Skip to main content
GullySystem
Manufacturing

Quality Control for Animal feed manufacturers

Record specified inspections and the disposition of checked goods.

Manufacturing

Does this function belong in your operation?

Use when goods or production stages require documented checks before release.

Material or output reaches an agreed inspection stage.

Every premix lot and every finished feed run is tested for protein, fat, fibre and ash against the formula’s target. Results sit beside the batch they describe. Failed lots are held, and a retained sample bag is shelved with the lot number.

Bring the records the workflow depends on.

  • Inspection specifications
  • Sampling and acceptance rules
  • Authorised reviewers

Outputs to check

  • Inspection readings and evidence
  • Hold, release or rejection record
  • Nonconformance follow-up list

Follow the quality control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Select the inspection

    Identify the receipt, job or output and applicable specification.

  2. 2. Record measurements

    Capture required readings, sample details and evidence.

  3. 3. Review nonconformance

    Hold failures and assign the authorised disposition.

  4. 4. Release or reject

    Record the responsible decision and affected quantity.

  5. 5. Follow rework

    Link corrective work and reinspection without overwriting the original results.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Quality checker

Fills the check at the station and holds what fails. Simple.

Production in-charge

Sees rejection by stage and by operator, and knows which machine is drifting before the customer says so.

Purchase

Takes the gate rejections to the supplier with dates and readings attached.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Reading outside tolerance

Hold the affected quantity and route the disposition to the authorised reviewer.

Inspection incomplete

Keep release pending and show the missing measurement or evidence.

Reworked goods returned

Create a linked reinspection rather than replacing the original failure record.

Can this work independently?

Quality records can be maintained independently against identifiable receipts or jobs. Inventory and production connections must enforce any hold or release decision. The module records authorised checks; it does not select a regulatory standard or replace a qualified inspector's judgement.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Purchase returns: Approved supplier-return quantities and adjustment references.
  • Batch and serial tracking: Lot or unit identifiers carried through stock movements.

Configure, test and introduce the workflow.

  • Show us where checks happen now. A note names the checkpoints and the parameters to record.
  • Provide limits and your list of rejection reasons. A test lot can then be checked on the trial screen. Checkers use it at a station for a trial run. Their remarks return as changes.
  • Checkers, production and purchase each practise their part. Each group gets a printed card. Other stations join as the trial station settles. The team reviews rejection reasons together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Failed items follow the agreed hold rule.
  • Results retain the specification version.
  • Release decisions identify the reviewer.
Animal feed manufacturers

How the business operates.

Feed is made to a formula for a species and a growth stage, such as broiler starter, layer mash, dairy cattle pellet or fish grower. A formula can only perform as well as the grain and meal that go into the mixer. Maize moisture, soya protein and fish meal quality shift from one truck to the next, so the mill adjusts the mix each time. The record must follow.

Raw material intake and lab tests

Weigh each truck, record moisture, protein and foreign matter against the supplier lot, and accept, adjust the price or reject before the load reaches a bin.

Formula and premix management

Hold formulas by species and stage, with ingredient shares, premix additions and revision history. Each batch locks to the formula revision it used.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Weighbridge and raw material intake. Weigh each truck, record the supplier, vehicle and declared quantity, and hold the load until the lab result is entered against that lot.
  • Laboratory results. Save moisture, crude protein, fibre, aflatoxin screening and foreign matter results for every lot, with accept, reprice and reject decisions kept beside them.
  • Bins, silos and ingredient stock. Track the level in each bin or silo by ingredient and supplier lot, with transfers between bins and alerts when a bin falls below the day’s need.
  • Formulas and premix. Maintain formulas by species and stage, such as broiler starter, layer mash or dairy pellet, with revisions, premix inclusion and approved substitutions.

Operational bottlenecks to check

Intake results are not attached to bins

A load fails on moisture, yet the same maize is already in a bin with earlier stock. The lab report sits in a file, and the batch that used it cannot be named.

Formulas drift on the shop floor

Operators substitute an ingredient when a bin runs low, and the change is made verbally. The bag says one thing and the mixer log says another. Nobody knows who changed it.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Intake and lab

    A truck is weighed in, sampled and tested for moisture, protein and foreign matter. The load is accepted, repriced or rejected before it is tipped into a bin. Nothing enters a bin unchecked.

  2. 2. Formula and plan

    The planner picks formulas by species and stage against dealer orders. The plan shows the ingredient quantities needed and the bins that must supply them. Plans follow orders.

  3. 3. Mixing

    Operators weigh ingredients and premix into the mixer, with each weight confirmed on screen. A variance against the formula must be explained before the batch closes. Variances need a reason.

  4. 4. Pelleting and cooling

    Mash is conditioned, pressed through a die, cooled and screened. The run notes the die, steam and cooler settings, and the quantity of fines returned. Fines go back in.

  5. 5. Bagging and testing

    Bags are filled to weight, sealed and stamped with the batch code. A retained sample is shelved, and finished feed test results are saved to the batch. Each batch keeps one sample.

  6. 6. Dispatch and credit

    Dealer orders are loaded from stacks against the batch codes, invoiced, and set against the dealer’s credit limit. Returned bags are logged with the reason. Credit is checked first.

Industry reports to connect with

  • Raw material lots accepted, repriced and rejected, by supplier
  • Ingredient cost per tonne of finished feed, by formula
  • Formula variances flagged at the mixer, with reasons
  • Pellet runs with settings and fines returned

Questions before implementation.

When should animal feed manufacturers consider quality control?

Use when goods or production stages require documented checks before release. Material or output reaches an agreed inspection stage.

What should we bring to the requirements discussion?

Bring anonymised examples of Inspection specifications; Sampling and acceptance rules; Authorised reviewers. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record specified inspections and the disposition of checked goods. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The software records your inspection process and does not certify product safety or regulatory conformity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Failed items follow the agreed hold rule. Use this check when reviewing the first working version.

Talk to us

Discuss quality control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements