Skip to main content
GullySystem

Crowd counts and thunder holds at a water park

The capacity counter moves each attraction’s count up and down with entries and exits, and measures it against the safe headcount. When thunder is called, the weather hold, the clearing and the reopening are logged with times. The entrance desk and the duty manager read the same figures.

What the capacity counter and holds record

Two kinds of fact are kept here. One is a running count for each attraction against its limit. The other is the story of a weather hold, with its times. Both reach the day report for the duty manager and the owner.

Live count for each attraction

Every entry and exit scan moves the count for that attraction. The wave pool, each slide and the lazy river keep separate totals. Each total is compared with the safe headcount held on that pool’s record. The comparison is automatic.

Peak counts through the day

The counter keeps the highest figure each attraction reached and when it happened. Those peaks feed the attendance and peak counts report. Managers see whether a limit suits the real crowds. Patterns appear after a few busy weekends.

Hold, clearing and reopening times

A thunder hold is marked by the manager on duty. The record keeps the time of the hold, the time each pool was cleared and the time each one reopened.

Refund and rain-pass decisions

Guests who ask for a refund or a rain pass are noted against the day of the hold. The decision made for each, and who made it, is kept. The weather holds report reads from these notes.

A busy afternoon and a thunder warning

A crowd and a storm are the two hardest things a duty manager handles together. Four moments show the counter and the hold record at work. They run from a filling wave pool to a slow reopening. Each is brief.

Gate desk watching the wave pool

On a hot Sunday the wave pool count climbs toward its limit. The entrance desk sees it on screen. Queues for the pool are explained at the gate, and guests are pointed to a quieter slide.

Slide queue and an empty river

One slide has a long queue while the lazy river is half empty. A look at the counts settles it. Guests are sent along the park, and the queue shortens. Guards on the quiet attraction are not wasted.

Manager calling a thunder hold

A warning arrives at the control room. The manager on duty marks the hold, and the time is stamped. Guards clear the pools, and each clearing time is logged against its attraction. Refund requests start at the gate.

Reopening and the day report

The weather clears. Each pool is reopened in turn, and the manager records every reopening time. By evening the day report shows hold duration, refunds given and the peak count of each attraction. Nobody reconstructs it from memory.

Who watches the counts and the holds

A count is of little use unless the right person sees it at the right time. Four roles read this screen. The duty manager alone marks a hold, and the others act on what is marked.

Duty managers and park owners

Duty managers see counts against limits for every attraction and mark weather holds. Owners read the day’s takings beside the counts and the hold times. Together they judge a hot weekend against a rainy one. The comparison is fair.

Entrance desk and ticket counters

Counter staff see which attractions are close to their limit and which are closed by a hold. They sell tickets and bands with that picture in front of them. They never change counts. That stays with the manager.

Head guards and lifeguards

Head guards see counts for their own slides and pools, and they receive the hold. Lifeguards at a tower learn that the pool is cleared. Each guard knows when to stand down. That saves a radio call.

Plant technicians on a quiet pool

Technicians use the hold window. A cleared pool is a good chance to check a pump or a filter. They see how long each pool stays closed, so the work is planned around the storm and not against it.

Decisions to settle for crowd counts

Counts only mean something if the scans are reliable and the limits are accepted. Four choices are made with the duty manager before the first gate opens. Setting them up falls to GullySystem staff. Each is simple.

Who may mark a hold

Decide who can mark a weather hold and who can reopen a pool. A park may name the duty manager only. Decide too who can correct a count after a scanner error, and how it is noted.

Which attractions are counted

Not every area needs a scan point. Each park picks which pools, slides and rivers have their own count. A shallow play area may be counted with the pool beside it, or left out. Decide early.

How scans arrive from the gate

Wristband and barcode readers decide how entries and exits arrive, so they are reviewed in the first workshop with GullySystem staff. If a reader cannot report exits, the park agrees a manual step. Plan it together.

Which report matters first for capacity counter and weather holds

Attendance and peak counts by attraction is the report to read first, with weather holds, duration and refunds given beside it. Decide who reads them after a storm. Decide too what is done with the refund list.

How counts and holds link to other features

Crowd counts and storms touch every desk in the park. Limits come from the register and scans come from the gate. Holds, closures and refunds then pass on to the people who need them. Five links carry that. Each one removes a phone call between desks.

  • Pool register supplies each safe headcount
  • Tickets and wristbands supply entry and exit scans
  • Water quality closures show beside the live counts
  • Maintenance tickets use hold windows for plant work
  • Incident reports note the count at the time

Where the capacity counter stops

This feature reports and records. It does not forecast the weather, decide when thunder is near or order guests out of the water. Those calls belong to the duty manager and the guards. The safe headcount stays a decision for the park and its adviser. A small park with one pool can count by hand at the gate.

FAQ

Frequently asked questions

What does the entrance desk see when a pool is full?

The desk sees the live count against the limit, so it can tell guests which attractions have room. It is a simple screen. The count is only as accurate as the entry and exit scans that feed it.

Can a count be corrected after a scanner mistake?

A person with the right to correct counts can adjust one and add a note. The correction is recorded with the time and the name. Who holds that right is the park’s decision. Keep it narrow.

Who decides when thunder means a hold?

The manager on duty decides, following the park’s own weather policy. The system does not detect thunder or forecast it. It records the decision and its times once the manager has marked the hold. That record matters later.

Where do the hold times appear afterwards?

They appear in the weather holds report, with the duration of each hold and the refunds given, and again for the duty manager at day end. Both come from the times already logged. Nobody types them twice.

Does it count guests on a slide or only in pools?

Each attraction with its own scan point or record has a count, including a slide landing pool. The park decides in advance which areas are counted. A slide may share a count with its pool. Settle this early.

Where it fits

How this feature fits the system.

Water Park Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Tickets and wristbands

Counters sell entry, child rates and bundles from one price list, and a wristband balance is spent later at stalls and kiosks.

Point of Sale Billing

Lifeguard roster and rotation

Guards clock in at their tower or slide top, and rotation breaks are logged so the head guard sees who is due to move.

Attendance & Time Tracking

Pump, filter and slide maintenance

Backwash cycles, pump service dates and slide surface checks are scheduled by attraction, with outside inspector dates held beside each.

Asset AMC Tracking
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements