Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Rubber moulding companies

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Every mixed compound batch gets a number that follows into the cured parts and the bags sent out. A buyer’s complaint about a swollen seal traces back to the mixing date. Affected lots are then easy to list.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Rubber moulding companies

How the business operates.

A rubber moulding shop makes bushes, grommets, bellows, mounts and bonded rubber-to-metal parts. Raw rubber and fillers are mixed into compound on a mill or an internal mixer. Strips or preforms are cut to weight, loaded into a heated mould and cured under pressure. What decides quality is the mix that went in, the cavity that shaped it and how long it sat under heat and pressure.

Compound batches and test results

Record each mix with its recipe, rheometer curve, hardness and specific gravity, and mark the batch as released or held.

Mould and cavity register

Hold each mould with its cavity count, press fit, shot history, repairs and the date it was last cleaned.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and drawing quotations. Log each buyer drawing and price it from compound cost, preform weight, cure time and cavity count. Every revision of the quote is kept.
  • Compound recipes and batches. Hold recipes with polymer, carbon black, filler and curative shares. Record each mix with its rheometer curve, scorch time, hardness and release status.
  • Mould and cavity register. Track every mould with cavity count, press fit, shot count since cleaning and repair history. Plating, venting and dowel pin work is logged too.
  • Press cure settings. Store time, temperature and pressure for each mould and compound pair, then show them at the press, so the tag on the wall is no longer the record.

Operational bottlenecks to check

Compound batches and parts are separate worlds

The mixing room keeps batch sheets and the press operator keeps a shot count, so a rejected bag of bushes has no batch behind it.

Cure settings are chalked on the press

Time and temperature for each mould are written on a tag or in the operator’s head. A new operator runs a different cure and the parts come out under-cured or burnt.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and drawing

    The drawing arrives with a compound grade and a Shore A hardness range. The estimator quotes from compound cost, preform weight, cure time and cavity count.

  2. 2. Mould and sample

    The mould is made or drawn from the tool store. A first-off sample is moulded, measured against the drawing with a dial caliper and durometer, and sent to the buyer for approval.

  3. 3. Compound mixing

    The mixing room makes a batch on the two-roll mill or internal mixer, tests it on a rheometer and durometer, and releases or holds the compound for the presses.

  4. 4. Moulding

    Preforms are cut to weight and loaded into the cavities. The press runs at the recorded cure, and shots and rejects are logged against each cavity.

  5. 5. Trim, post-cure and inspection

    Flash is removed by trimming or cryogenic deflashing. Post-cure ovens run where the compound needs them, and inspectors check dimensions and surface faults such as flow marks and backrinding.

  6. 6. Bag and deliver

    Parts are counted into labelled bags. A delivery note and any requested certificate go out with them, and the invoice follows the order.

Industry reports to connect with

  • Orders by press with compound batch and cure
  • Batches released, held and rejected
  • Scrap by cause, mould and cavity
  • Shots since cleaning by mould

Questions before implementation.

When should rubber moulding companies consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements