Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Material handling equipment manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Load chain by the metre, wire rope reels, hydraulic cylinders and castor wheels are counted by location. A low cylinder count shows before orders are released. Plate offcuts are listed too.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Material handling equipment manufacturers

How the business operates.

A lifting machine has one job. It must carry a stated weight without failing, and everything in the workshop, from the profile-cut plate to the latched hook, exists to support that promise.

Capacity-based quotations

Quote by rated load, lift height, fork length and guarding option from your own model list, then keep every revision for the buyer. The final figure is never lost.

Structural steel and component records

Receive plate, tube, load chain, wire rope and hook blocks with certificate numbers, then link each to the unit it was fitted to. A buyer can ask which heat of steel carries the load.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and duty capture. Log each enquiry with capacity, lift height, floor type, aisle width and shift pattern, and keep the bay photographs and layout sketches the buyer sent.
  • Quotations by rated load. Price standard models and specials from your own tables for mast height, fork length, battery pack and guarding, and keep every revision on file. Buyers can compare rounds.
  • Drawings for specials. Hold the drawing and parts list of a non-standard unit under a revision letter, so the workshop builds the version that was quoted. Nothing drifts at the bench.
  • Steel plate and tube store. Receive plate, box tube and channel with mill certificate numbers, then issue them against the unit being cut, and return remnants to the rack with their length.

Operational bottlenecks to check

Capacity is quoted but never confirmed at build

The quotation says one tonne on a two-stage mast, but the unit leaving the bay carries a lighter fork arm because stock ran out. The buyer is never told.

Proof tests live in notebooks

Test mass, hold period and result sit on a sheet kept by the tester; a buyer’s auditor asks for it a year later and nobody finds it. The test is gone.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and duty

    The enquiry records capacity, lift height, floor type, aisle width and shift pattern, and a sales engineer is named against it. Nothing is left to the first phone call.

  2. 2. Quotation

    A model is picked from the list, or a special is sketched, and options such as chain guards, battery pack and delivery are priced. Every revision stays on file for the next round.

  3. 3. Order and release

    A confirmed order opens a unit record, and the drawing, parts list and component picks, such as load chain, hook block and lift cylinder, go to the workshop together.

  4. 4. Fabrication and assembly

    Plate and box tube are cut and welded, the drive and chain are fitted, and a lead signs off each stage. Painting comes last, after the weld inspection.

  5. 5. Test and nameplate

    The unit is loaded to its stated proof weight and held, the result and tester are saved, and the nameplate is printed from that same record.

  6. 6. Dispatch, installation and service

    Delivery, commissioning and the first inspection date are written against the serial, and yearly visits are then scheduled from the customer register.

Industry reports to connect with

  • Units in build, split by stage and model
  • Steel, chain and hook issues by serial
  • Load tests done, passed and awaiting
  • Quotations won, lost and still open, by duty class

Questions before implementation.

When should material handling equipment manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements