Skip to main content
GullySystem
Other industries

Batch and Serial Tracking for Poultry farms

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

A flock is followed from the chick placement to the final lift, with the shed, feed lots and vaccines tied to it. A sale slip traces back to the placement date. Mixed flocks stay apart.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Poultry farms

How the business operates.

A shed is a small business with a clock on it. Chicks are placed on a known day, and every bird, bag of feed and dose of medicine after that belongs to one flock number. Mistakes show up weeks later as a poor conversion figure nobody can explain. A daily record per flock shows where it went wrong.

Flock and shed register

Record each placement by shed, hatchery, breeder flock, chick count and grade, then follow the flock to its last bird with one flock number on every entry. Nothing floats free.

Daily mortality and culls

Supervisors enter dead and culled birds, with a cause note, per shed per day. A count above the expected curve is flagged to the manager. Action comes sooner.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Flock and shed register. Open a flock for each placement with the shed, hatchery, breeder flock, chick count and grade, and every later entry carries the same number through to the final lift. One number, one history.
  • Daily shed sheet. Capture mortality, culls, feed opened, water reading and temperature per shed on a phone. A count above the breed curve alerts the manager the same morning, before the next shed is walked, so the warning comes early.
  • Feed bins and issue. Record bulk or bagged feed received bin by bin and then issued to each flock, with returns noted, so that conversion is read against the feed lot actually used. Memory plays no part.
  • Weights and growth targets. Save weekly sample weighings for each flock and compare them with the target for the breed, so a lagging shed is seen early. A flat curve raises a flag for the manager.

Operational bottlenecks to check

The daily sheet never reaches the office

Mortality and feed figures are written on a board in the shed and copied weekly. A rising death count in shed three is noticed after the loss is already large. That is costly.

Poor conversion has no visible cause

Feed bags leave one shared store with no flock number written against them. When birds eat more but gain less, the owner cannot tell whether the ration, the drinkers or the day-old stock caused it. It is guesswork.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Placement

    Chicks are counted at the gate and entered against a shed with the hatchery, breeder flock and grade, and a flock number opens at that moment. It stays with every later entry until the shed is cleaned out.

  2. 2. Brooding and daily sheet

    Supervisors record mortality, culls, feed opened, water and temperature for each shed every morning, and counts above the expected curve are flagged for the manager. A brooding problem reaches the manager while it is still small.

  3. 3. Feed and health

    Feed is issued from bins to a flock, vaccines are logged with the batch used, and every medicine course carries a withdrawal end date. A vet visit is noted too. Each lands on the flock concerned.

  4. 4. Growth checks

    Weekly sample weights are saved and set against the breed target, so the manager sees which sheds are ahead of the curve and which are behind it. Gaps show against the curve.

  5. 5. Lift or egg dispatch

    Broiler flocks are scheduled for catching, with a weighbridge slip for every truck, while layer houses send graded trays to dealers against a signed count. Any shortage is noted at the door.

  6. 6. Settlement and closure

    Sale bills, buyer claims and grower settlements are raised from the recorded figures. Then the shed is cleaned and rested, and the flock closes with its final conversion and margin on the sale.

Industry reports to connect with

  • Flock summary with placement, mortality, feed used and final feed conversion
  • Mortality by shed, day and recorded cause
  • Feed received, issued and left in each bin
  • Sample weight against breed target by week

Questions before implementation.

When should poultry farms consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements