Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Valve manufacturers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Every valve carries a serial that leads to its casting heat, test record and nameplate. One serial gives one answer. A suspect heat is traced to the valves made from it.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Valve manufacturers

How the business operates.

Valve makers machine castings or forgings, fit seats, stems and packing, and pressure test every unit before it ships to a refinery, a water works or a plant builder. Gate, globe, ball, butterfly and check valves each carry a separate parts list, and a stem for one size is useless on the next class up. A buyer expects the serial to answer which heat, which test and which trim, years after installation and after the original order clerk has left. That is the job.

Valve type and size register

Hold each valve by type, size, pressure class, end connection, body material and trim code, with the parts list that builds a gate, globe, ball or check pattern.

Casting and forging heats

Receive castings and forgings against the order with heat number, material report and foundry marking, and link each heat to every valve built from it, bonnet and body alike.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Enquiries and specification capture. Log enquiries with size, class, end connection, body material and trim, and file the specification sheet with the quotation so changes read against the original ask.
  • Valve quotations. Price valves from castings, trim parts, boring and test hours, and keep each revision of the buyer’s request as its own version.
  • Valve model register. Hold gate, globe, ball and check models by size and pressure class, each with its body, bonnet, stem and seat list, so a new order copies the right structure.
  • Casting and forging receipt. Book each casting by heat number and mill test report against its purchase order, then tie it to the serials machined from it. A body without a heat is held.

Operational bottlenecks to check

Casting heat is lost after machining

The foundry sends a material report for each pour, but once bodies are machined and stacked the heat number survives only on a paper tag. Tags fall off.

Test results sit on the bench sheet

Shell and seat pressure, hold time and leakage are written on a log at the test bench, and a buyer who asks for the certificate waits while someone finds the sheet.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Enquiry and quotation

    A buyer lists size, pressure class, body material, end connection and trim, and the price is built from the parts list, boring hours and bench test hours. Revisions are kept.

  2. 2. Order and serials

    The order is released with a serial for each valve or lot and the parts list for its type, drawn from the model register at the moment of release. No two valves share a number.

  3. 3. Casting receipt

    Bodies, bonnets and forgings arrive against the purchase order, and the heat number and mill test report are booked and linked to serials before anything leaves the receiving bay. Nothing is binned unmarked.

  4. 4. Machining and assembly

    Bores, seat pockets and flange faces are machined and checked with plug gauges before stems, discs or balls, seats and gland packing are issued and fitted. Each issue lands on the serial.

  5. 5. Testing

    Each valve is tested at shell and seat pressure on the bench, with hold time and bubble count saved, and failures go to rework and are retested. Untested valves are held back from packing.

  6. 6. Nameplate, certificate and despatch

    Plates and certificates are printed from the serial record, and valves are packed in lots with a packing list that names every serial in the crate. Shipping marks follow the order.

Industry reports to connect with

  • Valves by stage and serial
  • Casting heats with valves built from each
  • Shell and seat hydrotest results by serial
  • Rework and retest count by leak cause

Questions before implementation.

When should valve manufacturers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements