Skip to main content
GullySystem
Other industries

Batch and Serial Tracking for Solar inverter manufacturers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

MOSFET lots, capacitor lots and firmware images are tied to the unit serial. A field fault reported by an installer points back to the parts. Recall lists are drawn from the record.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Solar inverter manufacturers

How the business operates.

An inverter is a small power plant in a box, sealed against dust and heavy rain and expected to run unattended on a roof for years. Electrolytic capacitors, IGBT modules, Hall-effect current sensors and the DSP board arrive from different suppliers in different lots. Parts change when a supplier revises a datasheet. A unit trips in the field after a year. Which parts did it contain?

Board and component lot receiving

Log IGBT modules, DC-link capacitors, PCBs and enclosures by lot, with supplier and storage bin, so each serial can name its parts.

Kits and work orders

Issue a kit per work order against the inverter’s bill of materials, and keep the board assembler’s deliveries visible beside it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Inverter model master and bills of materials. Record every model’s rating, control and gate driver boards, IGBT modules, heatsink, enclosure and nameplate labels. Earlier revisions are kept whenever the list is altered.
  • Component and board lot receiving. Log lots of power modules, DC link capacitors and populated boards, including deliveries from an outside board assembler, with supplier and stores bin.
  • Kits and work orders. Release a work order for a quantity of units and issue a kit to match. Any shortfall of boards or enclosures is shown to stores before the kit is picked.
  • Assembly station tracking. Record operator, station and torque wrench check against each serial as it passes through IGBT mounting and busbar wiring.

Operational bottlenecks to check

Firmware images drift across a pallet

Units on one pallet carry different builds because the flashing station was updated mid-shift. Nobody can say which unit holds which. Support guesses from the label.

Component lots are not captured

Film capacitors and gate-driver chips come off open reels and trays. When a field failure points to one part, the affected serials cannot be listed.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Order and work order

    A buyer’s order names the model, kilowatt rating, phase and quantity. The planner issues a work order, which pulls a kit against the bill of materials.

  2. 2. Receiving and kitting

    Control boards, IGBT modules, DC link capacitors, inductors and enclosures are received by lot. Stores issue a kit and record which lots went to which work order.

  3. 3. Assembly

    Operators bolt the IGBT stack to the heatsink with thermal paste, wire the unit and torque the busbar terminals. Operator and station are recorded against the serial.

  4. 4. Flashing and burn-in

    The firmware image and grid-code parameter set are flashed and logged. The unit then runs at rated load in the rack, and hours and heatsink temperatures are saved.

  5. 5. Test and labelling

    Output voltage, efficiency points, residual current trips, insulation resistance and RS485 communication are checked against model limits. Passing units get the rating label with its serial.

  6. 6. Dispatch and warranty

    Scanning a carton at the dock checks it against the sales order, and the buyer receives the inverter serials packed inside. A warranty record opens with the dispatch and commissioning dates.

Industry reports to connect with

  • Units by model through burn-in and final test
  • Firmware version installed, by serial and date
  • Failure codes by model and component lot
  • Returns and repairs by serial and visit count

Questions before implementation.

When should solar inverter manufacturers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements