Skip to main content
GullySystem
Manufacturing

Service Reports and Proof of Visit for Transformer manufacturers

Record work performed and the evidence of a service visit.

Field Service

Does this function belong in your operation?

Use when customers or managers require a documented account of field work.

A technician completes a visit or service activity.

Visits for oil leaks, tripped relays or overheating are recorded against the unit’s serial. Parts used and the fault found are noted. Warranty is checked from the dispatch record.

Bring the records the workflow depends on.

  • Job reference
  • Required report fields
  • Evidence and customer-acknowledgement rules

Outputs to check

  • Approved visit report
  • Work and evidence history
  • Unresolved-work and billing inputs

Follow the service reports and proof of visit workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Identify the visit

    Link the report to the job, customer and assigned worker.

  2. 2. Capture the work

    Record findings, tasks performed and material used.

  3. 3. Attach evidence

    Collect the required photographs or acknowledgements under the agreed permissions.

  4. 4. Review the report

    Check missing information and unresolved issues before approval.

  5. 5. Issue and retain

    Share the approved version and preserve later corrections as revisions.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Technician

Fills a short form, takes two photographs, gets the signature and leaves.

Service coordinator

Checks submitted reports for missing evidence and follows unresolved findings with the assigned technician.

Accounts assistant

Bills the extra work from the report and not from a phone call.

Owner

Opens any visit from last year and reads what was done.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Customer unavailable to acknowledge

Record that fact and use the agreed alternative evidence.

Required photo missing

Keep approval pending or record an authorised exception.

Report corrected after issue

Retain the original, issue a revision and identify who received the correction.

Can this work independently?

A report can be recorded independently against a customer and job reference. Job cards, contracts and scheduling supply context; billing uses only approved chargeable work. Photos or acknowledgements support the report but do not substitute for a professional safety or completion certificate.

Systems and records it connects with

  • Job cards: Service findings, approved work, parts and completion records.
  • Technician scheduling: Assigned field jobs and technician availability.
  • AMC contracts: Contract coverage, dates and planned service obligations.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • We look at your current slips or books. You show us what a customer expects to receive. A sample report layout comes back.
  • Checklists for each type of job are drafted. Supervisors correct them. The report is tied to job cards and the material issued to each technician. Coordinators confirm the numbers add up.
  • A small group of technicians completes reports on their phones during real visits. Their feedback shapes the screens. Sending by message or email is switched on. The duplicate book is retired after a final check.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Reports link to the correct job.
  • Required evidence is present before approval.
  • Corrections retain the earlier issued version.
Transformer manufacturers

How the business operates.

A transformer order starts as a tender with a kVA rating, voltage ratio, vector group, impedance and loss limits. You price core steel, winding copper or aluminium, insulation, oil and tank, then commit to no-load and load loss figures that the customer can penalise. The design sheet comes next. It fixes core dimensions, turns per coil and the tap range, and the shop cuts every lamination and orders the oil from it.

Tender and loss commitments

Price a unit from steel, copper, oil and tank, and keep the no-load and load loss limits quoted to the buyer beside the order.

Design sheets and revisions

Hold the core, coil and tap data per unit, with each revision released to the shop.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Transformer tenders. Cost a unit from core steel, winding copper, insulating oil and tank fabrication, and keep each revision of the offer that went to the buyer.
  • Loss commitment register. Store the no-load loss, load loss and impedance limits promised to each buyer, beside the tender that made the promise.
  • Design sheet control. Hold core, coil and tap data per unit, with each buyer comment round and the released revision.
  • Core steel lots. Receive CRGO coils by lot and weight, and book cut laminations and slitting scrap to each core.

Operational bottlenecks to check

Loss limits are quoted, then forgotten

The tender commits to no-load and load loss limits, but the bay works from the design sheet alone. A unit passes routine tests and still sits above the figure quoted to the buyer. The penalty arrives with the invoice.

Core steel is not traced to a unit

Silicon steel coils arrive by lot and weight, get slit and cut, and the offcut is counted by eye. Months later, a unit with high core loss cannot be tied to the coil it came from.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Tender

    A buyer sends rating, ratio, vector group, impedance and loss limits. The unit is priced from steel, winding copper, oil and tank, and the loss commitments are stored with the offer.

  2. 2. Design release

    The design office issues core dimensions, coil data and the tap range. Buyer comments are logged round by round, and only the approved revision goes to the shop.

  3. 3. Material booking

    CRGO coils and winding wire are booked to the unit by lot and weight. A shortage shows against the unit before the cut-to-length line starts.

  4. 4. Core, coil and tanking

    Laminations are cut and stacked with mitred joints. Coils are wound and fitted, then the active part is vacuum dried, tanked and filled with oil. The supervisor marks each stage complete.

  5. 5. Test and inspection

    Routine tests are entered against the promised values. A buyer’s inspector is booked, and the outcome is saved to the unit.

  6. 6. Dispatch and service

    Rating plate, test report and packing list go out with the unit. Later repair, rewind or warranty calls are logged against its serial.

Industry reports to connect with

  • Units by build stage and rating
  • Promised against measured losses per unit
  • Core steel and wire consumed by order
  • Inspector bookings and results

Questions before implementation.

When should transformer manufacturers consider service reports and proof of visit?

Use when customers or managers require a documented account of field work. A technician completes a visit or service activity.

What should we bring to the requirements discussion?

Bring anonymised examples of Job reference; Required report fields; Evidence and customer-acknowledgement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record work performed and the evidence of a service visit. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Photos, location and signatures need appropriate permissions; visit evidence does not prove workmanship quality.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Reports link to the correct job. Use this check when reviewing the first working version.

Talk to us

Discuss service reports and proof of visit for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements