Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for PCB manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Laminate sheets, dry film, solder mask ink and gold salt are counted in their own units. Ink and film show their expiry dates. Drill bits are listed by diameter.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
PCB manufacturers

How the business operates.

A bare board order starts as a set of files and ends as a stack of boards in a vacuum bag. In between, a panel passes a dozen wet and dry steps, and every step has its own scrap. One late revision can sink a lot.

Order and file revision register

Hold the buyer’s Gerber set, fabrication note and revision, so CAM and the floor never image from an outdated pack.

Engineering query tracker

Log each CAM question, send it to the buyer, record the answer and release the lot only when all queries are closed.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and quotations. Price boards from layer count, size, panel utilisation, finish and quantity bands, with every revision of a quotation kept.
  • File revision register. Attach the Gerber set, drill file and fabrication note to the order with a revision letter, and show the floor only the released set.
  • Engineering queries. Raise a CAM question, send it to the buyer, record the answer and block the lot until the query is closed.
  • Stack-up and panel plans. Hold the laminate, prepreg and copper weight of each build, with boards per panel and panel size.

Operational bottlenecks to check

The wrong Gerber revision gets imaged

The buyer resends files after CAM has started, and the film is made from the old set while the new revision waits in an inbox that the floor never opens. The error shows only on the electrical test.

Engineering queries wait in email

A clearance question to the buyer sits unanswered while the lot waits for tooling. The planner cannot tell which orders are blocked on a reply.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    A buyer sends files and a fabrication note. The estimator checks layer count, size, finish and quantity, and prices from panel utilisation.

  2. 2. CAM review

    CAM checks clearances and drill data, raises engineering queries and lays out the panel. The order is released only after the buyer’s answers.

  3. 3. Lot creation

    A lot opens with the file revision, stack-up and a traveller by process step. Laminate and prepreg are issued against it.

  4. 4. Process steps

    Imaging, etch, lamination, drilling, plating, mask, legend, finish and routing are each logged with quantity in, quantity out and scrap reason.

  5. 5. Test and inspection

    Open and short test results are saved by board. Final inspection checks dimensions, finish and visual defects.

  6. 6. Packing and shipment

    Boards are counted, bagged and labelled with the date code. The certificate of conformance, test report and packing list are issued.

Industry reports to connect with

  • Yield by process step, by week and by board type
  • Orders waiting on engineering queries
  • Scrap reasons for drilling, plating and etching
  • Lots affected by a given bath change or press load

Questions before implementation.

When should pcb manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements