Skip to main content
GullySystem

Pool and slide register for a water park

The pool and slide register gives every pool, slide and landing pool in a water park its own record. It holds the water volume, the safe headcount, the depth zones and the guard posts the attraction needs. Plant technicians, head guards and the duty manager read one entry.

What each pool and slide record keeps

A water park runs from a list of attractions. That list has to be exact. Each record describes one pool, slide or landing pool in the park’s own terms. Other features read these facts instead of asking staff to type them twice.

Water volume for each pool

A pool’s volume is entered once, from the plant drawings or the technician’s own measure. Dosing and backwash planning read the figure from here. A lazy river and a toddler splash pool carry different numbers. Nobody has to guess it.

Safe headcount limit

Every attraction holds a safe headcount, set by the park with its own safety adviser. The limit sits on the record. It is the figure the capacity counter measures against, and each attraction keeps its own.

Depth zones of the pool

A wave pool is deep at one end and shallow at the other. Each depth zone is listed. A guard post can then be tied to the zone it watches, and a new guard learns where the deep water starts.

Guard posts the attraction needs

This list names the towers, slide tops and landing pool posts that each attraction needs open. If the roster leaves a post empty, the gap shows against this list. Head guards plan the shift from it.

A day with the register open

Staff read the register more than they edit it. People in different jobs open the same record for different reasons, from the first reading before the gates open to the last count at closing. Here are four moments from an ordinary day.

Technician before the opening readings

Before taking chlorine and pH at the wave pool, the plant technician opens its record and checks the volume. A dose that suits the lazy river would be wrong here. One entry settles which pool is which.

Head guard building the shift

The head guard opens each slide and reads the posts it needs, from the top platform to the landing pool. Placing guards on the roster becomes a matter of filling the listed posts one by one. Gaps are plain.

Entrance desk on a crowded Saturday

A queue builds at the gate. The desk checks the wave pool’s limit on its record and compares it with the live count. Guests are told honestly which attractions have room and which are close to full.

Manager closing slides for winter

At the end of the warm season the manager marks slides and pools off-season. History stays on file with the attraction. Winter repair tickets, such as a fibreglass repair, are raised against it until the park opens again.

Who reads the pool and slide register

Four groups of staff rely on the register, and each looks for something different on the screen. Everyone opens the same record. Only the question changes from person to person.

Park owners and duty managers

Owners and duty managers read the list of attractions with their limits and guard posts. They judge whether the day’s plan fits the park. Owners also see which attraction is resting for the season. Guard posts matter for late openings.

Plant technicians at the pool

Technicians read the volume and name of each pool before they dose or backwash. They also raise repair tickets against an attraction. Every pump and slide fault then points to the right record, and the history of that attraction stays together.

Head guards and lifeguards

Head guards see the posts each attraction needs and the depth zones it covers. A lifeguard checking a shift reads which tower or slide top the post belongs to. The post shows which zone it overlooks.

Ticket counters and gate staff

Counter and gate staff edit nothing here. They read the safe headcount for each attraction. What they tell a guest about space then matches what the park has decided is safe. A guest asking about the wave pool gets a straight answer.

Decisions to settle for the register

Before the register is loaded, the park settles four questions with its own plant and safety staff. Settling them early keeps the record clean from day one. GullySystem staff can carry out the entry.

Who may change a record for Pool and slide register

Decide who can alter a volume or a safe headcount. A park might give that right to the duty manager alone, with the plant lead able to correct a volume.

Which water features are left out

Not every wet area needs a record. Decide whether a shallow play area with no guard post is entered as an attraction or left out. The answer shapes the counts and reports. A small decision, but a lasting one.

How existing lists come across for Pool and slide register

A park may already hold its attractions in a spreadsheet or on plant drawings. GullySystem staff enter them the way the plant team works. The duty manager reads them back. This happens before any ticket is sold.

Which report matters first for Pool and slide register

Pick the report the park will read first. Attendance and peak counts by attraction is a good candidate, because it shows whether each limit on the register suits the real crowds. Settle it before opening day.

How the register feeds the other features

The register is the base for other features. When a pool or slide is entered here, it can be chosen on every other screen of the product. That gives plant, towers and gates one name and one set of facts for each attraction, so readings, guard posts and repair tickets share one place.

  • Water quality log attaches each reading to a pool
  • Lifeguard roster compares filled posts with posts listed here
  • Capacity counter measures entries against each safe headcount
  • Maintenance tickets are raised against the same attraction
  • Chemical use is drawn and reported by pool

Where the register stops

The register describes attractions. It does not design them or approve them. The safe headcount, the depth zones and the guard posts come from the park, its safety adviser and the people who built the attraction. Inspection and any licence stay with the owner. A single club pool with a handful of swimmers can keep a printed sheet instead.

FAQ

Frequently asked questions

Can a slide have a separate record from its landing pool?

Yes, each can have its own record, with separate limits and guard posts. That keeps the count at the splash zone apart from the queue at the top of the slide. The split is plain.

Who enters the safe headcount for an attraction?

The park decides the figure with its own safety adviser, and a person with edit rights keys it in. GullySystem does not calculate a safe headcount. It does not advise on what the figure should be.

What happens to a record when a pool closes for winter?

The attraction is marked off-season and stays on file with its history. Repairs are kept as tickets against it, so winter work has a clear place to land. It returns to use when the park reopens.

Can I see which guard posts an attraction needs?

Yes, each record lists the towers, slide tops and landing pool posts the attraction needs. The head guard reads that list while building the roster. A post left unfilled stands out. That is the purpose.

Does the register hold photographs or plant drawings?

Not as standard. The record keeps volume, safe headcount, depth zones and guard posts. Drawings are better kept in the plant room file. Anything beyond the standard record is a question for GullySystem staff at set-up.

Where it fits

How this feature fits the system.

Water Park Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Tickets and wristbands

Counters sell entry, child rates and bundles from one price list, and a wristband balance is spent later at stalls and kiosks.

Point of Sale Billing

Lifeguard roster and rotation

Guards clock in at their tower or slide top, and rotation breaks are logged so the head guard sees who is due to move.

Attendance & Time Tracking

Pump, filter and slide maintenance

Backwash cycles, pump service dates and slide surface checks are scheduled by attraction, with outside inspector dates held beside each.

Asset AMC Tracking
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements