Skip to main content
GullySystem
Manufacturing

Stock Tracking and Alerts for Wiring harness manufacturers

Record stock movements and flag items reaching configured levels.

Inventory Management

Does this function belong in your operation?

Use when the business holds physical stock or consumables requiring quantity control.

Goods are received, issued, transferred or counted.

Wire reels, terminals, seals, clips and tapes are counted by part number. Terminal reels near the end raise a reorder alert. Kitted stock for a day’s plan is reserved.

Bring the records the workflow depends on.

  • Item and location list
  • Opening quantities
  • Reorder and movement rules

Outputs to check

  • Item-location balance register
  • Movement and count-adjustment history
  • Replenishment exception list

Follow the stock tracking and alerts workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set opening stock

    Approve item-location quantities and tracking rules.

  2. 2. Record movements

    Capture authorised receipts, issues, sales and transfers.

  3. 3. Compare counts

    Investigate physical differences before adjustment.

  4. 4. Review thresholds

    List shortages using the appropriate item and location level.

  5. 5. Handover replenishment

    Send requirements to purchasing or production without treating an alert as an approved order.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Issues material against a job, counts a rack on a slow afternoon, and answers for the difference. Every difference gets a name.

Counter staff

Checks recorded stock and location before confirming availability under the business's reservation rules.

Owner

Reads the alert list and the dead stock report, which is where the tied-up working capital sits.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Count differs from record

Investigate recent movements and approve an adjustment with the reason.

Negative balance attempted

Apply the agreed hold or exception rule and expose the cause.

Goods held for inspection

Keep them distinct from stock available for issue or sale.

Can this work independently?

Stock tracking can run from entered receipts and issues, but every physical movement needs a record. Purchase, sales, production and warehouse connections provide those movements. Reorder alerts signal a threshold; purchasing still decides quantity, supplier and approval.

Systems and records it connects with

  • Purchase order management: Authorised supplier commitments and open line balances.
  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Point of sale billing: Counter sales, tender records and authorised returns.
  • Multi-outlet stock: Outlet quantities and acknowledged transfer movements.

Configure, test and introduce the workflow.

  • Show us the godown and the counters. A note lists the locations and the item groups.
  • Supply levels per item and place, or ask for suggestions from history. Balances and alerts then appear for trial. A count is taken and loaded as the opening balance. The team checks a sample against the shelf.
  • Each group practises receipts, issues and transfers. Short cards for the shelves follow. Alerts reach named people. A review once the opening season ends lists slow stock.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Movements reconcile with location balances.
  • Count adjustments retain approval.
  • Alerts use the correct item and location threshold.
Wiring harness manufacturers

How the business operates.

A harness for one vehicle model can exist in dozens of variants, each with a different count of circuits, connectors and clips. Drawings are revised, and the floor must build to the revision that is live on the day, not the one printed last month. Old copies cause trouble.

Variant and drawing control

Hold each harness drawing, revision and variant build list, so that formboards, kits and cut lists are all produced from the live revision and from no older copy on any shelf.

Wire reel and terminal lots

Book wire reels and terminal lots at receipt, and link each reel and lot to the cutting and crimping orders they feed.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Harness family and variant master. Keep each harness family with its variants, circuit lists, connector housings, seals and label formats in one place, so that a customer pull always selects the right pinout. Variants never mix.
  • Drawing revision control. Hold the live drawing and earlier revisions for each harness family, and issue only the current one to cutting and to the formboard stations. Superseded sheets stay on file.
  • Wire reel and terminal stock. Book reels, terminals, connector housings and seals by lot with reorder levels, and issue them to orders against the cut list so the lot is known at the machine.
  • Cut list planning. Turn customer pulls into cut leads by colour, gauge and length, and schedule them across the cut-and-strip and crimping machines by applicator and due date.

Operational bottlenecks to check

Variant lists are copied between files

Each vehicle option changes the circuits in a harness. The list of what goes on each formboard is retyped from a drawing by hand, and an old copy stays in use on a second line for weeks.

Wire reels and terminal lots are not traced

Reels of different colours and terminal lots from several suppliers feed the same machines. After crimping, nothing on the cut lead says which reel or terminal lot it came from, so a pull test failure has no origin.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Customer pull

    Each pull is the customer’s call-off, and it arrives daily or weekly with variant codes and quantities, and they are entered against the harness family and its live drawing revision. Old pulls stay on file.

  2. 2. Cut list

    The system produces cut leads by wire colour, gauge and length, and the reels and terminal lots are issued to the cut-and-strip and crimping machines. Stock is booked down at once.

  3. 3. Cut and crimp

    Operators log the applicator, the first-piece checks and the batch counts, while crimp height and pull force readings are recorded against the press for that shift.

  4. 4. Assemble

    Trolleys of leads go to formboards with connector, grommet and clip kits. Each assembly station logs the harness number and the operator, so no unit loses its history.

  5. 5. Test

    Every harness is tested for continuity and insulation on the board tester. Failures are repaired, retested and logged against the serial.

  6. 6. Pack

    Passed harnesses are bagged, labelled with variant and serial, counted against the pull and shipped.

Industry reports to connect with

  • Harnesses built by family and variant
  • Crimp check results by applicator and terminal lot
  • Test failures by circuit and line
  • First-pass yield by variant

Questions before implementation.

When should wiring harness manufacturers consider stock tracking and alerts?

Use when the business holds physical stock or consumables requiring quantity control. Goods are received, issued, transferred or counted.

What should we bring to the requirements discussion?

Bring anonymised examples of Item and location list; Opening quantities; Reorder and movement rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Record stock movements and flag items reaching configured levels. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Recorded balances depend on timely movement entries. Physical availability must be confirmed through the agreed count and reservation process.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Movements reconcile with location balances. Use this check when reviewing the first working version.

Talk to us

Discuss stock tracking and alerts for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements