and billing schedule

Outputs to check

  • Service-contract coverage register
  • Due and completed obligation list
  • Renewal and contract-billing inputs

Follow the amc and service contracts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Register the agreement

    Record covered assets, exclusions, dates and billing terms.

  2. 2. Create obligations

    Schedule the visits or deliverables stated in the contract.

  3. 3. Assign delivery

    Pass due work to scheduling or service-job records.

  4. 4. Review completion

    Reconcile evidence, missed visits and chargeable exceptions.

  5. 5. Manage renewal

    Record the authorised renewal or closure decision and its new terms.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Service coordinator

Plans the month from contracts due, and follows up visits that slipped.

Accounts assistant

Raises contract bills and sees which customers have an unpaid AMC.

Owner

Sees renewals due, contracts lost, and the value expected to lapse in the next quarter.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Visit missed

Keep the obligation outstanding and record a rescheduling decision.

Requested work outside cover

Seek separate approval or quotation instead of marking it included.

Contract renewed with new terms

Create the effective-dated version and preserve work done under the earlier agreement.

Can this work independently?

Contracts can be tracked independently with entered assets, dates and obligations. Technician scheduling and job cards record delivery; invoicing and receipts track the financial side. An active contract record does not establish payment, completion of visits or cover for excluded work.

Systems and records it connects with

  • Technician scheduling: Assigned field jobs and technician availability.
  • Job cards: Service findings, approved work, parts and completion records.
  • Service reports: Approved work evidence and unresolved service findings.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • Send a handful of signed contracts and the sheet where visits are ticked. A note follows. It lists the terms to capture and the visit patterns spotted.
  • Confirm the services, frequencies and billing styles you really sell. Try it on a trial screen. Enter a contract and watch its visit schedule form. Hand over the current contract list, untidy as it is. Planners review the load. Failed contracts are listed, each with its cause.
  • Coordinator, accounts assistant and technicians each name someone for a session. Real contracts are used. The screens feel familiar. Live contracts are keyed in from now on. The old sheet turns read only. Questions from the first renewal cycle get written replies.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Visits link to the correct contract.
  • Expired coverage is distinguishable.
  • Billing follows the agreed contract milestones.
Material handling equipment manufacturers

How the business operates.

A lifting machine has one job. It must carry a stated weight without failing, and everything in the workshop, from the profile-cut plate to the latched hook, exists to support that promise.

Capacity-based quotations

Quote by rated load, lift height, fork length and guarding option from your own model list, then keep every revision for the buyer. The final figure is never lost.

Structural steel and component records

Receive plate, tube, load chain, wire rope and hook blocks with certificate numbers, then link each to the unit it was fitted to. A buyer can ask which heat of steel carries the load.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and duty capture. Log each enquiry with capacity, lift height, floor type, aisle width and shift pattern, and keep the bay photographs and layout sketches the buyer sent.
  • Quotations by rated load. Price standard models and specials from your own tables for mast height, fork length, battery pack and guarding, and keep every revision on file. Buyers can compare rounds.
  • Drawings for specials. Hold the drawing and parts list of a non-standard unit under a revision letter, so the workshop builds the version that was quoted. Nothing drifts at the bench.
  • Steel plate and tube store. Receive plate, box tube and channel with mill certificate numbers, then issue them against the unit being cut, and return remnants to the rack with their length.

Operational bottlenecks to check

Capacity is quoted but never confirmed at build

The quotation says one tonne on a two-stage mast, but the unit leaving the bay carries a lighter fork arm because stock ran out. The buyer is never told.

Proof tests live in notebooks

Test mass, hold period and result sit on a sheet kept by the tester; a buyer’s auditor asks for it a year later and nobody finds it. The test is gone.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and duty

    The enquiry records capacity, lift height, floor type, aisle width and shift pattern, and a sales engineer is named against it. Nothing is left to the first phone call.

  2. 2. Quotation

    A model is picked from the list, or a special is sketched, and options such as chain guards, battery pack and delivery are priced. Every revision stays on file for the next round.

  3. 3. Order and release

    A confirmed order opens a unit record, and the drawing, parts list and component picks, such as load chain, hook block and lift cylinder, go to the workshop together.

  4. 4. Fabrication and assembly

    Plate and box tube are cut and welded, the drive and chain are fitted, and a lead signs off each stage. Painting comes last, after the weld inspection.

  5. 5. Test and nameplate

    The unit is loaded to its stated proof weight and held, the result and tester are saved, and the nameplate is printed from that same record.

  6. 6. Dispatch, installation and service

    Delivery, commissioning and the first inspection date are written against the serial, and yearly visits are then scheduled from the customer register.

Industry reports to connect with

  • Units in build, split by stage and model
  • Steel, chain and hook issues by serial
  • Load tests done, passed and awaiting
  • Quotations won, lost and still open, by duty class

Questions before implementation.

When should material handling equipment manufacturers consider amc and service contracts?

Use when your business provides recurring maintenance or contracted service work. A maintenance or recurring service contract starts or changes.

What should we bring to the requirements discussion?

Bring anonymised examples of Signed contract scope; Covered assets or locations; Visit and billing schedule. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track service-contract coverage, obligations and renewal dates. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Contract terms determine coverage; the system does not create service commitments beyond the signed agreement.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Visits link to the correct contract. Use this check when reviewing the first working version.

Related functions for material handling equipment manufacturers.

Talk to us

Discuss amc and service contracts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements