Skip to main content
GullySystem
Manufacturing

Job Work Management for Auto parts manufacturers

Track material sent to an outside processor and returned after work.

Manufacturing

Does this function belong in your operation?

Use when your materials leave for processing and must be reconciled on return.

A production stage is subcontracted with material supplied by your business.

Heat treatment, plating or powder coating happens at outside vendors on a delivery challan. Returns are reconciled by count. Rejected pieces are charged back to the vendor with a debit note.

Bring the records the workflow depends on.

  • Vendor and process details
  • Material quantities
  • Return and wastage terms

Outputs to check

  • Subcontract dispatch and return register
  • Processor-held material balance
  • Job-work charge reconciliation

Follow the job work management workflow.

Use this sequence to compare your current process with the proposed module. Agree the owner, permission and exception at each step.

  1. 1. Define outside processing

    Record the vendor, process and expected return terms.

  2. 2. Dispatch material

    Identify quantities, lots and the linked delivery document.

  3. 3. Track work outside

    Keep material balances and promised returns by processor.

  4. 4. Receive and inspect

    Record accepted output, waste and unresolved differences.

  5. 5. Reconcile charges

    Match processing bills and close only the settled material balance.

Who uses the module, and who approves?

Keep responsibilities distinct even when one person holds more than one role.

Storekeeper

Writes the delivery note, receives the lots and knows which vendor is holding what this morning.

Production in-charge

Chases the process that is holding a job, and plans around the fortnight a coater takes.

Accounts assistant

Compares processing charges with authorised quantities and records unresolved material or rate differences.

Decide how exceptions are handled.

These business rules belong in configuration and testing. A normal transaction alone does not demonstrate that the workflow is ready.

Partial return

Record received output and leave the remaining material balance with the processor.

Excess wastage

Hold the difference for investigation and authorised disposition.

Material sent to another processor

Record an approved transfer with both locations identifiable instead of closing the original job.

Can this work independently?

This can track outside processing with entered dispatch and receipt records. Stock and accounting connections reconcile material ownership and processing charges; quality control decides acceptance. A vendor's completion message is not a physical return or proof that the returned output meets specification.

Systems and records it connects with

  • Work orders: Released production jobs, material issues and output records.
  • Stock: Item-location quantities and authorised stock movements.
  • Vendor bills: Supplier invoice lines and authorised posting status.
  • Purchase returns: Approved supplier-return quantities and adjustment references.

Configure, test and introduce the workflow.

  • We list the outside processes you use and the vendors for each. You describe how notes and returns are handled today. A flow diagram comes back for your approval.
  • Rates, process names and wastage allowances are entered. You confirm them with the production team. Material currently lying outside is loaded from your registers. The store team checks balances with the vendors. Mistakes surface early.
  • New outward notes are made on the screen while the old book continues. Returns are booked and compared. The team is trained. The paper book is retired. The oldest balances are reviewed at the next meeting.

Check the result before rollout.

Apply these checks to a sample from the agreed workflow, then repeat with an exception. Keep the expected result beside the test record.

  • Sent and returned quantities reconcile.
  • Material held by each processor remains visible.
  • Charges link to the relevant job.
Auto parts manufacturers

How the business operates.

An auto parts plant makes components to a customer’s drawing, such as a stamped bracket, a rubber bush, a cast housing or a moulded clip. The buyer is a vehicle maker. Each part number carries a drawing revision, a control plan, a failure-mode analysis (FMEA) and, where the buyer asks, a first-sample approval file (PPAP) before volume begins. Releases change without notice.

Customer part numbers and revisions

Hold each customer part with its drawing revision, material, control plan and PPAP file on one record, so that operators see the current print at the press. Nobody works from a superseded sheet.

Release schedules

Load customer releases and plan presses, tooling and coil against changing quantities. Every change is marked against the last release, so planners see what moved before booking.

See the full industry workflow, reports and implementation plan →

The records that hold the operation together.

  • Customer part master. Hold each part number with revision, material grade, die list, control plan and label format, so a setup never starts from a loose spreadsheet.
  • Revision control. Release a new drawing revision to the operator terminal and the gauge list together, and the earlier print is blocked at the machine.
  • Approval package files. Attach ballooned drawings, dimensional reports, material certificates and Cpk studies to the part and revision, so a first-article submission is assembled in one place.
  • Customer release planning. Load the forecast and daily call-offs from each customer plant, then compare them with the previous schedule before the planner sequences the week.

Operational bottlenecks to check

Customer releases change the plan daily

Weekly and daily schedules arrive from several vehicle plants, each in its own file layout, and the planner retypes them into a sheet. A late amendment is missed until a truck is short. The line stops at the customer.

Drawing revisions reach the shop floor late

A customer revises a drawing and the quality department updates the gauge, but the press operator still works from the earlier sheet at the machine. The lot is made to the old print. It is rejected on arrival at the dock.

How work flows across this business

This module sits within a wider operating process. Use the sequence to identify the other teams and records affected by a change.

  1. 1. Part set-up

    A customer part number is entered with drawing revision, material grade, die list, control plan and label format, and the PPAP documents attach to that same revision.

  2. 2. Release received

    Load the schedule from the plant and the system compares it with the previous release, highlighting each part whose quantity or ship date moved. The planner then re-sequences the press line.

  3. 3. Plan and material

    Machines, dies and material are planned against the release, so a shortfall in coil, bar stock, resin pellet or threaded inserts shows before the run is booked. No press starts short.

  4. 4. Production lots

    Operators scan the press number, die or mould, shift and heat or resin lot at start-up, and first-off and patrol checks are logged against the lot as it runs.

  5. 5. Final check and dispatch

    Final inspection against the control plan puts a failed lot on hold, then labels print in the VDA or AIAG layout the customer asks for and ship notice leaves. A held lot cannot ship.

  6. 6. Complaints and returns

    A complaint opens against the lot. Containment, root cause and corrective action are written into an 8D reply, and returnable boxes are reconciled with the customer plant afterwards.

Industry reports to connect with

  • Release changes by customer plant and part
  • Lots by inspection result and die
  • Parts shipped against each release
  • Plating and heat treatment returns, short and rejected

Questions before implementation.

When should auto parts manufacturers consider job work management?

Use when your materials leave for processing and must be reconciled on return. A production stage is subcontracted with material supplied by your business.

What should we bring to the requirements discussion?

Bring anonymised examples of Vendor and process details; Material quantities; Return and wastage terms. Show who creates, checks and changes each record. Use only records from an activity that meets the suitability conditions above.

Does this replace our existing business software?

The starting point is your current system and the gap you need to close. Track material sent to an outside processor and returned after work. Configuration, a connected module or a custom build are evaluated against that gap before a replacement is proposed.

What is outside this module?

This concerns outsourced physical processing, not general professional-services subcontracting.

How are scope, price and rollout decided?

The proposal follows a review of your records, user roles, branches and existing software. Data migration, connections, training and support are scoped separately where needed. Sent and returned quantities reconcile. Use this check when reviewing the first working version.

Talk to us

Discuss job work management for your business.

Tell us which workflow needs attention and which systems your team uses. The next step is a requirements discussion and a written scope.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements