Skip to main content
GullySystem
Manufacturing

Bill of Materials for Wiring harness manufacturers

Define the materials and quantities needed for a manufactured item.

Manufacturing

Does this function belong in your operation?

Use when output quantities depend on a repeatable material or component list.

A product or production recipe is created or revised.

A harness variant lists each wire by colour, gauge and cut length, with terminals, seals, connectors and tape. Optional circuits switch on by vehicle trim. Every revision keeps its own list.

Bring the records the workflow depends on.

  • Finished-item codes
  • Component quantities and units
  • Revision and waste rules

Outputs to check

  • Approved material and subassembly list
  • Versioned material cost basis
  • Quantity-exploded requirement sheet

Follow the bill of materials workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define the output

    Identify the finished item, production quantity and unit.

  2. 2. List components

    Record materials, subassemblies and quantity conversions.

  3. 3. Review allowances

    Approve waste factors and permitted substitutes.

  4. 4. Release a version

    Retain the approved definition and its effective use.

  5. 5. Calculate requirements

    Expand the selected version for a planned quantity and pass shortages to planning or purchasing.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Estimator

Defines the material quantities and approved version used to cost a finished item or quotation.

Production in-charge

Sees what a job needs before it is released to the floor.

Storekeeper

Issues against the list. Anything beyond it is asked for in writing.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Component unavailable

Use only an approved substitute and retain its effect on cost and specification.

Design revised after release

Keep existing jobs on their approved version unless a controlled change is authorised.

Unit conversion inconsistent

Resolve the conversion before calculating requirements or issuing material.

Can this work independently?

A bill of materials can be maintained independently for costing and planning. Stock, purchasing and work orders use its approved version when connected. It does not reserve materials or schedule machines by itself, and a rate-based material total excludes labour or overhead unless separately defined.

Systems and records it connects with

  • Production planning: Demand, planned quantities and resource or material constraints.
  • Work orders: Released production jobs, material issues and output records.
  • Purchase orders: Authorised supplier commitments and open line balances.
  • Stock: Item-location quantities and authorised stock movements.

Configure, test and introduce the workflow.

  • You show a few finished items and describe how they are made. You get a written note on how the parent items and sub-assemblies will be laid out. Begin with a few products.
  • You supply item names, units and wastage habits from your sheets. A trial import comes back for you to correct before anything is relied on. Corrections come cheaply here. Recent purchase rates are connected to the lines. A costed list for a few products is laid beside your own working for comparison.
  • The estimator and the storekeeper explode a batch on the trial. You hear what is missing, and the layout is changed. Gaps surface early. New quotations start from the list. The team is shown how to save a version and how to mark alternates.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Component units are consistent.
  • Production uses the approved version.
  • Revisions preserve the earlier material definition.
Wiring harness manufacturers

How the business operates.

A harness for one vehicle model can exist in dozens of variants, each with a different count of circuits, connectors and clips. Drawings are revised, and the floor must build to the revision that is live on the day, not the one printed last month. Old copies cause trouble.

Variant and drawing control

Hold each harness drawing, revision and variant build list, so that formboards, kits and cut lists are all produced from the live revision and from no older copy on any shelf.

Wire reel and terminal lots

Book wire reels and terminal lots at receipt, and link each reel and lot to the cutting and crimping orders they feed.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Harness family and variant master. Keep each harness family with its variants, circuit lists, connector housings, seals and label formats in one place, so that a customer pull always selects the right pinout. Variants never mix.
  • Drawing revision control. Hold the live drawing and earlier revisions for each harness family, and issue only the current one to cutting and to the formboard stations. Superseded sheets stay on file.
  • Wire reel and terminal stock. Book reels, terminals, connector housings and seals by lot with reorder levels, and issue them to orders against the cut list so the lot is known at the machine.
  • Cut list planning. Turn customer pulls into cut leads by colour, gauge and length, and schedule them across the cut-and-strip and crimping machines by applicator and due date.

Operational bottlenecks to check

Variant lists are copied between files

Each vehicle option changes the circuits in a harness. The list of what goes on each formboard is retyped from a drawing by hand, and an old copy stays in use on a second line for weeks.

Wire reels and terminal lots are not traced

Reels of different colours and terminal lots from several suppliers feed the same machines. After crimping, nothing on the cut lead says which reel or terminal lot it came from, so a pull test failure has no origin.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Customer pull

    Each pull is the customer’s call-off, and it arrives daily or weekly with variant codes and quantities, and they are entered against the harness family and its live drawing revision. Old pulls stay on file.

  2. 2. Cut list

    The system produces cut leads by wire colour, gauge and length, and the reels and terminal lots are issued to the cut-and-strip and crimping machines. Stock is booked down at once.

  3. 3. Cut and crimp

    Operators log the applicator, the first-piece checks and the batch counts, while crimp height and pull force readings are recorded against the press for that shift.

  4. 4. Assemble

    Trolleys of leads go to formboards with connector, grommet and clip kits. Each assembly station logs the harness number and the operator, so no unit loses its history.

  5. 5. Test

    Every harness is tested for continuity and insulation on the board tester. Failures are repaired, retested and logged against the serial.

  6. 6. Pack

    Passed harnesses are bagged, labelled with variant and serial, counted against the pull and shipped.

Industry reports to connect with

  • Harnesses built by family and variant
  • Crimp check results by applicator and terminal lot
  • Test failures by circuit and line
  • First-pass yield by variant

Questions before implementation.

When should wiring harness manufacturers consider bill of materials?

Use when output quantities depend on a repeatable material or component list. A product or production recipe is created or revised.

What should we bring to the requirements discussion?

Bring anonymised examples of Finished-item codes; Component quantities and units; Revision and waste rules. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Define the materials and quantities needed for a manufactured item. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Use only for operations that make, assemble or formulate physical goods; ordinary service delivery needs a different workflow.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Component units are consistent. Use this check when reviewing the first working version.

Talk to us

Discuss bill of materials for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements