Skip to main content
GullySystem
Manufacturing

Warehouse Management for PCB assembly companies

Track physical stock by warehouse location and movement.

Inventory Management

Does this function belong in your operation?

Use when stock must be located and moved across warehouses, bins or sites.

Goods enter, leave or move within storage locations.

Dry cabinets hold reels and trays. Moisture sensitive parts sit in the cabinet with their exposure time noted. Pickers bring reels to the kitting tray in job order.

Bring the records the workflow depends on.

  • Warehouse and bin structure
  • Item handling rules
  • Opening stock by location

Outputs to check

  • Location-level stock record
  • Picking and transfer documents
  • Count and in-transit exception list

Follow the warehouse management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Receive the instruction

    Identify the expected receipt, pick or transfer.

  2. 2. Locate the goods

    Use the agreed storage location and item-handling rules.

  3. 3. Record the movement

    Capture actual quantities and any shortage or hold.

  4. 4. Confirm handover

    Obtain the required dispatch or receiving acknowledgement.

  5. 5. Reconcile the location

    Count and investigate differences while preserving in-transit stock.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Warehouse in-charge

Controls receipts, issues and counts for assigned storage locations and investigates physical differences.

Despatch clerk

Picks from the nearest location that actually has the goods, and prints the delivery note.

Owner

Sees stock spread across locations, and the material that has sat in the far warehouse since March. Slow movers are easy to spot.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Wrong bin recorded

Correct the location through a traceable movement rather than editing totals silently.

Pick shortage

Record the actual quantity and return the remaining requirement for replanning.

Transfer not received

Keep it in transit and investigate with the sending and receiving custodians.

Can this work independently?

Warehouse control needs item definitions, opening quantities and location rules. Goods receipt, sales dispatch and transfers supply movement references. It can run independently through entered instructions, but accounting value and customer invoicing remain outside physical warehouse execution.

Systems and records it connects with

  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.
  • Transport documents: Consignment details and authorised movement-document references.

Configure, test and introduce the workflow.

  • We walk through each location and its layout. You supply stock lists, and a location plan returns.
  • Sites, racks and sections are named. Staff check the names against signage. Balances are loaded per location. Counts confirm the load before use.
  • Transfer notes and pick lists are tested across nearby sites. Loaders say what to change. Each storekeeper is given a location of their own. Live movement begins on an agreed day.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Transfers reduce and increase the correct locations.
  • In-transit stock remains identifiable.
  • Counts reconcile with approved adjustments.
PCB assembly companies

How the business operates.

An assembly job is won or lost on small things. A reel with the wrong resistor value. Solder paste past its jar life. A moisture-sensitive BGA left out of the bake cycle. Each one is cheap to prevent and costly once boards are reflowed, tested and packed for a customer who expects them on Friday.

Bill of materials with approved alternates

Hold the customer’s list with reference designators, approved alternate parts and quantity per board, and flag substitutions that were not approved.

Reel and component lot register

Record the supplier, lot and date code of each reel received, and link the reel to the assembly lot that used it.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and quotations. Price an assembly from bill of materials cost, stencil, feeder setup, line time, test and assumed first-pass yield, and keep every revision of the quote for the next repeat order.
  • Board BOMs and alternate parts. Hold reference designators, quantity per board, approved alternates and revision letter, and flag a substitution that the customer has not approved before the kit is pulled.
  • Component purchase and receipt. Raise orders for shortages, record reels received with supplier lot, date code and moisture class, and send sensitive parts to the bake oven before they reach a shelf.
  • Reel and lot traceability. Link each reel to the assembly lot that consumed it, so a field return leads to the exact supplier lots and date codes on that board.

Operational bottlenecks to check

Reels are not tied to the boards

A reel of 10 kilo-ohm resistors is loaded on feeder 14 with no lot number noted. When a board comes back dead from a customer, the paper trail stops at the feeder bank.

Paste and stencils are managed by feel

Solder paste has a shelf life and an open-jar life, and every stencil has a print count, yet neither is logged against the lot that used it. Squeegee wear goes unseen.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    The customer’s bill of materials is loaded and priced with component cost, stencil, line time and test. Alternates are flagged for the customer’s approval before the quote goes out.

  2. 2. Purchase and receipt

    Missing parts are ordered. Reels are received with supplier lot, date code and moisture sensitivity level, and sensitive devices go to the bake queue before they reach a shelf or a feeder.

  3. 3. Kitting

    A job kit is counted against the bill of materials, line by line, and shortages are listed by reference designator. The job is released only when the kit is complete or the customer approves it short.

  4. 4. Print, place and reflow

    The stencil, paste jar, feeder setup, placement program and reflow profile are recorded for the lot. Boards pass solder paste inspection before placement. Automated optical inspection checks them again after the oven.

  5. 5. Through-hole, test and rework

    Hand-inserted and wave-soldered parts are logged against the lot. In-circuit and functional tests record results by board serial, and failures go to the rework bench with a record of the fault.

  6. 6. Pack and deliver

    Shipping paperwork states boards built, scrapped and shipped, and names the reel lots consumed. The certificate of conformance is printed from the same lot. Nothing is retyped.

Industry reports to connect with

  • Kits short, by job and part
  • First-pass yield by board type and line
  • Reels consumed by assembly lot
  • Paste jars and stencils nearing limits

Questions before implementation.

When should pcb assembly companies consider warehouse management?

Use when stock must be located and moved across warehouses, bins or sites. Goods enter, leave or move within storage locations.

What should we bring to the requirements discussion?

Bring anonymised examples of Warehouse and bin structure; Item handling rules; Opening stock by location. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track physical stock by warehouse location and movement. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Warehouse software does not replace physical handling, storage-safety or product-care procedures.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Transfers reduce and increase the correct locations. Use this check when reviewing the first working version.

Talk to us

Discuss warehouse management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements