Skip to main content
GullySystem
Manufacturing

Quality Control for Valve manufacturers

Record specified inspections and the disposition of checked goods.

Manufacturing

Does this function belong in your operation?

Use when goods or production stages require documented checks before release.

Material or output reaches an agreed inspection stage.

Incoming castings are checked for chemistry and surface, machined seats for finish, and finished valves for shell and seat pressure. Results are tied to the serial. A failed test stops the valve before painting.

Bring the records the workflow depends on.

  • Inspection specifications
  • Sampling and acceptance rules
  • Authorised reviewers

Outputs to check

  • Inspection readings and evidence
  • Hold, release or rejection record
  • Nonconformance follow-up list

Follow the quality control workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Select the inspection

    Identify the receipt, job or output and applicable specification.

  2. 2. Record measurements

    Capture required readings, sample details and evidence.

  3. 3. Review nonconformance

    Hold failures and assign the authorised disposition.

  4. 4. Release or reject

    Record the responsible decision and affected quantity.

  5. 5. Follow rework

    Link corrective work and reinspection without overwriting the original results.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Quality checker

Fills the check at the station and holds what fails. Simple.

Production in-charge

Sees rejection by stage and by operator, and knows which machine is drifting before the customer says so.

Purchase

Takes the gate rejections to the supplier with dates and readings attached.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Reading outside tolerance

Hold the affected quantity and route the disposition to the authorised reviewer.

Inspection incomplete

Keep release pending and show the missing measurement or evidence.

Reworked goods returned

Create a linked reinspection rather than replacing the original failure record.

Can this work independently?

Quality records can be maintained independently against identifiable receipts or jobs. Inventory and production connections must enforce any hold or release decision. The module records authorised checks; it does not select a regulatory standard or replace a qualified inspector's judgement.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Purchase returns: Approved supplier-return quantities and adjustment references.
  • Batch and serial tracking: Lot or unit identifiers carried through stock movements.

Configure, test and introduce the workflow.

  • Show us where checks happen now. A note names the checkpoints and the parameters to record.
  • Provide limits and your list of rejection reasons. A test lot can then be checked on the trial screen. Checkers use it at a station for a trial run. Their remarks return as changes.
  • Checkers, production and purchase each practise their part. Each group gets a printed card. Other stations join as the trial station settles. The team reviews rejection reasons together.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Failed items follow the agreed hold rule.
  • Results retain the specification version.
  • Release decisions identify the reviewer.
Valve manufacturers

How the business operates.

Valve makers machine castings or forgings, fit seats, stems and packing, and pressure test every unit before it ships to a refinery, a water works or a plant builder. Gate, globe, ball, butterfly and check valves each carry a separate parts list, and a stem for one size is useless on the next class up. A buyer expects the serial to answer which heat, which test and which trim, years after installation and after the original order clerk has left. That is the job.

Valve type and size register

Hold each valve by type, size, pressure class, end connection, body material and trim code, with the parts list that builds a gate, globe, ball or check pattern.

Casting and forging heats

Receive castings and forgings against the order with heat number, material report and foundry marking, and link each heat to every valve built from it, bonnet and body alike.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and specification capture. Log enquiries with size, class, end connection, body material and trim, and file the specification sheet with the quotation so changes read against the original ask.
  • Valve quotations. Price valves from castings, trim parts, boring and test hours, and keep each revision of the buyer’s request as its own version.
  • Valve model register. Hold gate, globe, ball and check models by size and pressure class, each with its body, bonnet, stem and seat list, so a new order copies the right structure.
  • Casting and forging receipt. Book each casting by heat number and mill test report against its purchase order, then tie it to the serials machined from it. A body without a heat is held.

Operational bottlenecks to check

Casting heat is lost after machining

The foundry sends a material report for each pour, but once bodies are machined and stacked the heat number survives only on a paper tag. Tags fall off.

Test results sit on the bench sheet

Shell and seat pressure, hold time and leakage are written on a log at the test bench, and a buyer who asks for the certificate waits while someone finds the sheet.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    A buyer lists size, pressure class, body material, end connection and trim, and the price is built from the parts list, boring hours and bench test hours. Revisions are kept.

  2. 2. Order and serials

    The order is released with a serial for each valve or lot and the parts list for its type, drawn from the model register at the moment of release. No two valves share a number.

  3. 3. Casting receipt

    Bodies, bonnets and forgings arrive against the purchase order, and the heat number and mill test report are booked and linked to serials before anything leaves the receiving bay. Nothing is binned unmarked.

  4. 4. Machining and assembly

    Bores, seat pockets and flange faces are machined and checked with plug gauges before stems, discs or balls, seats and gland packing are issued and fitted. Each issue lands on the serial.

  5. 5. Testing

    Each valve is tested at shell and seat pressure on the bench, with hold time and bubble count saved, and failures go to rework and are retested. Untested valves are held back from packing.

  6. 6. Nameplate, certificate and despatch

    Plates and certificates are printed from the serial record, and valves are packed in lots with a packing list that names every serial in the crate. Shipping marks follow the order.

Industry reports to connect with

  • Valves by stage and serial
  • Casting heats with valves built from each
  • Shell and seat hydrotest results by serial
  • Rework and retest count by leak cause

Questions before implementation.

When should valve manufacturers consider quality control?

Use when goods or production stages require documented checks before release. Material or output reaches an agreed inspection stage.

What should we bring to the requirements discussion?

Bring anonymised examples of Inspection specifications; Sampling and acceptance rules; Authorised reviewers. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record specified inspections and the disposition of checked goods. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

The software records your inspection process and does not certify product safety or regulatory conformity.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Failed items follow the agreed hold rule. Use this check when reviewing the first working version.

Talk to us

Discuss quality control for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements