Batch and Serial Tracking for Plastic extrusion companies
Trace goods using batch identifiers or individual serial numbers.
Does this function belong in your operation?
Use when physical goods require lot history, expiry control or individual identification.
Traceable goods are received, produced or moved.
A compound lot is followed from the hopper through the extruder to the bundle tag. A complaint about a cracked pipe length points to a resin lot and a shift. Mixed lots stay separate.
Bring the records the workflow depends on.
- Item tracking rules
- Batch or serial identifiers
- Movement and expiry records
Outputs to check
- Lot or unit movement history
- Trace-forward and trace-back report
- Held or expiring stock list
Follow the batch and serial tracking workflow.
Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.
Who uses the module, and who approves?
Keep responsibilities distinct even when one person holds more than one role.
Decide how exceptions are handled.
These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.
Can this work independently?
Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.
Systems and records it connects with
- Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
- Stock: Item-location quantities and authorised stock movements.
- Quality control: Inspection results and authorised hold or release decisions.
- Invoice management: Issued invoice references, line amounts and outstanding balances.
Configure, test and introduce the workflow.
- You tell us which items carry shelf life or serials. We write back how each will be numbered.
- The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
- Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.
Check the result before rollout.
Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.
- Tracked items cannot move without required identifiers.
- Serial references do not duplicate active units.
- A lot can be traced to its recorded recipients.
How the business operates.
An extrusion line rarely stops. The die, haul-off and cutter are set once, and then metres pour through the sizing sleeve and spray tank for hours while nobody touches a dial. Thin walls pile up as scrap before anyone looks.
The records that hold the operation together.
- Extrusion quotations. Price pipe, profile or sheet from weight per metre, screw output, resin and masterbatch cost and cut-to-length sawing, and keep every revision beside the accepted figure.
- Section and die register. Hold each section’s wall, outside diameter, tolerance and die, with weight per metre and the cut lengths each buyer orders. A 32 mm conduit and a 110 mm drain pipe each keep their own sheet.
- Line run log. Record screw speed, barrel zone temperatures, melt pressure, haul-off speed and metres per run, then set kilograms per hour against the quoted rate.
- Compound recipes and stock. Store each blend of resin, stabiliser, filler and colour, receive lots with their test certificates, and draw them down against runs. Low stock is flagged per line.
Operational bottlenecks to check
Start-up scrap is never costed
Each colour change and die change burns compound before the first good metre leaves the saw. Purge, die-lip drool and trimmed ends go to the regrind bin unweighed. So the yield you quoted and the yield you achieved drift apart, and the loss slides quietly into the next job’s price.
Dimensions are measured and then lost
Wall thickness, outside diameter and ovality are read at the tank and noted on a clipboard, and the sheet is filed by date, not by order. When a buyer queries one bundle three weeks later, nobody can find the readings taken at that hour.
How work flows across this business
This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.
1. Enquiry and quotation
The enquiry names a pipe size and pressure class, a profile section or a sheet gauge, with the cut length and metres wanted. The quote uses weight per metre, line output and compound cost, and every revision is kept.
2. Die and trial
The die comes from the tool store or is made new. A start-up trial records zone temperatures, scrap and measured wall before the run is cleared for the buyer.
3. Line planning
The planner picks a line by size range and screw output, places colour changes so the lightest shade runs first, and checks resin, masterbatch and regrind for the whole run.
4. Running
The operator logs barrel temperatures, screw speed, haul-off speed and metres, with wall and diameter checks entered as the pipe leaves the sizing tank. Trim goes to the grinder.
5. Cutting and bundling
Lengths are cut at the planetary saw to order and counted into bundles. Tags print section, length, count and order number.
6. Dispatch
The delivery note lists bundles and metres, and the invoice follows from it. The die goes back to the tool store with its new metre count and a note on its condition.
Industry reports to connect with
- Line output in kilograms per hour against the quoted rate
- Scrap and purge by cause, line and colour
- Compound, masterbatch and regrind consumed per order
- Dies ranked by metres since polishing
Questions before implementation.
When should plastic extrusion companies consider batch and serial tracking?
Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.
What should we bring to the requirements discussion?
Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.
Does this replace our existing business software?
The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.
What is outside this module?
Traceability does not replace product testing, recall decisions or regulatory obligations.
How are scope, price and rollout decided?
The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.
Related functions for plastic extrusion companies.
Discuss batch and serial tracking for your business.
Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.
What happens after you share your requirements
- We review your brief and the systems you already use.
- We clarify the workflow, missing information and the work to consider first.
- The proposed scope sets out the deliverables, responsibilities and dependencies.
- Review the scope and commercial terms before deciding whether to proceed.
Start with your requirements
Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.
Share your requirements