Skip to main content
GullySystem

Linked alteration jobs for tailoring shops

Alterations open a linked job for each correction on a delivered garment. The job holds the change asked for, the charge if any and the tailor who will do it. A trouser waiting to be taken in has a name against it. Counter staff, tailors and the owner all read one job.

What an alteration job records

An alteration is a small order tied to a garment that has already left the shop. It holds just enough to do the work and to bill it. That is all. Four things are written on it when the customer brings the garment back.

Link to the original garment

Every job points back to the first order, so the figures, the style notes and the tailor of the first stitching are one tap away. A trouser taken in is not a stranger. It has a history.

The change asked for

A line states the correction, such as a trouser taken in at the waist or a blouse loosened at the sleeve. The counter writes it while the customer waits. No slip is tucked into a pocket.

Charge, if any

Some corrections are free because the first stitching was at fault, and some are paid. The amount or a no charge mark sits on the job. Billing then reads that figure. The customer is not surprised.

Named tailor and promised day

Each job carries the tailor who will do it and the day the garment will be ready. Neither is left blank. The garment on the rail has an owner, and the customer has a date.

Alterations through the week at a tailor’s counter

Corrections come in at odd moments, between a trial and a delivery. A customer with a garment on a hanger can arrive at any time. Four moments show how a returned garment becomes a closed job. Each ends in a name.

Trouser brought in at the waist

A customer walks in with trousers bought last season. Counter staff find the original order by phone number and open a linked job. The waist change is written. The charge is set and a tailor is named.

Blouse to be loosened

A blouse delivered last week feels tight across the back. The cutter looks at the saved figures, agrees the sleeve and back can be eased, and marks the job no charge. A tailor takes it that afternoon.

Tailor opening the repair list

Each morning a tailor opens the alteration jobs assigned to them on a phone. Each shows the change asked for and the day promised. Done pieces wait on the ready rail. They are marked first.

Owner closing out the week

On Saturday evening the owner reads the report of alterations opened, charged and closed by garment type. Open jobs past their day stand out in the list. A short call to a tailor settles the rest. Nothing waits on a rail unclaimed.

Who handles alterations and what each sees

Alterations are small, so several people touch them in passing. A clear rule on who sees what avoids confusion. Four roles are described here. Each has a defined part in the job.

Owners watching charges and delays

Owners read the alterations opened, the alterations charged and the jobs still open. They see which garment types keep returning for correction. That points to a fault at the bench. The fix belongs to the owner.

Counter staff opening the job

Counter staff open the linked job, write the change asked for, set the charge when it is agreed and name the tailor. They hand the garment on. When it returns, they close the job and take payment.

Master cutters judging the fault

Master cutters see the original figures and decide whether a correction is the shop’s fault or a change of taste. That judgement sets whether a charge applies. A cutter may also take the job. That call is the cutter’s.

Tailors and finishers doing the work

Tailors and finishers see the jobs assigned to them, with the change asked for and the day promised. Each is marked done when the garment is ready. Their phone shows nothing that belongs to a colleague. Jobs are claimed by name, not by shout.

Decisions to settle before alterations go live

Alterations raise questions of money and fault, so agree the rules before the first job is opened. Sit with the owner, the master cutter and the counter. Four decisions need a clear answer. Each should have a name beside it.

Who may waive a charge for alterations

Decide who may mark a correction as no charge. If every member of staff can, the till will be generous without anyone noticing. Name one person. The master cutter or the owner keeps the rule plain and easy to explain.

What counts as a covered fix

Write down which corrections the shop treats as its own fault and which are the customer’s change of mind. A hem too short at delivery is one thing. A new waist after a diet is another.

How old garments come across

Garments already delivered are not copied across in bulk. Jobs on slips in the shop are entered before opening day and linked to an order if one exists. Walk-in garments from other shops can be entered as new. Nothing else is copied.

Which report to read first for alterations

Alterations opened, charged and closed by garment type is the first report worth reading. A garment type that keeps returning points to a problem in measuring or stitching. Watch it before the rest. Other reports can wait.

How alterations connect to the rest of the shop

An alteration starts from an order that has been delivered and ends at a receipt. Along the way it borrows measurements, takes a tailor’s time and may carry a charge. Five links join it to the rest of the shop. Each is a record that changes hands.

  • Customer measurements supply the saved figures for the correction
  • Orders and delivery dates hold the garment being corrected
  • Tailor piece-rate pay counts corrections done by each tailor
  • Advances and receipts take payment when a charge applies
  • Ready and trial messages tell the customer the garment is ready

Where alteration jobs stop

Alterations record a correction, its charge and its tailor. That is the whole job. They do not decide whether the shop was at fault or whether a garment can be altered at all, which stays with the master cutter. They do not repair damage by themselves. A counter doing only a few hems a week can keep a ticket book.

FAQ

Frequently asked questions

Can an alteration be done without charge?

A correction can be marked no charge, and the shop decides who may do that. The choice is simple. Billing then shows the garment on the slip with nothing payable for the job. The record stays, so the shop can count free fixes.

What if the garment was stitched somewhere else?

The shop decides whether to accept it. If it is accepted, the job is opened without a link to an earlier order, because none exists. The change, the charge and the tailor are recorded in the same way.

How does the customer know the alteration is ready?

When the job is marked done, a text or mail can go to the customer, as with a new garment. The message is set up during implementation. Nobody at the counter has to type it each time.

Can one garment have two alterations?

A second job can be opened against the same garment, and both stay linked to the original order. Each has its own change, charge and tailor. The history on the garment shows every correction in sequence.

How is the alteration charge collected?

The charge is added to the balance. Collection happens at the counter, with a receipt like any other part payment. If the shop allows an advance on repairs, it is posted against the job and shown on the screen.

Where it fits

How this feature fits the system.

Tailoring Shop Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Orders and delivery dates

Each garment is booked with its style notes, fabric source and promised day, and the counter sees how many pieces are already due on that day.

Order Management

Trial fittings

Trial slots are held against the cutter and the order, so a customer arrives for a fitting when the garment is basted and ready to try.

Appointment Scheduling

Cutting and stitching board

Every open garment sits on the board by stage with its tailor and days left, from cut and tagged through stitching to pressing.

Work Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements