Skip to main content
GullySystem
Other industries

Bill of Materials for Solar inverter manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

An inverter model lists its power stage, control board, heatsink, inductors, capacitors and enclosure, each with revision. A board change updates the kit for the next work order. Design revisions stop reaching stores late.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Solar inverter manufacturers

How the business operates.

An inverter is a small power plant in a box, sealed against dust and heavy rain and expected to run unattended on a roof for years. Electrolytic capacitors, IGBT modules, Hall-effect current sensors and the DSP board arrive from different suppliers in different lots. Parts change when a supplier revises a datasheet. A unit trips in the field after a year. Which parts did it contain?

Board and component lot receiving

Log IGBT modules, DC-link capacitors, PCBs and enclosures by lot, with supplier and storage bin, so each serial can name its parts.

Kits and work orders

Issue a kit per work order against the inverter’s bill of materials, and keep the board assembler’s deliveries visible beside it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Inverter model master and bills of materials. Record every model’s rating, control and gate driver boards, IGBT modules, heatsink, enclosure and nameplate labels. Earlier revisions are kept whenever the list is altered.
  • Component and board lot receiving. Log lots of power modules, DC link capacitors and populated boards, including deliveries from an outside board assembler, with supplier and stores bin.
  • Kits and work orders. Release a work order for a quantity of units and issue a kit to match. Any shortfall of boards or enclosures is shown to stores before the kit is picked.
  • Assembly station tracking. Record operator, station and torque wrench check against each serial as it passes through IGBT mounting and busbar wiring.

Operational bottlenecks to check

Firmware images drift across a pallet

Units on one pallet carry different builds because the flashing station was updated mid-shift. Nobody can say which unit holds which. Support guesses from the label.

Component lots are not captured

Film capacitors and gate-driver chips come off open reels and trays. When a field failure points to one part, the affected serials cannot be listed.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Order and work order

    A buyer’s order names the model, kilowatt rating, phase and quantity. The planner issues a work order, which pulls a kit against the bill of materials.

  2. 2. Receiving and kitting

    Control boards, IGBT modules, DC link capacitors, inductors and enclosures are received by lot. Stores issue a kit and record which lots went to which work order.

  3. 3. Assembly

    Operators bolt the IGBT stack to the heatsink with thermal paste, wire the unit and torque the busbar terminals. Operator and station are recorded against the serial.

  4. 4. Flashing and burn-in

    The firmware image and grid-code parameter set are flashed and logged. The unit then runs at rated load in the rack, and hours and heatsink temperatures are saved.

  5. 5. Test and labelling

    Output voltage, efficiency points, residual current trips, insulation resistance and RS485 communication are checked against model limits. Passing units get the rating label with its serial.

  6. 6. Dispatch and warranty

    Scanning a carton at the dock checks it against the sales order, and the buyer receives the inverter serials packed inside. A warranty record opens with the dispatch and commissioning dates.

Industry reports to connect with

  • Units by model through burn-in and final test
  • Firmware version installed, by serial and date
  • Failure codes by model and component lot
  • Returns and repairs by serial and visit count

Questions before implementation.

When should solar inverter manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements