Skip to main content
GullySystem
Manufacturing

Quality Control for Investment casting companies

Record specified inspections and the disposition of checked goods.

Manufacturing

Does this function belong in your operation?

Use when goods or production stages require documented checks before release.

Material or output reaches an agreed inspection stage.

Inspectors record X-ray, dye penetrant and dimensional results for each lot, with the operator’s initials. Failures are tied to the die and shell batch. No certificate prints early.

Bring the records the workflow depends on.

  • Inspection specifications
  • Sampling and acceptance rules
  • Authorised reviewers

Outputs to check

  • Inspection readings and evidence
  • Hold, release or rejection record
  • Nonconformance follow-up list

Follow the quality control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Select the inspection

    Identify the receipt, job or output and applicable specification.

  2. 2. Record measurements

    Capture required readings, sample details and evidence.

  3. 3. Review nonconformance

    Hold failures and assign the authorised disposition.

  4. 4. Release or reject

    Record the responsible decision and affected quantity.

  5. 5. Follow rework

    Link corrective work and reinspection without overwriting the original results.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Quality checker

Fills the check at the station and holds what fails. Simple.

Production in-charge

Sees rejection by stage and by operator, and knows which machine is drifting before the customer says so.

Purchase

Takes the gate rejections to the supplier with dates and readings attached.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Reading outside tolerance

Hold the affected quantity and route the disposition to the authorised reviewer.

Inspection incomplete

Keep release pending and show the missing measurement or evidence.

Reworked goods returned

Create a linked reinspection rather than replacing the original failure record.

Can this work independently?

Quality records can be maintained independently against identifiable receipts or jobs. Inventory and production connections must enforce any hold or release decision. The module records authorised checks; it does not select a regulatory standard or replace a qualified inspector's judgement.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Purchase returns: Approved supplier-return quantities and adjustment references.
  • Batch and serial tracking: Lot or unit identifiers carried through stock movements.

Configure, test and introduce the workflow.

  • Show us where checks happen now. A note names the checkpoints and the parameters to record.
  • Provide limits and your list of rejection reasons. A test lot can then be checked on the trial screen. Checkers use it at a station for a trial run. Their remarks return as changes.
  • Checkers, production and purchase each practise their part. Each group gets a printed card. Other stations join as the trial station settles. The team reviews rejection reasons together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Failed items follow the agreed hold rule.
  • Results retain the specification version.
  • Release decisions identify the reviewer.
Investment casting companies

How the business operates.

An investment casting begins as wax. It is injected in a die, joined to a runner into a tree, dipped in slurry and stucco several times, dried, dewaxed and fired. Metal is poured into the hot shell, and the shell is knocked off the casting.

Wax die and pattern register

Keep each die with its part number, cavity count, shot count and repair history, so wear is known before a pattern goes wrong.

Tree assembly and wax stock

Record patterns injected, trimmed and assembled onto trees, with the number of parts per tree and wax rejects.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and part quotations. Price a casting from die amortisation, wax, shell, alloy weight, finishing hours and inspection, from your own rates, with each revision kept.
  • Wax die register. Hold every die with part number, cavities, shot count, repairs and rack position, and flag a die near its planned service.
  • Wax injection and pattern stock. Record shots, rejects and trimmed patterns, with wax batch and injection settings noted for each run.
  • Tree assembly. Build trees from patterns of a single order or of mixed orders, and give each tree a number that follows it through shell, pour and cut-off.

Operational bottlenecks to check

Wax dies are hard to account for

Dies are made for each part and sit on racks between orders for months, while the people who knew their history move on to other jobs. Their shot count, repairs and cavity wear are known to one person. Or to nobody.

Shell coats are logged on paper

The count of dips, the stucco grade and the drying time per coat decide whether a shell survives the pour. A missed coat shows up as a leak.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    A drawing and a quantity arrive. The estimator prices die cost, wax, shell, alloy, finishing and inspection, and each revision is kept.

  2. 2. Die and wax plan

    A new die is ordered or an existing one is booked. Wax injection quantities are planned to match tree and pour dates.

  3. 3. Tree and shell

    Patterns are assembled onto trees. Each tree is dipped and stuccoed through its coats, and dry times are logged.

  4. 4. Dewax, fire and pour

    Trees are dewaxed and fired. The melt is recorded with its heat number, and the pour is tied to each tree.

  5. 5. Cut-off and finishing

    Shells are knocked off and parts cut from the tree. Grinding, blasting, straightening and heat treatment are logged per part.

  6. 6. Inspection and dispatch

    Dimensional, penetrant and X-ray results are entered per lot. The report, packing list and invoice go out with the shipment.

Industry reports to connect with

  • Yield by part number from wax injected to castings accepted
  • Trees by stage: wax, shell, dewax, poured, cut off
  • Die shot count and next service date
  • Shell rejects and cracked shells by cause

Questions before implementation.

When should investment casting companies consider quality control?

Use when goods or production stages require documented checks before release. Material or output reaches an agreed inspection stage.

What should we bring to the requirements discussion?

Bring anonymised examples of Inspection specifications; Sampling and acceptance rules; Authorised reviewers. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record specified inspections and the disposition of checked goods. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The software records your inspection process and does not certify product safety or regulatory conformity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Failed items follow the agreed hold rule. Use this check when reviewing the first working version.

Talk to us

Discuss quality control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements