Skip to main content
GullySystem
Manufacturing

Warehouse Management for Plywood manufacturers

Track physical stock by warehouse location and movement.

Inventory Management

Does this function belong in your operation?

Use when stock must be located and moved across warehouses, bins or sites.

Goods enter, leave or move within storage locations.

Finished pallets are placed in bays by grade, thickness and dealer order. The loader picks a dealer’s order without opening other stacks. Counts are checked bay by bay.

Bring the records the workflow depends on.

  • Warehouse and bin structure
  • Item handling rules
  • Opening stock by location

Outputs to check

  • Location-level stock record
  • Picking and transfer documents
  • Count and in-transit exception list

Follow the warehouse management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Receive the instruction

    Identify the expected receipt, pick or transfer.

  2. 2. Locate the goods

    Use the agreed storage location and item-handling rules.

  3. 3. Record the movement

    Capture actual quantities and any shortage or hold.

  4. 4. Confirm handover

    Obtain the required dispatch or receiving acknowledgement.

  5. 5. Reconcile the location

    Count and investigate differences while preserving in-transit stock.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Warehouse in-charge

Controls receipts, issues and counts for assigned storage locations and investigates physical differences.

Despatch clerk

Picks from the nearest location that actually has the goods, and prints the delivery note.

Owner

Sees stock spread across locations, and the material that has sat in the far warehouse since March. Slow movers are easy to spot.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Wrong bin recorded

Correct the location through a traceable movement rather than editing totals silently.

Pick shortage

Record the actual quantity and return the remaining requirement for replanning.

Transfer not received

Keep it in transit and investigate with the sending and receiving custodians.

Can this work independently?

Warehouse control needs item definitions, opening quantities and location rules. Goods receipt, sales dispatch and transfers supply movement references. It can run independently through entered instructions, but accounting value and customer invoicing remain outside physical warehouse execution.

Systems and records it connects with

  • Stock tracking and alerts: Item-location quantities and authorised stock movements.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.
  • Transport documents: Consignment details and authorised movement-document references.

Configure, test and introduce the workflow.

  • We walk through each location and its layout. You supply stock lists, and a location plan returns.
  • Sites, racks and sections are named. Staff check the names against signage. Balances are loaded per location. Counts confirm the load before use.
  • Transfer notes and pick lists are tested across nearby sites. Loaders say what to change. Each storekeeper is given a location of their own. Live movement begins on an agreed day.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Transfers reduce and increase the correct locations.
  • In-transit stock remains identifiable.
  • Counts reconcile with approved adjustments.
Plywood manufacturers

How the business operates.

Plywood is made in stages that each lose some material. Logs are peeled, the veneer is clipped, dried and sorted, and layers are glued and pressed hot. A sheet that fails a bond test or comes out at the wrong thickness could trace back to any one of them. Without a record, the mill guesses.

Log intake and girth sorting

Record logs by species, supplier and girth class on receipt, with weight or volume, and issue them to the lathe by lot.

Peeling and veneer recovery

Log the ribbon output per lot, clipped veneer by thickness and the core and bark waste, so recovery per lot is known.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Log yard and intake. Receive logs by species, supplier, girth class and volume, assign lot numbers and track what is stacked, soaked and issued to the lathe.
  • Peeling and recovery. Record ribbon output by lot with clipped veneer by thickness, and show core and bark waste so recovery per lot is visible.
  • Dryer load register. Number each dryer load, record moisture on exit and the veneer by thickness that came out, and flag loads that need redrying.
  • Veneer grading. Count face, core and reject veneer by grade and thickness, and hold graded stock by shelf for layup.

Operational bottlenecks to check

Veneer recovery is a guess

Logs of different girth come from different suppliers and are peeled together. Each log lot yields an unknown area of dry veneer, so what you pay for logs is never set against what a sheet costs. Buying goes blind.

Dryer output is not graded in time

Veneer comes out wet in patches or with splits. Sorting happens late, and poor sheets are used as core because nobody recorded the dryer load that produced them. The next load repeats it.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Log intake

    Logs arrive by weight or volume with species, supplier and girth class. They are lotted in the yard and soaked or steamed ahead of peeling.

  2. 2. Peeling and clipping

    The lathe peels logs lot by lot into a ribbon, which is clipped to size. Output by thickness, core and bark waste are recorded against the lot.

  3. 3. Drying and grading

    Veneer goes through the dryer in numbered loads. Moisture on exit is noted, and sheets are graded as face, core or reject.

  4. 4. Glue and layup

    Glue is mixed by batch and spread. Layers are laid up in the order the sheet requires, with the batch and operator noted.

  5. 5. Pressing and finishing

    Layups are pressed cold and hot in logged loads, then trimmed, sanded and graded by class and thickness.

  6. 6. Testing and dispatch

    Bond samples are boiled or soaked and results are entered. Passing sheets are palletised, allocated to dealer orders and loaded with the invoice.

Industry reports to connect with

  • Recovery of dry veneer per log lot and species
  • Dryer loads by exit moisture and reject share
  • Glue batches against press loads and test results
  • Sheets by class and thickness per day

Questions before implementation.

When should plywood manufacturers consider warehouse management?

Use when stock must be located and moved across warehouses, bins or sites. Goods enter, leave or move within storage locations.

What should we bring to the requirements discussion?

Bring anonymised examples of Warehouse and bin structure; Item handling rules; Opening stock by location. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track physical stock by warehouse location and movement. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Warehouse software does not replace physical handling, storage-safety or product-care procedures.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Transfers reduce and increase the correct locations. Use this check when reviewing the first working version.

Talk to us

Discuss warehouse management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements