Skip to main content
GullySystem

Fabric and trims stock control for tailors

Fabric and trims stock logs customer cloth by the length received and counts the lining, buttons, zips, threads and interfacing on the shelves. Reorder levels sit on the items that run out first. The cutter knows what is on hand before opening a roll, and the owner reads what is running low.

What the stock records hold in a tailoring shop

Two kinds of stock are kept apart. Customer cloth belongs to the customer and passes through the shop. Shelf items belong to the shop and are used up. Mixing them causes arguments. Each kind has its own records, described here in four groups.

Customer cloth by length

Cloth arrives folded in a bag with a name on a slip. The length received is entered against the customer and the order at once. Nothing is left to memory. A figure on file replaces the recollection of whoever took the bag in.

Shelf items counted by type

Lining, buttons, zips, threads and interfacing are counted on the shelves and entered by type, colour and size. Counts change when items are issued to an order. The list matches the cupboard. Each line shows the unit in which the item is counted.

Reorder levels on fast items

A reorder level is set on the items that run out first, such as black satin lining or the zips in daily use. Below that level, the item appears on a low list. Slow items need no level.

Leftover cloth after cutting

After cutting, the length left over is noted against the order. At delivery the customer is told what was used and what is handed back. A leftover piece is no longer an argument. Cut length and returned length are both on record.

Fabric and trims through a tailor’s working week

Stock moves at the counter, at the cutting table and at the shelf. A tailoring shop touches it every day, even on a day with no new order. Each leaves a record that can be found later.

Cloth arriving in a carrier bag

A customer leaves cloth for two shirts at the counter. Staff measure the length against the metre rule, enter it and attach it to the booking. The slip shows the length received. The customer can see it was written down.

Issuing lining at the cutting table

A cutter cuts a jacket and issues lining, interfacing and buttons against the order number. Each issue lowers the shelf count by the amount taken. Trims can be traced back to their garment. That is useful when a button is questioned.

Evening count on the shelves

At closing, a finisher counts zips and threads on one shelf and corrects any difference. A short count is entered at once. Memory is fresh then. The list stays close to what a hand would find.

Low lining flagged before a rush

The owner opens the low list and sees black satin lining below its reorder level. The supplier is called that day. Cutting does not stop for lack of one roll, and the wedding orders stay on schedule.

Who sees fabric and trims stock in the shop

Stock is handled by a few people but read by all four roles. Entries are limited by the rules agreed during set-up, and the owner chooses those rules.

Owners watching what runs low

Owners read the list of lining, buttons and zips below reorder level, and the report of customer cloth received, cut and returned. They do not count shelves. The numbers arrive without a walk to the cupboard.

Counter staff receiving customer cloth

Counter staff enter the length of cloth a customer leaves and tie it to the booking. They can see whether cloth is on hand for an order. Shelf items are issued only by the cutter.

Master cutters issuing trims

Master cutters check cloth in, cut it and issue trims against the order number. Leftover length is recorded by them. Every issue is one line, so a count of the shelf can be checked later.

Tailors and finishers requesting items

Tailors and finishers name the buttons, thread or zip a garment needs, and the cutter issues it. The phone shows the assigned piece with its trims and its order number. Nothing is fetched on a guess.

Decisions to settle before stock set-up

Stock is only as good as the habits around it, so agree a few rules before the first count is entered. Ask the master cutter and the person who buys notions to join. Four choices come first.

Who may adjust a count for Fabric and trims stock

Decide who may correct a shelf count after a recount. One named person is the simplest rule. The shop chooses. Every correction shows as an entry, so a quiet change to a figure is visible later.

What the shelves leave out

Not every button needs a count. Leave out loose odds and ends that cost little, and count the lining, zips, threads and interfacing that stop a job when they run short. A shorter list is easier to keep right.

How stock counts come across

Before opening day the shelves are counted once, and the counts are entered by type. Customer cloth already in the shop is logged with its length and its owner. Those figures become the starting point.

Which report to read first for Fabric and trims stock

Start with lining, buttons and zips below reorder level. It points straight to a purchase. Reading it costs nothing. The report of customer cloth received, cut and returned follows once cloth is logged at the counter.

How stock connects to orders and cutting

Stock sits between the counter and the cutting table. Cloth is logged at booking and issued at cutting, and trims are issued against the same order. Low items go to the owner. Five hand-offs are listed here, each one a record passed from stock to another part of the shop.

  • Orders and delivery dates name the cloth source
  • Cutting and stitching board shows when cloth was cut
  • Customer measurements guide how much cloth is cut
  • Delivery slips record leftover cloth handed back
  • Uniform and bulk orders draw on shelf trims

Where fabric and trims stock stops

Stock records show what was received and issued. They do not buy anything, pay a supplier or value the shelves for the books. Purchasing stays with the owner, and the value of stock is a matter for the accountant. A count is only as good as the person counting. A shop with one cupboard of notions can keep a tick list instead.

FAQ

Frequently asked questions

How is a shortfall in customer cloth settled?

The length received is logged at the counter, and the length cut is noted against the order. If a garment needs more cloth than was brought, the gap is plain before cutting starts. The customer can then decide.

Which shelf items can be given a reorder level?

Any counted item can carry one, though levels belong on the ones that run out first, such as lining in popular shades and zips. Slow items can go without. Each level is set from the shop’s own experience.

Does the stock count change when trims are issued?

Each issue to an order lowers the shelf count by the amount taken. A recount corrects any drift, since counts are only as good as the last one. The shop decides who may enter that correction. The entry stays visible on the list afterwards.

How are buttons counted if they are bought loose?

Loose buttons are counted by set or by a unit the shop chooses, and entered once per type. Counting units are agreed during set-up. A bag of one style becomes a single line on the list.

Can leftover cloth be returned with a record?

The leftover length is noted against the order after cutting. At delivery the customer sees what was used and what is handed back. The note stays on the order afterwards. It is short.

Where it fits

How this feature fits the system.

Tailoring Shop Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Orders and delivery dates

Each garment is booked with its style notes, fabric source and promised day, and the counter sees how many pieces are already due on that day.

Order Management

Trial fittings

Trial slots are held against the cutter and the order, so a customer arrives for a fitting when the garment is basted and ready to try.

Appointment Scheduling

Cutting and stitching board

Every open garment sits on the board by stage with its tailor and days left, from cut and tagged through stitching to pressing.

Work Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements