Job Cards for Modular kitchen companies
Keep the inspection, work, parts and status of a service job together.
Does this function belong in your operation?
Use when service or repair work needs a record beyond an appointment.
A repair or field-service request is accepted.
Each kitchen installation becomes a card with the carpenter, the plumber and the electrician assigned. Tasks like base unit fixing and countertop fitting are ticked off. Delays reach the project coordinator.
Bring the records the workflow depends on.
- Customer and asset details
- Reported issue
- Work and parts approval rules
Outputs to check
- Service job and inspection record
- Approved parts and labour statement
- Completion and billing handoff
Follow the job cards workflow.
Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.
Who uses the module, and who approves?
Keep responsibilities distinct even when one person holds more than one role.
Decide how exceptions are handled.
These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.
Can this work independently?
Job cards can run with entered customer and asset records. Scheduling assigns staff, stock controls parts, and invoicing creates the bill from approved work. Closing a technical job should be distinguishable from financial settlement or customer acceptance where those occur later.
Systems and records it connects with
- Estimates and quotations: Approved estimate lines, revisions and acceptance references.
- Invoice management: Issued invoice references, line amounts and outstanding balances.
- Spare-parts stock: Item-location quantities and authorised stock movements.
- Technician scheduling: Assigned field jobs and technician availability.
Configure, test and introduce the workflow.
- We trace a vehicle from gate to delivery. You show us today’s slips, and we return the card layout we propose.
- Stages and who may change them are agreed. A chart on a page is yours to approve. The parts list and labour rates are loaded. Storekeepers test issuing against dummy cards.
- Cards run alongside paper for a stretch. Differences are discussed with advisors and technicians. Cards become the only record. The workshop team gets a short practice on phones.
Check the result before rollout.
Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.
- Parts usage links to the job.
- Unapproved additional work remains flagged.
- Completion retains the service record.
How the business operates.
A kitchen is built to millimetres and changed on a phone call on a Sunday. A new extractor model, or a sink moved by two hundred millimetres, can undo a cutting list that is already on the panel saw.
The records that hold the operation together.
- Showroom enquiries and site visits. Record each client, the flat or site, the kitchen shape discussed, who referred them, and the measurement visit booked.
- Site measurement sheets. Hold wall lengths, ceiling height, beam drops, window sills, door positions and existing gas, water and drain points for every kitchen measured.
- Design drawings and revisions. Keep each layout version, the renders shown to the client and the change asked for, so the approved revision is clear. Nothing is overwritten.
- Carcass board and shutter finish selection. Set the board grade and the shutter finish for each unit, from your own list of plywood, MDF, HDF, laminate, acrylic and paint options.
Operational bottlenecks to check
The factory makes the old revision
The tall unit changes, the factory has the earlier file, and a full carcass is wasted. The remake takes weeks.
Site points move during civil work
The gas point and the sink outlet are not where the drawing says, and the modules do not fit. Changes follow on site.
How work flows across this business
This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.
1. Enquiry
A client walks into the showroom, calls, or comes through an architect. The flat, the kitchen shape and the budget range discussed are noted against the enquiry.
2. Site measurement
A measurer visits the flat and records wall lengths, ceiling height, beam drops, window and door positions, and any wall that is out of plumb at the corner. Existing electrical, water, gas and drain points are marked on the same sheet.
3. Design and selection
The layout is drawn and the kitchen is broken into base, wall, tall and loft units. Carcass board, shutter finish, handles and hardware are chosen unit by unit with the client.
4. Quotation and approval
Each unit is priced with its finish and hardware, and appliances, hob and countertop are added. The client signs off a drawing revision and pays the advance.
5. Production and purchase
The approved drawing becomes a cutting list and assembly job for the factory or the panel supplier, with offcuts from the beam saw reserved for fillers and shelves. Boards, hardware, countertop and appliances are ordered against the project.
6. Installation and handover
Carcasses are levelled, shutters aligned and the countertop, hood and sink fitted. Snags are listed and cleared. The balance is billed and hardware warranty is recorded.
Industry reports to connect with
- Enquiries by source and how far each reached
- Kitchens by stage, from measurement to handover
- Design revisions and approval dates per project
- Quotations given, approved and closed without an order
Questions before implementation.
When should modular kitchen companies consider job cards?
Use when service or repair work needs a record beyond an appointment. A repair or field-service request is accepted.
What should we bring to the requirements discussion?
Bring anonymised examples of Customer and asset details; Reported issue; Work and parts approval rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.
Does this replace our existing business software?
The starting point is your current system and the gap you need to close. Keep the inspection, work, parts and status of a service job together. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.
What is outside this module?
A job card records work and does not itself certify repair quality or equipment safety.
How are scope, price and rollout decided?
The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Parts usage links to the job. Use this check when reviewing the first working version.
Related functions for modular kitchen companies.
Discuss job cards for your business.
Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements