Skip to main content
GullySystem
Automotive

Job Cards for PPF installation centres

Track accepted PPF panels through preparation, material allocation, installation, inspection and handover.

Field Service

Does this function belong in your operation?

Use when PPF installations require panel-level evidence, material tracking and handoffs between preparation, fitting and inspection.

A vehicle is received against an accepted film and panel-coverage scope.

A film job needs to show which panels were fitted, which material was used and who reviewed the edges and finish. A whole-car completion tick hides unfinished or repeated panel work.

Bring the records the workflow depends on.

  • Vehicle condition and accepted panel list
  • Selected film, roll or kit reference and material issues
  • Pattern reference where used and responsible installer assignments
  • Panel inspection findings, rework and release evidence

Outputs to check

  • Panel-level PPF work history
  • Film-linked inspection and rework record
  • Coverage reconciliation and handover file

Follow the job cards workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Open the coverage record

    Attach intake photographs and accepted panels, boundaries and exclusions. Keep existing treatment or surface questions visible for specialist assessment.

  2. 2. Prepare the panel work

    Record the actual film and roll or kit allocation. Where a template is used, retain its vehicle and panel reference and the operator’s suitability review.

  3. 3. Record installation handoffs

    Update completed panel work and material use with the responsible installer. A new panel or unexpected condition returns for the required scope decision.

  4. 4. Inspect and track correction

    Compare actual coverage with the accepted list. Record edge and finish findings and link any replacement material or rework to the original panel entry.

  5. 5. Record release and documents

    Retain the responsible handover decision, supplied care document and customer acknowledgement. Manufacturer registration remains a separate task requiring an actual response where applicable.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Coverage adviser

Keeps the accepted panel version and customer changes available.

Installer or cutting operator

Records material and template references where used, then the actual panel work performed.

Inspector

Documents edge and finish findings and the outcome of any correction before release.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Template reference does not match the vehicle

Record the mismatch and hold affected cutting preparation for the operator’s decision.

Inspection rejects a fitted panel

Retain the first result and create linked correction work with its actual material use.

Customer asks for additional coverage

Keep the request separate until the quote and work-authorisation records are updated.

Can this work independently?

Job cards can begin from manual coverage and material references. Stock, pattern software and bay planning add data only through verified handoffs. A selected pattern or issued film does not establish completed installation.

Systems and records it connects with

  • Quotations: current accepted film and panel coverage.
  • Stock: roll or kit issues, usable returns and rework material.
  • Pattern records: authorised reference exchange where the centre uses such software.
  • Support: later panel concerns linked to original inspection evidence.

Configure, test and introduce the workflow.

  • Trace one panel and one wider-coverage job through material, installer and inspector handoffs. Define the evidence each person records.
  • Trial a wrong pattern, added panel and rejected edge review. Confirm the original work and material history stay intact.
  • Reconcile open vehicles to accepted coverage and unfinished panels before use. Assign ownership of inspection and handover records.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Each completed panel links to the accepted scope and actual film identity.
  • Rework preserves the original finding and additional material reference.
  • Final coverage reconciles to the accepted list with unresolved items retained.
PPF installation centres

How the business operates.

Two PPF quotations can name the same car and still cover different panels. The installation centre needs an accepted coverage list before film is allocated or a pattern is selected. Track the actual film, roll or kit, panel work and installer handoffs through final inspection. Paint protection film is a physical material fitted to the agreed surfaces; this workflow centres on automotive painted panels. It records the specialist’s decisions without prescribing cutting or fitting methods, promising damage protection or assuming manufacturer authorisation.

Coverage and intake desk

Identify the vehicle variant and requested panels. Retain condition photographs, existing film or treatment questions and the chosen product. Describe boundaries and exclusions in the accepted scope rather than relying on an undefined package name.

Film stores and cutting preparation

Reserve the identified film or supplied kit against the job. Where pattern software is actually used, retain the selected vehicle and panel reference. Record material issued, cuts, usable offcuts and losses using consistent units.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Vehicle specification, intake condition and existing film or surface-treatment findings
  • Accepted panel-coverage list, boundaries, exclusions and selected film
  • Quotation revisions and customer decisions on added or changed coverage
  • Film product, roll or kit identifier, unit and relevant batch reference

Operational bottlenecks to check

A package name hides missing panels

Make the accepted coverage list the instruction for both cutting and inspection. An excluded area stays identifiable when the customer later asks what was installed.

Roll totals hide an unusable remnant

A remaining length does not establish that a piece suits the next panel. Keep dimensions or the studio’s accepted usability record alongside the material identity and reservation.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Inspect and define coverage

    Record the exact vehicle and requested panels with intake condition. The specialist assesses suitability and existing treatments. Keep any unresolved surface question visible before accepting the final installation scope.

  2. 2. Agree the film and panel list

    Quote the actual product and included panels, with boundaries and exclusions the customer can review. Preserve alternatives and record the selected version. An added panel needs a revised decision.

  3. 3. Prepare the material and cutting record

    Confirm the roll or kit and its usable quantity. If pattern software is used, identify the relevant vehicle and panel reference. A stored pattern name is not proof of fit; the responsible operator checks it.

  4. 4. Record panel work and material use

    Link each installation handoff to the panel and product. Record cuts, issued material and usable returns. Unexpected surface findings or a changed coverage request return for assessment before affected work continues.

  5. 5. Inspect and handle rework

    Compare installed panels with the accepted list and record edge, finish or other inspection findings. Keep rejected material and replacement work linked to the original panel instead of erasing the first attempt.

  6. 6. Release and hand over

    Retain the responsible release decision, care document and customer acknowledgement. Keep any manufacturer-registration response distinct from job completion. Later concerns use the original panel, material and inspection evidence.

Industry reports to connect with

  • Quotes and jobs with unsettled panel-coverage decisions
  • Film and kit reservations against accepted work
  • Material issued, usable offcuts and losses by roll and job
  • Panel progress, inspection holds and rework references

Questions before implementation.

When should ppf installation centres consider job cards?

Use when PPF installations require panel-level evidence, material tracking and handoffs between preparation, fitting and inspection. A vehicle is received against an accepted film and panel-coverage scope.

What should we bring to the requirements discussion?

Bring anonymised examples of Vehicle condition and accepted panel list; Selected film, roll or kit reference and material issues; Pattern reference where used and responsible installer assignments; Panel inspection findings, rework and release evidence. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track accepted PPF panels through preparation, material allocation, installation, inspection and handover. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The card does not prescribe cutting, heating or fitting methods or establish damage protection. Qualified staff own suitability, workmanship review and release decisions.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Each completed panel links to the accepted scope and actual film identity. Use this check when reviewing the first working version.

Talk to us

Discuss job cards for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements