Skip to main content
GullySystem
Manufacturing

Work Order Management for Wiring harness manufacturers

Track a production job from material issue to completed output.

Manufacturing

Does this function belong in your operation?

Use when physical production needs a job-level record of materials and output.

A production plan releases a specific job.

Work orders for cutting, crimping, sub-assembly and final assembly follow the harness variant. Operators book counts at each stage. A shortfall of one sub-harness visibly stops the final line.

Bring the records the workflow depends on.

  • Required output
  • Approved material list
  • Process steps and due dates

Outputs to check

  • Released production-job record
  • Material and output reconciliation
  • Work-in-progress and variance list

Follow the work order management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Release the job

    Record output quantity, instructions and the approved material version.

  2. 2. Issue resources

    Link materials and assigned production stages to the work order.

  3. 3. Record progress

    Capture completed operations, interruptions and additional material requests.

  4. 4. Inspect output

    Pass the produced quantity to the agreed quality or acceptance check.

  5. 5. Close the job

    Reconcile accepted output, scrap, unused material and unfinished quantities.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Production in-charge

Releases jobs, moves them between stages, and holds the ones waiting on material with a reason typed in.

Supervisor

Marks the stage done from a tablet near the machine.

Storekeeper

Issues material against the job number and sees what is still due to it.

Owner

Looks at what is late, and at what is late for the same reason every week.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Material issued beyond plan

Record the reason and obtain the required approval.

Output below target

Keep the uncompleted balance or close it with an authorised shortfall reason.

Job paused mid-process

Retain work-in-progress quantities and the stage from which work will resume.

Can this work independently?

A work order needs an output definition and process instructions. It can use entered materials and progress, but bill-of-materials, stock and quality links make execution traceable. Sales orders provide demand; closing production is not the same as dispatching or invoicing the finished goods.

Systems and records it connects with

  • Bill of materials: Approved component quantities and production-definition versions.
  • Production planning: Demand, planned quantities and resource or material constraints.
  • Stock: Item-location quantities and authorised stock movements.
  • Job work delivery notes: Material dispatch and return references for outside processing.

Configure, test and introduce the workflow.

  • Tell us the stages a job passes through, in your words. A stage list comes back to confirm.
  • Sales orders are connected, and so is the bill of materials. A sample work order draws on each. A screen shows jobs by stage. The supervisor tries it beside the whiteboard.
  • Supervisors and the store use live work orders. The whiteboard is retired after a trial period.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Output links to its work order.
  • Material usage is traceable.
  • Unfinished quantities remain visible.
Wiring harness manufacturers

How the business operates.

A harness for one vehicle model can exist in dozens of variants, each with a different count of circuits, connectors and clips. Drawings are revised, and the floor must build to the revision that is live on the day, not the one printed last month. Old copies cause trouble.

Variant and drawing control

Hold each harness drawing, revision and variant build list, so that formboards, kits and cut lists are all produced from the live revision and from no older copy on any shelf.

Wire reel and terminal lots

Book wire reels and terminal lots at receipt, and link each reel and lot to the cutting and crimping orders they feed.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Harness family and variant master. Keep each harness family with its variants, circuit lists, connector housings, seals and label formats in one place, so that a customer pull always selects the right pinout. Variants never mix.
  • Drawing revision control. Hold the live drawing and earlier revisions for each harness family, and issue only the current one to cutting and to the formboard stations. Superseded sheets stay on file.
  • Wire reel and terminal stock. Book reels, terminals, connector housings and seals by lot with reorder levels, and issue them to orders against the cut list so the lot is known at the machine.
  • Cut list planning. Turn customer pulls into cut leads by colour, gauge and length, and schedule them across the cut-and-strip and crimping machines by applicator and due date.

Operational bottlenecks to check

Variant lists are copied between files

Each vehicle option changes the circuits in a harness. The list of what goes on each formboard is retyped from a drawing by hand, and an old copy stays in use on a second line for weeks.

Wire reels and terminal lots are not traced

Reels of different colours and terminal lots from several suppliers feed the same machines. After crimping, nothing on the cut lead says which reel or terminal lot it came from, so a pull test failure has no origin.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Customer pull

    Each pull is the customer’s call-off, and it arrives daily or weekly with variant codes and quantities, and they are entered against the harness family and its live drawing revision. Old pulls stay on file.

  2. 2. Cut list

    The system produces cut leads by wire colour, gauge and length, and the reels and terminal lots are issued to the cut-and-strip and crimping machines. Stock is booked down at once.

  3. 3. Cut and crimp

    Operators log the applicator, the first-piece checks and the batch counts, while crimp height and pull force readings are recorded against the press for that shift.

  4. 4. Assemble

    Trolleys of leads go to formboards with connector, grommet and clip kits. Each assembly station logs the harness number and the operator, so no unit loses its history.

  5. 5. Test

    Every harness is tested for continuity and insulation on the board tester. Failures are repaired, retested and logged against the serial.

  6. 6. Pack

    Passed harnesses are bagged, labelled with variant and serial, counted against the pull and shipped.

Industry reports to connect with

  • Harnesses built by family and variant
  • Crimp check results by applicator and terminal lot
  • Test failures by circuit and line
  • First-pass yield by variant

Questions before implementation.

When should wiring harness manufacturers consider work order management?

Use when physical production needs a job-level record of materials and output. A production plan releases a specific job.

What should we bring to the requirements discussion?

Bring anonymised examples of Required output; Approved material list; Process steps and due dates. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track a production job from material issue to completed output. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This is a production work order; field repairs and customer visits belong in job cards.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Output links to its work order. Use this check when reviewing the first working version.

Talk to us

Discuss work order management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements