Skip to main content
GullySystem
Manufacturing

Business solutions for Machine tool manufacturers

Explore software for work such as “CNC lathes and turning centres”. Review each business function below, including when it fits and what to check before implementation.

Machine tool manufacturers

How the business operates.

A lathe or machining centre is a long chain of small tolerances. A bed is machined, guideways are ground or scraped, a spindle is fitted, and every step either keeps or loses accuracy.

Model and option quotations

Quote by bed length, table size, spindle and controller from your own model list, with each revision kept.

Casting, bed and guideway records

Receive castings by pattern and heat, and record bed machining, grinding and scraping against the serial.

Spindle, screw and controller records

Link the spindle cartridge, ball screws, linear guides, motors and controller to the machine they were fitted to.

Run-in and accuracy tests

Save spindle run-in logs and geometric and positioning results beside the serial, in the format your engineers set.

Installation and training

Book the commissioning engineer, record levelling and parameters changed on site, and note operator training given.

Spares and service by serial

Quote belts, bearings, screws and guides from the machine as installed, and log each service visit.

Foundation and site readiness

The floor load, foundation drawing, power supply and air line needed at the customer’s shop are recorded. The service lead checks readiness before dispatch. Gaps are chased with the buyer.

Demonstration and trial cuts

Demo machines and trial cuts on a customer’s sample part are logged with programme, tooling and measured results. Sales uses the sheet in the next quotation. Prospects see the cycle time.

Controller parameter backups

Machine parameters, PLC programme versions and controller licence keys are saved per serial. The service engineer restores a setting after a crash. Changes made after delivery are dated.

Dealer and distributor orders

Dealer orders are recorded with model, options, stock allocation and delivery slot. Sales sees which machines are unsold. Dealer commission is worked out on the delivered machine only.

The records that hold the operation together.

  • Enquiries and application capture. Log the parts to be machined, material, tolerance and batch size with each enquiry, and keep the part drawings sent by the buyer.
  • Quotations and option lists. Price machines from your tables for bed length, table size, spindle, turret or tool changer and controller, with every revision kept.
  • Drawing and bill of materials control for machine tools. Release machine drawings and parts lists with a revision letter, so assembly builds the version that was ordered.
  • Casting and bed machining. Receive castings by pattern and heat number and record stress relief, machining setups and fixtures for each bed.
  • Guideway grinding and scraping. Log ways ground and scraped, the checks made and the fitter responsible, against the serial.
  • Spindle, screw and guide records. Link spindle cartridges, ball screws, linear guides, motors and controllers to the machine by serial.
  • Assembly stages. Move each machine through machining, scraping, assembly, wiring and run-in, with each stage signed off.
  • Run-in and accuracy tests. Save spindle run-in logs and geometric and positioning results for each serial, in your engineers’ format.

Operational bottlenecks to check

Casting and bed history is lost

A bed is machined on a given date with a given fixture. An axis drifts later. The maker cannot trace what was done.

Spindle and screw serials are not tied to the machine

The supplier’s spindle cartridge number is on a delivery paper. The machine nameplate carries something else.

Run-in and test results are scattered

A spindle run-in log is kept by one fitter. Geometric and positioning results are saved by another. A buyer’s question reaches neither.

Options change the build late

A buyer adds a four-axis table or a tool changer after the order. The assembly bay learns too late.

Installation notes never return

The commissioning engineer adjusts levelling and parameters on site, yet the factory file still shows the test bay results recorded before the crate was closed.

Follow the work across teams.

This is a planning flow. Confirm the steps, owners and approval rules against your actual operation.

  1. 1. Enquiry and application

    The enquiry records parts, material, tolerance and batch. A model and options are shortlisted.

  2. 2. Quotation

    The machine, accessories, installation and training are priced from your tables. Revisions are kept.

  3. 3. Order and drawing release

    A confirmed order opens a serial. Drawings and parts lists are released with a revision letter.

  4. 4. Machining and assembly

    Castings are machined, ways are ground and scraped, and the spindle, screws and guides are fitted.

  5. 5. Run-in and accuracy test

    The spindle is run in and the machine is tested. Readings are saved against the serial.

  6. 6. Installation, training and spares

    The machine is crated, installed and handed over. Operators are trained, and spares orders open from the record.

Roles and responsibility boundaries.

For sales engineers

Capture the application, propose a model, price options and follow the quotation to an order.

For the design office

Release drawings for variants and see which orders wait for a drawing.

For machining and scraping fitters

See castings waiting, record setups and ways scraped, and pass the bed to assembly.

For test engineers

Save run-in and accuracy readings against the serial and print the report a buyer asks for.

For installation and service engineers

Open the machine, record site changes and training, and quote the right spare.

Reports your managers need.

  • Machines in build, by stage and model
  • Castings received and machined by pattern
  • Spindles and screws issued by serial
  • Accuracy tests done, passed and awaiting
  • Open, won and lost quotations, by machine type
  • Installations booked and completed
  • Spares quoted, by model and machine age

Connections to scope

  • Email
  • WhatsApp
  • SMS
  • Accounting export
  • Drawing file links

Confirm data access, record ownership and the exchange method for each connection. Inclusion here does not mean every connection is available in a standard package.

Setup decisions and adoption risks.

Use these requirements to plan phases, data migration and user training. Agree the release sequence after reviewing your current systems.

Models and options

Model list, bed lengths, spindle options and controllers are loaded the way your estimator prices.

Test formats

Run-in and accuracy test sheets follow the layouts your engineers use and your buyers expect.

Component records

Spindles, screws, guides and controllers carry the serial fields your suppliers provide.

Records migrated

Machines already sold, their parts lists and spares history are brought in from the files you hold now.

Messages and documents

Email sends quotations, test reports and training records, and WhatsApp or another messenger carries quick updates.

Hosted by GullySystem

Sales, assembly and service staff share one serial record on servers that GullySystem maintains.

Limitations to settle before implementation

  • A dealer that only resells imported machines should look at Heavy Equipment Dealer Management Software.
  • A job shop that only uses machines may prefer Manufacturing Production Management Software.

Modules to consider first.

These functions connect to the operating model above. Confirm each one against the work your business actually runs.

Choose the operation you want to improve.

Use these activities to explain your scope. Your business does not need every function in the directory.

  • CNC lathes and turning centres
  • Vertical machining centres
  • Horizontal machining centres
  • Surface and cylindrical grinding machines
  • Press brakes and shearing machines
  • Dealer network in industrial towns
  • Demo room and trial cuts on customer parts
  • Spares and service engineer coverage
  • Bank and NBFC finance for buyers
Talk to us

Start with the problem your team can describe.

Bring a sample record and show where information is copied, missed or waiting for approval. Scope the first useful change from there.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements