Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Aluminium die casting companies

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Each casting carries a date code linked to the alloy lot, die and cell. An engine bracket that leaks traces to the melt it came from. Customers receive the code on their delivery.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Aluminium die casting companies

How the business operates.

A die casting cell is fast and unforgiving. A furnace holds molten alloy, a machine fires it into a steel die in seconds, and a trim press removes runners and overflows. A hundred castings an hour leave the cell. Small shifts in die temperature, spray or metal quality show up as porosity or cold shuts.

Alloy lot and melt record

Record ingot lots, returned scrap, degassing and the chemistry sample for each melt, and tie them to the shots cast.

Die register and shot counts

Count shots per die, log cleans, polishing and repairs, and flag a die before it passes its limit.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Part list and call-offs. Hold each casting with its drawing revision, alloy grade such as A380 or ADC12, die and route. Load call-offs and revisions by week.
  • Alloy and ingot stock. Receive ingot by heat lot, issue it to melts, and keep returned gates and dross on separate accounts.
  • Melt and chemistry record. Record each melt, its charge, degassing time and spectrometer sample, then release it to the holding furnace once the chemistry passes.
  • Machine and die planning. Plan machines by clamping tonnage and dies by availability and shot count, and show which die change comes next to the setters.

Operational bottlenecks to check

Alloy lots mix in the furnace

Fresh ingot and returned runners are charged together into one furnace. When a casting fails chemistry, the lot that fed that melt is unclear, and every casting from the shift comes under doubt.

Die life is counted on a tag

Shots run on a die decide when it needs a clean, a polish or a repair. The tag is updated at changeover, but a die pulled off the machine in a hurry keeps yesterday’s count and nobody notices until it cracks.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Call-off and plan

    Call-offs are loaded by part and week. The planner assigns a machine, a die and an ingot lot, then checks the die’s shot total against its cleaning limit before the setter is told.

  2. 2. Melt

    Ingot and returned gates are charged, degassed with a rotary impeller and sampled for the spectrometer. A passing chemistry result releases the melt to the holding furnace.

  3. 3. Casting run

    The operator records the die, the plunger speed settings, the intensification pressure and the shots. Good and rejected counts are entered when the run closes.

  4. 4. Trim and remelt

    Castings go to the trim press while biscuits, runners and overflow wells are weighed back for remelt. Yield per part updates on the spot.

  5. 5. Test and machine

    Samples go for X-ray, density index or helium leak checks. Passed lots follow the route card to machining, deburring or impregnation.

  6. 6. Dispatch

    Crates are counted, labelled and loaded. Once the truck leaves, the invoice and the dispatch record close the call-off.

Industry reports to connect with

  • Call-offs against shipments by part and week
  • Melts with chemistry results and castings made
  • Shots and rejects by die
  • Metal yield by part and by melt

Questions before implementation.

When should aluminium die casting companies consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements