Skip to main content
GullySystem
Manufacturing

Work Order Management for Rubber gasket manufacturers

Track a production job from material issue to completed output.

Manufacturing

Does this function belong in your operation?

Use when physical production needs a job-level record of materials and output.

A production plan releases a specific job.

A work order sends the cutting file or die number, the sheet and the quantity to the shop. The operator records pieces cut and rejects. A reorder copies the earlier order.

Bring the records the workflow depends on.

  • Required output
  • Approved material list
  • Process steps and due dates

Outputs to check

  • Released production-job record
  • Material and output reconciliation
  • Work-in-progress and variance list

Follow the work order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Release the job

    Record output quantity, instructions and the approved material version.

  2. 2. Issue resources

    Link materials and assigned production stages to the work order.

  3. 3. Record progress

    Capture completed operations, interruptions and additional material requests.

  4. 4. Inspect output

    Pass the produced quantity to the agreed quality or acceptance check.

  5. 5. Close the job

    Reconcile accepted output, scrap, unused material and unfinished quantities.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Production in-charge

Releases jobs, moves them between stages, and holds the ones waiting on material with a reason typed in.

Supervisor

Marks the stage done from a tablet near the machine.

Storekeeper

Issues material against the job number and sees what is still due to it.

Owner

Looks at what is late, and at what is late for the same reason every week.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Material issued beyond plan

Record the reason and obtain the required approval.

Output below target

Keep the uncompleted balance or close it with an authorised shortfall reason.

Job paused mid-process

Retain work-in-progress quantities and the stage from which work will resume.

Can this work independently?

A work order needs an output definition and process instructions. It can use entered materials and progress, but bill-of-materials, stock and quality links make execution traceable. Sales orders provide demand; closing production is not the same as dispatching or invoicing the finished goods.

Systems and records it connects with

  • Bill of materials: Approved component quantities and production-definition versions.
  • Production planning: Demand, planned quantities and resource or material constraints.
  • Stock: Item-location quantities and authorised stock movements.
  • Job work delivery notes: Material dispatch and return references for outside processing.

Configure, test and introduce the workflow.

  • Tell us the stages a job passes through, in your words. A stage list comes back to confirm.
  • Sales orders are connected, and so is the bill of materials. A sample work order draws on each. A screen shows jobs by stage. The supervisor tries it beside the whiteboard.
  • Supervisors and the store use live work orders. The whiteboard is retired after a trial period.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Output links to its work order.
  • Material usage is traceable.
  • Unfinished quantities remain visible.
Rubber gasket manufacturers

How the business operates.

A rubber gasket shop supplies the flat ring, the full-face gasket, the door seal and the sump gasket. Each sits between two parts. Its job is to keep a fluid or a gas where it belongs. Some are cut from sheets of nitrile, EPDM, neoprene or silicone with steel rule dies, a water jet or a knife cutter. Others are moulded or extruded and joined into loops. Each type needs its own record.

Drawings, patterns and revisions

Hold each part’s drawing, photo or pattern with its revision, material and tolerance, so a repeat order cuts the right shape.

Sheet stock by grade and thickness

Receive sheets by rubber grade, hardness, thickness and size, and issue them to jobs with the offcut returned to stock.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Part numbers, drawings and patterns. Hold sketch, rubbing, DXF and revision under one part number, with compound, Shore hardness and tolerance band.
  • Quotations by sheet yield. Price a gasket from sheet cost, expected nesting yield, knife time and finishing, then set the figure beside the yield the job actually returned.
  • Sheet and profile stock. Receive sheets by compound, hardness, thickness and size, and extruded profile by section and coil length, then issue each against jobs.
  • Offcut register. Return leftover sheet with its dimensions to stock, so the next small order is cut from a remnant before a full sheet leaves the rack.

Operational bottlenecks to check

Drawings arrive in whatever form the buyer sends

A hand sketch, a photo of an old gasket and a drawing file all arrive for the same part. With no revision on record, a repeat order is cut from whichever copy turns up first, and the buyer sees the difference.

Nesting waste is invisible

Operators nest parts on a sheet by eye, and the offcut goes on a pile. The yield of each job is unknown, so quotes ignore it. Waste is money on a pile.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and pattern

    A buyer sends a sketch, a drawing or a worn gasket. The estimator records inside diameter, outside diameter, bolt circle, hole count, thickness and compound, and files the rubbing.

  2. 2. Cutting file or die

    A knife file or steel rule die is made and filed under the part number. A first piece is cut and checked against the drawing with a vernier caliper.

  3. 3. Sheet issue

    Stores issue sheets by compound, Shore hardness and thickness. The operator nests the parts on the plotter bed, and the sheet area used is written to the order.

  4. 4. Cutting and finishing

    Parts are cut by clicker press, oscillating knife or water jet. Bolt holes are punched, edges cleaned and pressure sensitive backing applied where the drawing asks.

  5. 5. Splicing and inspection

    Extruded profile is mitred to length and bonded into loops. Inspectors check bolt hole positions, thickness and the corner bond with a pull test.

  6. 6. Kit, pack and deliver

    Parts are counted into labelled bags or kits, and a delivery note naming the compound travels with the carton. The invoice follows.

Industry reports to connect with

  • Orders by stage with sheet area used
  • Nesting yield by job, compound and operator
  • Offcut stock by compound and size
  • Dies and blades past their impression limit

Questions before implementation.

When should rubber gasket manufacturers consider work order management?

Use when physical production needs a job-level record of materials and output. A production plan releases a specific job.

What should we bring to the requirements discussion?

Bring anonymised examples of Required output; Approved material list; Process steps and due dates. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track a production job from material issue to completed output. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This is a production work order; field repairs and customer visits belong in job cards.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Output links to its work order. Use this check when reviewing the first working version.

Talk to us

Discuss work order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements