Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Wiring harness manufacturers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Reel lots of wire and terminal lots are linked to the harness serial they were used on. A customer’s complaint about a loose terminal traces back to the lot. Label printing follows the same record.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Wiring harness manufacturers

How the business operates.

A harness for one vehicle model can exist in dozens of variants, each with a different count of circuits, connectors and clips. Drawings are revised, and the floor must build to the revision that is live on the day, not the one printed last month. Old copies cause trouble.

Variant and drawing control

Hold each harness drawing, revision and variant build list, so that formboards, kits and cut lists are all produced from the live revision and from no older copy on any shelf.

Wire reel and terminal lots

Book wire reels and terminal lots at receipt, and link each reel and lot to the cutting and crimping orders they feed.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Harness family and variant master. Keep each harness family with its variants, circuit lists, connector housings, seals and label formats in one place, so that a customer pull always selects the right pinout. Variants never mix.
  • Drawing revision control. Hold the live drawing and earlier revisions for each harness family, and issue only the current one to cutting and to the formboard stations. Superseded sheets stay on file.
  • Wire reel and terminal stock. Book reels, terminals, connector housings and seals by lot with reorder levels, and issue them to orders against the cut list so the lot is known at the machine.
  • Cut list planning. Turn customer pulls into cut leads by colour, gauge and length, and schedule them across the cut-and-strip and crimping machines by applicator and due date.

Operational bottlenecks to check

Variant lists are copied between files

Each vehicle option changes the circuits in a harness. The list of what goes on each formboard is retyped from a drawing by hand, and an old copy stays in use on a second line for weeks.

Wire reels and terminal lots are not traced

Reels of different colours and terminal lots from several suppliers feed the same machines. After crimping, nothing on the cut lead says which reel or terminal lot it came from, so a pull test failure has no origin.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Customer pull

    Each pull is the customer’s call-off, and it arrives daily or weekly with variant codes and quantities, and they are entered against the harness family and its live drawing revision. Old pulls stay on file.

  2. 2. Cut list

    The system produces cut leads by wire colour, gauge and length, and the reels and terminal lots are issued to the cut-and-strip and crimping machines. Stock is booked down at once.

  3. 3. Cut and crimp

    Operators log the applicator, the first-piece checks and the batch counts, while crimp height and pull force readings are recorded against the press for that shift.

  4. 4. Assemble

    Trolleys of leads go to formboards with connector, grommet and clip kits. Each assembly station logs the harness number and the operator, so no unit loses its history.

  5. 5. Test

    Every harness is tested for continuity and insulation on the board tester. Failures are repaired, retested and logged against the serial.

  6. 6. Pack

    Passed harnesses are bagged, labelled with variant and serial, counted against the pull and shipped.

Industry reports to connect with

  • Harnesses built by family and variant
  • Crimp check results by applicator and terminal lot
  • Test failures by circuit and line
  • First-pass yield by variant

Questions before implementation.

When should wiring harness manufacturers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements