Skip to main content
GullySystem
Manufacturing

Bill of Materials for Animal feed manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

A formula lists each ingredient with its inclusion rate for broiler starter, layer mash or cattle pellet. Substitutes are named against each line. Cost per tonne is read from current purchase prices.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Animal feed manufacturers

How the business operates.

Feed is made to a formula for a species and a growth stage, such as broiler starter, layer mash, dairy cattle pellet or fish grower. A formula can only perform as well as the grain and meal that go into the mixer. Maize moisture, soya protein and fish meal quality shift from one truck to the next, so the mill adjusts the mix each time. The record must follow.

Raw material intake and lab tests

Weigh each truck, record moisture, protein and foreign matter against the supplier lot, and accept, adjust the price or reject before the load reaches a bin.

Formula and premix management

Hold formulas by species and stage, with ingredient shares, premix additions and revision history. Each batch locks to the formula revision it used.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Weighbridge and raw material intake. Weigh each truck, record the supplier, vehicle and declared quantity, and hold the load until the lab result is entered against that lot.
  • Laboratory results. Save moisture, crude protein, fibre, aflatoxin screening and foreign matter results for every lot, with accept, reprice and reject decisions kept beside them.
  • Bins, silos and ingredient stock. Track the level in each bin or silo by ingredient and supplier lot, with transfers between bins and alerts when a bin falls below the day’s need.
  • Formulas and premix. Maintain formulas by species and stage, such as broiler starter, layer mash or dairy pellet, with revisions, premix inclusion and approved substitutions.

Operational bottlenecks to check

Intake results are not attached to bins

A load fails on moisture, yet the same maize is already in a bin with earlier stock. The lab report sits in a file, and the batch that used it cannot be named.

Formulas drift on the shop floor

Operators substitute an ingredient when a bin runs low, and the change is made verbally. The bag says one thing and the mixer log says another. Nobody knows who changed it.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Intake and lab

    A truck is weighed in, sampled and tested for moisture, protein and foreign matter. The load is accepted, repriced or rejected before it is tipped into a bin. Nothing enters a bin unchecked.

  2. 2. Formula and plan

    The planner picks formulas by species and stage against dealer orders. The plan shows the ingredient quantities needed and the bins that must supply them. Plans follow orders.

  3. 3. Mixing

    Operators weigh ingredients and premix into the mixer, with each weight confirmed on screen. A variance against the formula must be explained before the batch closes. Variances need a reason.

  4. 4. Pelleting and cooling

    Mash is conditioned, pressed through a die, cooled and screened. The run notes the die, steam and cooler settings, and the quantity of fines returned. Fines go back in.

  5. 5. Bagging and testing

    Bags are filled to weight, sealed and stamped with the batch code. A retained sample is shelved, and finished feed test results are saved to the batch. Each batch keeps one sample.

  6. 6. Dispatch and credit

    Dealer orders are loaded from stacks against the batch codes, invoiced, and set against the dealer’s credit limit. Returned bags are logged with the reason. Credit is checked first.

Industry reports to connect with

  • Raw material lots accepted, repriced and rejected, by supplier
  • Ingredient cost per tonne of finished feed, by formula
  • Formula variances flagged at the mixer, with reasons
  • Pellet runs with settings and fines returned

Questions before implementation.

When should animal feed manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements