Skip to main content
GullySystem

Trial fitting bookings for tailoring shops

Trial fittings book each slot against the master cutter and the order. They then record what must change on the garment, such as a lowered armhole or a shortened hem. The customer arrives when the piece is basted and ready to try. Changes go back to the bench as a written list.

What a trial fitting record keeps

A trial is one visit with one purpose. The record holds the booking, the state of the garment on arrival and the list of changes asked for. Nothing depends on memory at the fitting room door.

Slot against cutter and order

Each slot is held for a named cutter and tied to one order. Double booking of the cutter’s time is avoided. That keeps the fitting corner calm. The slot is meant for a garment that is basted and ready to try.

Changes asked for at the trial

The cutter writes what must change, such as a lowered armhole, a shortened hem or a taken-in waist. Each change is a line on the order. The list travels with the garment back to the bench.

Result of the fitting

After the trial, the record notes whether the garment fits as it stands or goes back for correction. A second trial can be booked from the same screen. Both visits stay on the order in sequence.

Whether the customer came

Arrival is marked against the slot. A customer who stays away leaves the garment waiting on the board. Staff at the counter see it and can offer another time without delay.

A trial fitting through the working week

Trials gather around the cutter’s timetable and the promised dates on the order book. A shop with a fitting corner feels the pattern every day. Four moments show how a booking turns into a changed garment. Each is brief. Each is also small enough to repeat all day.

Booking a slot at the counter

While taking the order, counter staff choose a trial slot from the cutter’s free times. It lands on the order beside the promised date. The customer leaves with both dates on the slip. Nothing is told by word of mouth.

Morning list of trials

At the start of the day, the master cutter opens the trials booked today, in slot order. Garments are pulled from the rail and set ready. A piece not yet basted is spotted early. The counter can warn the customer.

At the mirror

The cutter pins the jacket on the customer and calls the changes aloud. Lower the armhole, shorten the sleeve. Each one is typed as a line on the order before the customer leaves the mirror.

Back to the bench

A tailor picks the garment up from the board and reads the list of changes on a phone. The pieces are corrected line by line. Marking the correction done returns the garment to the finishing stage.

Who uses trial fittings and what each sees

Four roles touch a trial, and each sees a different part of it. One person writes, one books, one corrects and one reads. Rules for who may edit are agreed during set-up. Keep them simple.

Owners reading trials and delays

Owners see the trials booked today and the garments that arrived late for correction. A run of missed slots is visible. The view shows where promised dates are at risk, without a walk to the fitting corner.

Counter staff booking and rebooking

Counter staff book the slot, greet the customer and rebook a second trial when the cutter asks. They see the cutter’s free times. Notes on changes are the cutter’s, so staff read them without editing.

Master cutters recording changes

Master cutters hold the slots and write the changes asked for. A line can be added or crossed out until the customer agrees. The list is final once the customer leaves. It goes to the bench.

Tailors and finishers correcting pieces

Tailors and finishers see the changes list on the garment assigned to them and mark each correction done. Their phone shows only their own pieces. A cleared list returns the garment to the board, ready for finishing and the ready rail.

Decisions to settle before trials go live

This feature sits between the cutter’s eye and the tailor’s hands, so the rules around it need to be clear. Bring the cutter and the counter together before set-up.

Who may edit the changes list

Decide whether only the master cutter may write and edit the changes asked for, or whether a second cutter may too. A list rewritten by several hands cannot be trusted. One writer is the simplest rule.

What the list leaves out for trial fittings

Keep each change to a line the tailor can act on. Leave out opinions on taste and long stories about the customer. A short list is read at the machine. Common changes can be offered as choices.

How booked trials come across

Open orders with a trial date already fixed are entered before opening day, each with its slot and its cutter. They check them against the diary. Past trials stay in the diary and are not copied.

Which report to read first for trial fittings

Garments late against the promised date, by stage, shows whether trials are slowing delivery. Read it before any other. A day with too heavy a trial load for one cutter becomes visible there too, so slots can be spread.

How trial fittings link to the shop

Think of a trial as a hinge between cutting and finishing. It takes a garment from the board, a time from the cutter and a date from the order. It gives corrections back to the board. Five links carry that work along, and each one saves a call across the shop.

  • Orders and delivery dates carry the trial date and slot
  • Customer measurements are checked against the garment on trial
  • Cutting and stitching board receives the corrections list
  • Ready and trial messages remind the customer of the slot
  • Alterations take over once the garment is delivered

Where trial fittings stop

Trial fittings book time and keep the list of changes. They do not judge fit, and they cannot tell the cutter what to alter. That eye belongs to the master cutter. They do not photograph the garment or keep a video. A tailor with a single fitting corner and a handful of customers can run trials from a diary.

FAQ

Frequently asked questions

Does the customer get a reminder for the trial slot?

A text or mail goes out for the trial slot once it is booked. The message follows the order’s status. The channel and the wording are set during implementation, and the counter does not type each one.

Can a second trial be booked after changes?

A second slot can be booked from the first trial’s record, against the same cutter or another. Both visits stay on the order. The promised date remains in view, so the counter can judge whether delivery is still safe.

What happens if a customer misses the slot?

The slot shows as not attended and the garment stays on the board. Another time is offered and the trial is moved. Nothing else on the order changes. The promised date moves only if the shop decides.

Where are the changes asked for written down?

They are lines on the order itself, written by the cutter at the trial. The tailor reads the same lines on a phone. No paper slip in a pocket is needed. Nothing can be lost.

Can two cutters share trial slots?

Slots are held against a named cutter, so each has a separate timetable. Counter staff see both when booking. Pick the one who knows the garment. Which cutter takes which garment is the shop’s own rule.

Where it fits

How this feature fits the system.

Tailoring Shop Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Orders and delivery dates

Each garment is booked with its style notes, fabric source and promised day, and the counter sees how many pieces are already due on that day.

Order Management

Trial fittings

Trial slots are held against the cutter and the order, so a customer arrives for a fitting when the garment is basted and ready to try.

Appointment Scheduling

Cutting and stitching board

Every open garment sits on the board by stage with its tailor and days left, from cut and tagged through stitching to pressing.

Work Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements