Skip to main content
GullySystem
Manufacturing

Batch and Serial Tracking for Auto parts manufacturers

Trace goods using batch identifiers or individual serial numbers.

Manufacturing

Does this function belong in your operation?

Use when physical goods require lot history, expiry control or individual identification.

Traceable goods are received, produced or moved.

Each shift’s lots get a number linked to the coil and the machine. A complaint traces by lot. Suspect parts are located in the warehouse or at the customer.

Bring the records the workflow depends on.

  • Item tracking rules
  • Batch or serial identifiers
  • Movement and expiry records

Outputs to check

  • Lot or unit movement history
  • Trace-forward and trace-back report
  • Held or expiring stock list

Follow the batch and serial tracking workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Set tracking rules

    Identify which items require lot, serial or expiry details.

  2. 2. Capture identity

    Record the required reference at receipt or production.

  3. 3. Carry it through movement

    Preserve identifiers during transfer, issue and supply.

  4. 4. Control held stock

    Apply the authorised inspection or restriction decision.

  5. 5. Trace an issue

    Find source and destination records for the affected lot or unit.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Records the batch at goods receipt and issues the oldest one first.

Quality checker

Holds a batch, releases it, or marks it rejected, and the stock obeys.

Service desk

Types a serial number and sees the sale date, the warranty and every visit made since.

Owner

Asks one question after a complaint: who else received it.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Unknown batch at receipt

Hold the affected quantity until identification is resolved.

Duplicate serial number

Investigate the physical units and source entries before accepting another movement.

Batch put on hold

Prevent the agreed issues or sales and record the authority that later releases it.

Can this work independently?

Traceability requires identifiers on the physical goods and their recorded movements. It can run from controlled imports, but goods receipt, production, stock and sales must preserve the same references. A trace report cannot recover identifiers that were never captured at a handoff.

Systems and records it connects with

  • Goods receipt: Counted, accepted and rejected supplier-delivery quantities.
  • Stock: Item-location quantities and authorised stock movements.
  • Quality control: Inspection results and authorised hold or release decisions.
  • Invoice management: Issued invoice references, line amounts and outstanding balances.

Configure, test and introduce the workflow.

  • You tell us which items carry shelf life or serials. We write back how each will be numbered.
  • The storekeeper shows how goods arrive. You get a goods receipt screen to try, with a field for the supplier’s lot. Send current stock. A trial import comes back with gaps listed for the team to fill, using whatever batch details exist.
  • Counter and service staff practise. They issue by batch and look up a serial, and you get a trained group and a corrected import.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Tracked items cannot move without required identifiers.
  • Serial references do not duplicate active units.
  • A lot can be traced to its recorded recipients.
Auto parts manufacturers

How the business operates.

An auto parts plant makes components to a customer’s drawing, such as a stamped bracket, a rubber bush, a cast housing or a moulded clip. The buyer is a vehicle maker. Each part number carries a drawing revision, a control plan, a failure-mode analysis (FMEA) and, where the buyer asks, a first-sample approval file (PPAP) before volume begins. Releases change without notice.

Customer part numbers and revisions

Hold each customer part with its drawing revision, material, control plan and PPAP file on one record, so that operators see the current print at the press. Nobody works from a superseded sheet.

Release schedules

Load customer releases and plan presses, tooling and coil against changing quantities. Every change is marked against the last release, so planners see what moved before booking.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer part master. Hold each part number with revision, material grade, die list, control plan and label format, so a setup never starts from a loose spreadsheet.
  • Revision control. Release a new drawing revision to the operator terminal and the gauge list together, and the earlier print is blocked at the machine.
  • Approval package files. Attach ballooned drawings, dimensional reports, material certificates and Cpk studies to the part and revision, so a first-article submission is assembled in one place.
  • Customer release planning. Load the forecast and daily call-offs from each customer plant, then compare them with the previous schedule before the planner sequences the week.

Operational bottlenecks to check

Customer releases change the plan daily

Weekly and daily schedules arrive from several vehicle plants, each in its own file layout, and the planner retypes them into a sheet. A late amendment is missed until a truck is short. The line stops at the customer.

Drawing revisions reach the shop floor late

A customer revises a drawing and the quality department updates the gauge, but the press operator still works from the earlier sheet at the machine. The lot is made to the old print. It is rejected on arrival at the dock.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Part set-up

    A customer part number is entered with drawing revision, material grade, die list, control plan and label format, and the PPAP documents attach to that same revision.

  2. 2. Release received

    Load the schedule from the plant and the system compares it with the previous release, highlighting each part whose quantity or ship date moved. The planner then re-sequences the press line.

  3. 3. Plan and material

    Machines, dies and material are planned against the release, so a shortfall in coil, bar stock, resin pellet or threaded inserts shows before the run is booked. No press starts short.

  4. 4. Production lots

    Operators scan the press number, die or mould, shift and heat or resin lot at start-up, and first-off and patrol checks are logged against the lot as it runs.

  5. 5. Final check and dispatch

    Final inspection against the control plan puts a failed lot on hold, then labels print in the VDA or AIAG layout the customer asks for and ship notice leaves. A held lot cannot ship.

  6. 6. Complaints and returns

    A complaint opens against the lot. Containment, root cause and corrective action are written into an 8D reply, and returnable boxes are reconciled with the customer plant afterwards.

Industry reports to connect with

  • Release changes by customer plant and part
  • Lots by inspection result and die
  • Parts shipped against each release
  • Plating and heat treatment returns, short and rejected

Questions before implementation.

When should auto parts manufacturers consider batch and serial tracking?

Use when physical goods require lot history, expiry control or individual identification. Traceable goods are received, produced or moved.

What should we bring to the requirements discussion?

Bring anonymised examples of Item tracking rules; Batch or serial identifiers; Movement and expiry records. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Trace goods using batch identifiers or individual serial numbers. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

Traceability does not replace product testing, recall decisions or regulatory obligations.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Tracked items cannot move without required identifiers. Use this check when reviewing the first working version.

Talk to us

Discuss batch and serial tracking for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements