Skip to main content
GullySystem
Manufacturing

Bill of Materials for Valve manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

A 6-inch gate valve lists body, bonnet, wedge, stem, seat rings, gland packing and bolts with material grades. Revising the stem material updates open orders. The store issues the right trim set.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Valve manufacturers

How the business operates.

Valve makers machine castings or forgings, fit seats, stems and packing, and pressure test every unit before it ships to a refinery, a water works or a plant builder. Gate, globe, ball, butterfly and check valves each carry a separate parts list, and a stem for one size is useless on the next class up. A buyer expects the serial to answer which heat, which test and which trim, years after installation and after the original order clerk has left. That is the job.

Valve type and size register

Hold each valve by type, size, pressure class, end connection, body material and trim code, with the parts list that builds a gate, globe, ball or check pattern.

Casting and forging heats

Receive castings and forgings against the order with heat number, material report and foundry marking, and link each heat to every valve built from it, bonnet and body alike.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and specification capture. Log enquiries with size, class, end connection, body material and trim, and file the specification sheet with the quotation so changes read against the original ask.
  • Valve quotations. Price valves from castings, trim parts, boring and test hours, and keep each revision of the buyer’s request as its own version.
  • Valve model register. Hold gate, globe, ball and check models by size and pressure class, each with its body, bonnet, stem and seat list, so a new order copies the right structure.
  • Casting and forging receipt. Book each casting by heat number and mill test report against its purchase order, then tie it to the serials machined from it. A body without a heat is held.

Operational bottlenecks to check

Casting heat is lost after machining

The foundry sends a material report for each pour, but once bodies are machined and stacked the heat number survives only on a paper tag. Tags fall off.

Test results sit on the bench sheet

Shell and seat pressure, hold time and leakage are written on a log at the test bench, and a buyer who asks for the certificate waits while someone finds the sheet.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    A buyer lists size, pressure class, body material, end connection and trim, and the price is built from the parts list, boring hours and bench test hours. Revisions are kept.

  2. 2. Order and serials

    The order is released with a serial for each valve or lot and the parts list for its type, drawn from the model register at the moment of release. No two valves share a number.

  3. 3. Casting receipt

    Bodies, bonnets and forgings arrive against the purchase order, and the heat number and mill test report are booked and linked to serials before anything leaves the receiving bay. Nothing is binned unmarked.

  4. 4. Machining and assembly

    Bores, seat pockets and flange faces are machined and checked with plug gauges before stems, discs or balls, seats and gland packing are issued and fitted. Each issue lands on the serial.

  5. 5. Testing

    Each valve is tested at shell and seat pressure on the bench, with hold time and bubble count saved, and failures go to rework and are retested. Untested valves are held back from packing.

  6. 6. Nameplate, certificate and despatch

    Plates and certificates are printed from the serial record, and valves are packed in lots with a packing list that names every serial in the crate. Shipping marks follow the order.

Industry reports to connect with

  • Valves by stage and serial
  • Casting heats with valves built from each
  • Shell and seat hydrotest results by serial
  • Rework and retest count by leak cause

Questions before implementation.

When should valve manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements