Skip to main content
GullySystem
Other industries

Stock Tracking and Alerts for Solar inverter manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Counts of control boards, capacitors, IGBT stages and enclosures are watched against open work orders. Alerts name the shortfall and the lead time. Stores avoid stopping a line for one missing connector.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Solar inverter manufacturers

How the business operates.

An inverter is a small power plant in a box, sealed against dust and heavy rain and expected to run unattended on a roof for years. Electrolytic capacitors, IGBT modules, Hall-effect current sensors and the DSP board arrive from different suppliers in different lots. Parts change when a supplier revises a datasheet. A unit trips in the field after a year. Which parts did it contain?

Board and component lot receiving

Log IGBT modules, DC-link capacitors, PCBs and enclosures by lot, with supplier and storage bin, so each serial can name its parts.

Kits and work orders

Issue a kit per work order against the inverter’s bill of materials, and keep the board assembler’s deliveries visible beside it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Inverter model master and bills of materials. Record every model’s rating, control and gate driver boards, IGBT modules, heatsink, enclosure and nameplate labels. Earlier revisions are kept whenever the list is altered.
  • Component and board lot receiving. Log lots of power modules, DC link capacitors and populated boards, including deliveries from an outside board assembler, with supplier and stores bin.
  • Kits and work orders. Release a work order for a quantity of units and issue a kit to match. Any shortfall of boards or enclosures is shown to stores before the kit is picked.
  • Assembly station tracking. Record operator, station and torque wrench check against each serial as it passes through IGBT mounting and busbar wiring.

Operational bottlenecks to check

Firmware images drift across a pallet

Units on one pallet carry different builds because the flashing station was updated mid-shift. Nobody can say which unit holds which. Support guesses from the label.

Component lots are not captured

Film capacitors and gate-driver chips come off open reels and trays. When a field failure points to one part, the affected serials cannot be listed.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Order and work order

    A buyer’s order names the model, kilowatt rating, phase and quantity. The planner issues a work order, which pulls a kit against the bill of materials.

  2. 2. Receiving and kitting

    Control boards, IGBT modules, DC link capacitors, inductors and enclosures are received by lot. Stores issue a kit and record which lots went to which work order.

  3. 3. Assembly

    Operators bolt the IGBT stack to the heatsink with thermal paste, wire the unit and torque the busbar terminals. Operator and station are recorded against the serial.

  4. 4. Flashing and burn-in

    The firmware image and grid-code parameter set are flashed and logged. The unit then runs at rated load in the rack, and hours and heatsink temperatures are saved.

  5. 5. Test and labelling

    Output voltage, efficiency points, residual current trips, insulation resistance and RS485 communication are checked against model limits. Passing units get the rating label with its serial.

  6. 6. Dispatch and warranty

    Scanning a carton at the dock checks it against the sales order, and the buyer receives the inverter serials packed inside. A warranty record opens with the dispatch and commissioning dates.

Industry reports to connect with

  • Units by model through burn-in and final test
  • Firmware version installed, by serial and date
  • Failure codes by model and component lot
  • Returns and repairs by serial and visit count

Questions before implementation.

When should solar inverter manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements