Bill of Materials for Plastic extrusion companies
Define the materials and quantities needed for a manufactured item.
Does this function belong in your operation?
Use when output quantities depend on a repeatable material or component list.
A product or production recipe is created or revised.
Each product lists the resin, stabiliser, pigment masterbatch and filler per metre. Planners total compound for an order. Changing the filler ratio updates the cost of every product using it.
Bring the records the workflow depends on.
- Finished-item codes
- Component quantities and units
- Revision and waste rules
Outputs to check
- Approved material and subassembly list
- Versioned material cost basis
- Quantity-exploded requirement sheet
Follow the bill of materials workflow.
Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.
Who uses the module, and who approves?
Keep responsibilities distinct even when one person holds more than one role.
Decide how exceptions are handled.
These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.
Can this work independently?
A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.
Systems and records it connects with
- Production planning: Demand, planned quantities and resource or material constraints.
- Work orders: Released production jobs, material issues and output records.
- Purchase orders: Authorised supplier commitments and open line balances.
- Stock: Item-location quantities and authorised stock movements.
Configure, test and introduce the workflow.
- You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
- You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
- The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.
Check the result before rollout.
Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.
- Component units are consistent.
- Production uses the approved version.
- Revisions preserve the earlier material definition.
How the business operates.
An extrusion line rarely stops. The die, haul-off and cutter are set once, and then metres pour through the sizing sleeve and spray tank for hours while nobody touches a dial. Thin walls pile up as scrap before anyone looks.
The records that hold the operation together.
- Extrusion quotations. Price pipe, profile or sheet from weight per metre, screw output, resin and masterbatch cost and cut-to-length sawing, and keep every revision beside the accepted figure.
- Section and die register. Hold each section’s wall, outside diameter, tolerance and die, with weight per metre and the cut lengths each buyer orders. A 32 mm conduit and a 110 mm drain pipe each keep their own sheet.
- Line run log. Record screw speed, barrel zone temperatures, melt pressure, haul-off speed and metres per run, then set kilograms per hour against the quoted rate.
- Compound recipes and stock. Store each blend of resin, stabiliser, filler and colour, receive lots with their test certificates, and draw them down against runs. Low stock is flagged per line.
Operational bottlenecks to check
Start-up scrap is never costed
Each colour change and die change burns compound before the first good metre leaves the saw. Purge, die-lip drool and trimmed ends go to the regrind bin unweighed. So the yield you quoted and the yield you achieved drift apart, and the loss slides quietly into the next job’s price.
Dimensions are measured and then lost
Wall thickness, outside diameter and ovality are read at the tank and noted on a clipboard, and the sheet is filed by date, not by order. When a buyer queries one bundle three weeks later, nobody can find the readings taken at that hour.
How work flows across this business
This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.
1. Enquiry and quotation
The enquiry names a pipe size and pressure class, a profile section or a sheet gauge, with the cut length and metres wanted. The quote uses weight per metre, line output and compound cost, and every revision is kept.
2. Die and trial
The die comes from the tool store or is made new. A start-up trial records zone temperatures, scrap and measured wall before the run is cleared for the buyer.
3. Line planning
The planner picks a line by size range and screw output, places colour changes so the lightest shade runs first, and checks resin, masterbatch and regrind for the whole run.
4. Running
The operator logs barrel temperatures, screw speed, haul-off speed and metres, with wall and diameter checks entered as the pipe leaves the sizing tank. Trim goes to the grinder.
5. Cutting and bundling
Lengths are cut at the planetary saw to order and counted into bundles. Tags print section, length, count and order number.
6. Dispatch
The delivery note lists bundles and metres, and the invoice follows from it. The die goes back to the tool store with its new metre count and a note on its condition.
Industry reports to connect with
- Line output in kilograms per hour against the quoted rate
- Scrap and purge by cause, line and colour
- Compound, masterbatch and regrind consumed per order
- Dies ranked by metres since polishing
Questions before implementation.
When should plastic extrusion companies consider bill of materials?
Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.
What should we bring to the requirements discussion?
Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.
Does this replace our existing business software?
The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.
What is outside this module?
Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.
How are scope, price and rollout decided?
The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.
Related functions for plastic extrusion companies.
Discuss bill of materials for your business.
Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements