Skip to main content
GullySystem
Manufacturing

Quality Control for PCB assembly companies

Record specified inspections and the disposition of checked goods.

Manufacturing

Does this function belong in your operation?

Use when goods or production stages require documented checks before release.

Material or output reaches an agreed inspection stage.

Boards pass automated optical inspection, then in-circuit test and, for some, a functional test. Every defect is recorded with its location and type, such as a tombstone or a solder bridge. The list feeds rework.

Bring the records the workflow depends on.

  • Inspection specifications
  • Sampling and acceptance rules
  • Authorised reviewers

Outputs to check

  • Inspection readings and evidence
  • Hold, release or rejection record
  • Nonconformance follow-up list

Follow the quality control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Select the inspection

    Identify the receipt, job or output and applicable specification.

  2. 2. Record measurements

    Capture required readings, sample details and evidence.

  3. 3. Review nonconformance

    Hold failures and assign the authorised disposition.

  4. 4. Release or reject

    Record the responsible decision and affected quantity.

  5. 5. Follow rework

    Link corrective work and reinspection without overwriting the original results.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Quality checker

Fills the check at the station and holds what fails. Simple.

Production in-charge

Sees rejection by stage and by operator, and knows which machine is drifting before the customer says so.

Purchase

Takes the gate rejections to the supplier with dates and readings attached.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Reading outside tolerance

Hold the affected quantity and route the disposition to the authorised reviewer.

Inspection incomplete

Keep release pending and show the missing measurement or evidence.

Reworked goods returned

Create a linked reinspection rather than replacing the original failure record.

Can this work independently?

Quality records can be maintained independently against identifiable receipts or jobs. Inventory and production connections must enforce any hold or release decision. The module records authorised checks; it does not select a regulatory standard or replace a qualified inspector's judgement.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Purchase returns: Approved supplier-return quantities and adjustment references.
  • Batch and serial tracking: Lot or unit identifiers carried through stock movements.

Configure, test and introduce the workflow.

  • Show us where checks happen now. A note names the checkpoints and the parameters to record.
  • Provide limits and your list of rejection reasons. A test lot can then be checked on the trial screen. Checkers use it at a station for a trial run. Their remarks return as changes.
  • Checkers, production and purchase each practise their part. Each group gets a printed card. Other stations join as the trial station settles. The team reviews rejection reasons together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Failed items follow the agreed hold rule.
  • Results retain the specification version.
  • Release decisions identify the reviewer.
PCB assembly companies

How the business operates.

An assembly job is won or lost on small things. A reel with the wrong resistor value. Solder paste past its jar life. A moisture-sensitive BGA left out of the bake cycle. Each one is cheap to prevent and costly once boards are reflowed, tested and packed for a customer who expects them on Friday.

Bill of materials with approved alternates

Hold the customer’s list with reference designators, approved alternate parts and quantity per board, and flag substitutions that were not approved.

Reel and component lot register

Record the supplier, lot and date code of each reel received, and link the reel to the assembly lot that used it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and quotations. Price an assembly from bill of materials cost, stencil, feeder setup, line time, test and assumed first-pass yield, and keep every revision of the quote for the next repeat order.
  • Board BOMs and alternate parts. Hold reference designators, quantity per board, approved alternates and revision letter, and flag a substitution that the customer has not approved before the kit is pulled.
  • Component purchase and receipt. Raise orders for shortages, record reels received with supplier lot, date code and moisture class, and send sensitive parts to the bake oven before they reach a shelf.
  • Reel and lot traceability. Link each reel to the assembly lot that consumed it, so a field return leads to the exact supplier lots and date codes on that board.

Operational bottlenecks to check

Reels are not tied to the boards

A reel of 10 kilo-ohm resistors is loaded on feeder 14 with no lot number noted. When a board comes back dead from a customer, the paper trail stops at the feeder bank.

Paste and stencils are managed by feel

Solder paste has a shelf life and an open-jar life, and every stencil has a print count, yet neither is logged against the lot that used it. Squeegee wear goes unseen.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    The customer’s bill of materials is loaded and priced with component cost, stencil, line time and test. Alternates are flagged for the customer’s approval before the quote goes out.

  2. 2. Purchase and receipt

    Missing parts are ordered. Reels are received with supplier lot, date code and moisture sensitivity level, and sensitive devices go to the bake queue before they reach a shelf or a feeder.

  3. 3. Kitting

    A job kit is counted against the bill of materials, line by line, and shortages are listed by reference designator. The job is released only when the kit is complete or the customer approves it short.

  4. 4. Print, place and reflow

    The stencil, paste jar, feeder setup, placement program and reflow profile are recorded for the lot. Boards pass solder paste inspection before placement. Automated optical inspection checks them again after the oven.

  5. 5. Through-hole, test and rework

    Hand-inserted and wave-soldered parts are logged against the lot. In-circuit and functional tests record results by board serial, and failures go to the rework bench with a record of the fault.

  6. 6. Pack and deliver

    Shipping paperwork states boards built, scrapped and shipped, and names the reel lots consumed. The certificate of conformance is printed from the same lot. Nothing is retyped.

Industry reports to connect with

  • Kits short, by job and part
  • First-pass yield by board type and line
  • Reels consumed by assembly lot
  • Paste jars and stencils nearing limits

Questions before implementation.

When should pcb assembly companies consider quality control?

Use when goods or production stages require documented checks before release. Material or output reaches an agreed inspection stage.

What should we bring to the requirements discussion?

Bring anonymised examples of Inspection specifications; Sampling and acceptance rules; Authorised reviewers. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record specified inspections and the disposition of checked goods. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The software records your inspection process and does not certify product safety or regulatory conformity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Failed items follow the agreed hold rule. Use this check when reviewing the first working version.

Talk to us

Discuss quality control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements