Skip to main content
GullySystem

Grade and stack stock for a fertiliser shed

Grade and warehouse stock holds every bag by grade, pack size, shed and stack. Grades that empty first once rain starts carry a reorder level. The counter knows which bay to send a loader to. The owner sees what is low before a queue forms.

What the fertiliser stock record holds

Lines are kept one for each grade in each pack size on each stack, and never as a single number for the whole shop. Four kinds of detail sit on a line. Each one answers a question the counter asks across the day.

Grade and pack size

Each line names the grade as printed on the bag, such as urea or complex NPK 10:26:26, and the pack weight. A 50 kg bag and a smaller pack of one grade stay separate. Two white bags never share a name.

Shed, bay and stack

Bags sit on wooden dunnage in a bay, and the record keeps the shed, bay and stack for each lot. The loose-bag corner has its own place. A loader reading the screen can walk straight there.

Reorder level by grade

Every grade carries a level below which it is flagged. Grades that empty first once rain starts and sowing begins get higher levels than slow sellers. The flag turns on the day itself. It does not wait for month end.

Movements and counts

Stock changes only by a recorded movement: a truck in, a sale out, a write-off or a transfer between sheds. A physical count can be entered beside the book figure. A gap is shown, not hidden.

A stock day in shed and at counter

Stock is read all day, by people with different questions. A loader wants a bay. A counter clerk wants a grade that is on hand, and the owner wants to know what is about to run out. Four scenes show the record in use.

Forty bags for a waiting tractor

A farmer asks for forty bags of urea. The clerk sees which stack holds them and tells the loader the bay number. No one walks the shed to look. The tractor leaves with the right bags.

First rains on the horizon

Before the rains, the owner opens the grades below reorder level. Complex grade B shows first on the board. That list goes into the company indent, so lifting starts before the shelves are bare and the queue forms.

Moving stock between sheds

A leaking roof on one shed sends the storekeeper shifting bags to a dry bay. The move is entered as a transfer from one stack to another. Both shed totals change. The grade total stays the same.

A physical count one evening

The storekeeper walks the bays with a phone and enters what is standing. Each stack shows its book figure beside the count. Any gap goes to the owner for checking. Nothing is changed in the book until then.

Who reads grade and stack stock

Shed stock belongs to the shed, but four people read it for different reasons. Each sees the same lines through a different question. Nobody keeps a private tally of what is on hand. That is the point.

For the storekeeper

Records where each lot sits and keeps the stacks honest. Sees the book figure for every stack before a count. A change of place is entered as a movement. It never goes unrecorded, even for ten bags.

For counter staff

See each grade on hand with its stack before quoting a bag count to a farmer. A grade that is out stays visible as out. No clerk promises forty bags that are not there. The shed backs the promise.

For the owner

Reads stock by grade, pack size and stack, and the grades below reorder level. A glance replaces a walk with a torch. The list of low grades is ready before the call to the company.

For delivery crews

See which bay to load a village run from, so the trolley is filled from one place. The count loaded comes from stock. It is compared with the count dropped when the run is closed.

Decisions to settle before stock is loaded

A record is only as good as its first entry. Four decisions made early with the owner and storekeeper decide whether stock can be trusted from the first live bill. Each takes one short conversation.

Who may move or adjust stock for grade and warehouse stock

Decide who records a transfer and who may change a book figure after a count. A storekeeper can move bags between bays. An adjustment is better left with the owner. Write the rule before go-live.

What is left out of stock for grade and warehouse stock

Agree where damaged, caked and sample bags sit. Hardened bags should leave saleable stock and appear under write-offs. Counting them as available is how a counter sells bags that cannot go out of the shed.

How opening stock comes across for grade and warehouse stock

Opening stock by grade, pack size and bay is loaded from your ledger. Your office checks it against a physical count. Cut-over is set for a quiet day, outside the sowing peak, so the count is not rushed.

Which report matters first for grade and warehouse stock

Begin with stock by grade, pack size and warehouse stack. Owner and storekeeper compare it to the shed on the first day. Reorder levels are set from that first picture and not from memory. Check it twice.

How stock connects to the rest of the product

Trucks add to it. Sales take from it, write-offs reduce it and reorder flags point back to the company. Five links tie stock to the other features without anyone copying numbers from one sheet to another. Each is listed here.

  • Truck receipts add counted bags to the right stack
  • Farmer sales reduce stock at the grade billed
  • Reorder flags feed the next company indent
  • Write-offs remove hardened bags from saleable stock
  • Delivery runs load bags from a named bay

Where the stock record stops

Stock tells you what the book says is on each stack. It cannot see damp, theft or a bag swapped on the plinth. Count the shed itself. Judging whether a stack is safe stays with the storekeeper. Valuing stock for the accounts stays with the accountant. A shop with a single shelf can count by eye.

FAQ

Frequently asked questions

How are reorder levels chosen for each grade?

The owner sets them grade by grade from what has gone first in earlier seasons. Fast grades get higher levels. Levels can be changed when sowing starts, so the flag follows the real pace of the counter.

Can one grade sit in two bays at once?

Each lot is a line with its own shed, bay and stack. The grade total adds them up. The counter sees where each part sits, so a loader can be sent to the nearer bay.

What does a transfer between sheds do to totals?

A transfer removes bags from one stack and adds them to another as one movement. Shed totals change. Grade totals hold steady. The record shows who moved the bags and when it was done, with a note.

Does it show stock for a single pack size?

Pack size is part of every stock line. A small pack and a 50 kg bag of one grade are counted apart. Read the stock report for one pack on its own, with no mixing.

How do we check the shed against the book?

Walk the bays, enter the standing count beside each stack and read the difference. Small gaps point to a miscount. A large one on a single stack is worth a closer look by the owner.

Where it fits

How this feature fits the system.

Fertiliser Dealer Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Truck receipt and bag count

The count at the gate is booked against the company invoice by grade, and shortages or wrong grades are recorded before the driver signs.

Goods Receipt (GRN)

Grade and warehouse stock

Stock is held by grade, bay and stack, so the counter knows which shed to send a loader to for forty bags.

Warehouse Management

Company allotments and indents

Allotments, lifted quantities and pending balances sit beside each indent, so the next order to the company is placed against real figures and not a remembered total.

Purchase Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements