Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Rubber moulding companies

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Raw polymer, carbon black, curing agents, metal inserts and bonding agents carry reorder levels. Stores sees which ingredient is running low before the mixer is booked. Old stock is flagged by receipt date.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Rubber moulding companies

How the business operates.

A rubber moulding shop makes bushes, grommets, bellows, mounts and bonded rubber-to-metal parts. Raw rubber and fillers are mixed into compound on a mill or an internal mixer. Strips or preforms are cut to weight, loaded into a heated mould and cured under pressure. What decides quality is the mix that went in, the cavity that shaped it and how long it sat under heat and pressure.

Compound batches and test results

Record each mix with its recipe, rheometer curve, hardness and specific gravity, and mark the batch as released or held.

Mould and cavity register

Hold each mould with its cavity count, press fit, shot history, repairs and the date it was last cleaned.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and drawing quotations. Log each buyer drawing and price it from compound cost, preform weight, cure time and cavity count. Every revision of the quote is kept.
  • Compound recipes and batches. Hold recipes with polymer, carbon black, filler and curative shares. Record each mix with its rheometer curve, scorch time, hardness and release status.
  • Mould and cavity register. Track every mould with cavity count, press fit, shot count since cleaning and repair history. Plating, venting and dowel pin work is logged too.
  • Press cure settings. Store time, temperature and pressure for each mould and compound pair, then show them at the press, so the tag on the wall is no longer the record.

Operational bottlenecks to check

Compound batches and parts are separate worlds

The mixing room keeps batch sheets and the press operator keeps a shot count, so a rejected bag of bushes has no batch behind it.

Cure settings are chalked on the press

Time and temperature for each mould are written on a tag or in the operator’s head. A new operator runs a different cure and the parts come out under-cured or burnt.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and drawing

    The drawing arrives with a compound grade and a Shore A hardness range. The estimator quotes from compound cost, preform weight, cure time and cavity count.

  2. 2. Mould and sample

    The mould is made or drawn from the tool store. A first-off sample is moulded, measured against the drawing with a dial caliper and durometer, and sent to the buyer for approval.

  3. 3. Compound mixing

    The mixing room makes a batch on the two-roll mill or internal mixer, tests it on a rheometer and durometer, and releases or holds the compound for the presses.

  4. 4. Moulding

    Preforms are cut to weight and loaded into the cavities. The press runs at the recorded cure, and shots and rejects are logged against each cavity.

  5. 5. Trim, post-cure and inspection

    Flash is removed by trimming or cryogenic deflashing. Post-cure ovens run where the compound needs them, and inspectors check dimensions and surface faults such as flow marks and backrinding.

  6. 6. Bag and deliver

    Parts are counted into labelled bags. A delivery note and any requested certificate go out with them, and the invoice follows the order.

Industry reports to connect with

  • Orders by press with compound batch and cure
  • Batches released, held and rejected
  • Scrap by cause, mould and cavity
  • Shots since cleaning by mould

Questions before implementation.

When should rubber moulding companies consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements