Skip to main content
GullySystem
Manufacturing

Business solutions for PCB manufacturers

Explore software for work such as “Multilayer boards for industrial controllers”. Review each business function below, including when it fits and what to check before implementation.

PCB manufacturers

How the business operates.

A bare board order starts as a set of files and ends as a stack of boards in a vacuum bag. In between, a panel passes a dozen wet and dry steps, and every step has its own scrap. One late revision can sink a lot.

Order and file revision register

Hold the buyer’s Gerber set, fabrication note and revision, so CAM and the floor never image from an outdated pack.

Engineering query tracker

Log each CAM question, send it to the buyer, record the answer and release the lot only when all queries are closed.

Stack-up and panel planning

Record layer count, laminate type, copper weight and panel size, and plan the board quantity for each panel.

Lot travellers by process step

Take a lot past imaging, etch, lamination, drilling, plating, mask, finish and routing, noting panels in and panels out at each stop.

Yield and scrap by step

Record scrap with a reason at each step and see the yield of a lot while it is still running.

Electrical test results

Store open and short test outcomes per board and per lot, with failed board numbers and the reasons found.

Certificates and shipment

Print the certificate of conformance, test report and packing list from the lot, with date code and quantity.

Plating and etch bath log

Record each bath’s analysis, chemical additions and dump date, with the panel lots that passed through before and after. A later defect points to a bath. Baths are dated.

Drill bit and tool life

Count hits on each drill bit and router bit by spindle, and log every change. Worn bits are retired on the count. Hole quality is read against the bit.

Laminate and prepreg stock

Hold laminate by thickness and copper weight, and prepreg by resin content, with supplier lot and receipt date. Old prepreg is listed for the lamination planner. Shelf life is watched.

The records that hold the operation together.

  • Enquiries and quotations. Price boards from layer count, size, panel utilisation, finish and quantity bands, with every revision of a quotation kept.
  • File revision register. Attach the Gerber set, drill file and fabrication note to the order with a revision letter, and show the floor only the released set.
  • Engineering queries. Raise a CAM question, send it to the buyer, record the answer and block the lot until the query is closed.
  • Stack-up and panel plans. Hold the laminate, prepreg and copper weight of each build, with boards per panel and panel size.
  • Lots and process travellers. Follow a lot from inner layer to routing, logging panels in, panels out and the operator who signed off each step.
  • Step scrap and running yield. Log scrap with a reason at the step where it happened, and read the running yield of a lot.
  • Plating bath and press logs. Link bath changes and lamination press loads to the lots that went through them, so a defect can be traced to its group.
  • Electrical test results. Store open and short outcomes per board, failed board numbers and rework decisions against the lot.

Operational bottlenecks to check

The wrong Gerber revision gets imaged

The buyer resends files after CAM has started, and the film is made from the old set while the new revision waits in an inbox that the floor never opens. The error shows only on the electrical test.

Engineering queries wait in email

A clearance question to the buyer sits unanswered while the lot waits for tooling. The planner cannot tell which orders are blocked on a reply.

Yield is known only at the end

Scrap from drilling, plating and etching is counted in different departments, each with its own count sheet and its own reasons. The loss on a lot is clear only after the whole run closes.

Chemical bath changes are not tied to lots

A plating bath is adjusted or dumped, and the panels that passed through it before and after look the same on paper. A later defect has no cause to point at.

Customer certificates are typed by hand

Every shipment needs a conformance certificate and a test report quoting lot, quantity and date code. Clerks copy these from three records.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and quotation

    A buyer sends files and a fabrication note. The estimator checks layer count, size, finish and quantity, and prices from panel utilisation.

  2. 2. CAM review

    CAM checks clearances and drill data, raises engineering queries and lays out the panel. The order is released only after the buyer’s answers.

  3. 3. Lot creation

    A lot opens with the file revision, stack-up and a traveller by process step. Laminate and prepreg are issued against it.

  4. 4. Process steps

    Imaging, etch, lamination, drilling, plating, mask, legend, finish and routing are each logged with quantity in, quantity out and scrap reason.

  5. 5. Test and inspection

    Open and short test results are saved by board. Final inspection checks dimensions, finish and visual defects.

  6. 6. Packing and shipment

    Boards are counted, bagged and labelled with the date code. The certificate of conformance, test report and packing list are issued.

Roles and responsibility boundaries.

For CAM engineers

Check files, raise queries, release the panel layout and see which orders wait on an answer.

For the planner

See every lot by process step, the bottleneck step today and the promised ship dates at risk.

For process leads

Log quantities in and out, scrap reasons and bath changes for imaging, plating or lamination.

For quality

Review test results, hold lots, and issue certificates with the right date code.

For the owner

Read yield by step, orders at risk and margin on a quoted job against the lot actually run.

Reports your managers need.

  • Yield by process step, by week and by board type
  • Orders waiting on engineering queries
  • Scrap reasons for drilling, plating and etching
  • Lots affected by a given bath change or press load
  • Electrical test failures by lot and customer
  • Laminate and prepreg stock against open lots
  • Quoted against actual panel utilisation

Connections to scope

  • Email
  • Test equipment result files
  • Accounting export
  • SMS
  • WhatsApp

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Process route

Your steps, including any outside process such as gold plating, are set as templates for each board type.

Panel sizes and finishes

The panel sizes you cut, laminate grades you stock and finishes you offer, such as HASL, ENIG or OSP, are entered first.

Test programme import

The way your electrical tester exports results is reviewed so board-level outcomes can come in as a file.

Open orders migrated

Running jobs, buyers’ part numbers and earlier lots come in from the records you keep, then planning samples a few.

Limitations to settle before implementation

  • Firms that buy bare boards and populate them will find PCB Assembly Company Management Software closer.
  • A hobby prototyping bench that sends boards to an outside fabricator can run without it.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • Multilayer boards for industrial controllers
  • Metal-core boards for LED and power supplies
  • Prototype and quick-turn orders from startups
  • Flex and rigid-flex boards for compact devices
  • HDI boards for telecom and networking equipment
  • Automotive and EV board qualification
  • Panelised volume lots for EMS companies
  • Board sets for defence and aerospace programmes
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements