Skip to main content
GullySystem

Water quality and dosing log for pools

The water quality and dosing log keeps every chlorine, pH, temperature and filter pressure reading for each pool in a water park. Technicians key values on a phone at the pool edge. An out-of-range value alerts the manager on shift and closes that pool in the system.

What the water quality log records

Readings are only useful if they can be found again. Each one is kept against its pool, its hour and the person who took it. That turns a clipboard sheet into a record the park can search. Searching takes seconds.

Four values for each pool

A reading covers four values. Chlorine, pH, temperature and filter pressure are keyed for each pool at the pool edge, on a phone. Each is stored with the hour it was taken and the name of the technician.

The safe range for each pool

Every pool has its own safe range for each value, set with the plant staff and local health rules. Each new reading is compared with that range. A wave pool and a toddler pool may differ. The range follows the pool.

Opening sheet and signature

The opening readings for Pool 1 to Pool 6 form one sheet. The duty manager signs it. A pool whose reading is out of range stays closed, and the sheet shows which one and why.

History of out-of-range values

Every out-of-range entry stays on file with its pool and hour, and the record notes who was alerted. Nothing is overwritten. A guest’s complaint of eye irritation is answered by a search, and the search reaches back across the whole season.

A day of readings at the pool edge

Readings follow the rhythm of the park. The first round happens before the gates open, and later rounds follow through the day. Four moments show how readings are used on a hot weekend and on a quiet weekday at the park.

Technician at opening round

The plant technician walks from pool to pool before the gates open, testing and keying values on a phone. Each entry lands on the right pool record. The walk ends with a full sheet for the duty manager.

Alert at the wave pool

A pH value comes in outside its range. Alerts reach the manager on shift, and the wave pool is closed in the system. Gate and guard staff see the closure on their own screens, so nobody sends guests toward a closed pool.

Dosing controller export

Where a dosing controller can export values, they are loaded as they arrive. Where it cannot, the technician types them in. Both kinds sit side by side on the pool’s record, each marked by its source.

Complaint at the guest desk

A guest reports stinging eyes after the lazy river. Next, the manager opens that pool’s readings for the hour and sees the chlorine value and who took it. The guest gets an answer from the record. It is not a guess.

Who enters and who reads the readings

This screen has a small group of writers and a wider group of readers. Plant staff enter values. Managers, guards and the front desk read them. Each person sees what bears on their own task.

Plant technicians at the pool

Technicians enter the four values on a phone and see which chemical drums are low. They get the alert when a reading falls outside its range. Entry is quick. The pool is already chosen, so only the four values need typing.

Park owners and duty managers

Owners and duty managers read the pool readings that fell out of range. They sign the opening sheet each morning. When an alert arrives, they decide when the pool reopens and see the earlier values.

Head guards and lifeguards

Head guards see which pools are open or closed. A closed pool is clear on their screen. Guards at its tower know to clear swimmers. They hold the post until the manager reopens the pool.

Ticket counters and gate staff

Counter staff do not edit readings. They see that a pool is closed, so they can tell guests at the gate. The message matches the closure that the plant team already logged, word for word.

Decisions to settle before readings start

Good records depend on good ranges and clear rules. These four decisions are made with the plant team and the duty manager before the first reading is keyed.

Who may change a safe range

Decide who can alter a safe range or edit a past reading. A park may allow only the plant lead to change a range. Past readings are better kept fixed. Corrections should be new entries.

Which values are left out

Chlorine, pH, temperature and filter pressure are the four values asked for. Decide whether any pool needs fewer values, such as a landing pool that shares water with a slide. The answer sits with the plant team.

How paper sheets come across for Water quality and dosing log

Past clipboard sheets can stay in a folder or be keyed in. Keying in only the current season is a fair choice. GullySystem staff agree the approach with the plant team. History starts from the first live reading.

Which report matters first for Water quality and dosing log

Pool readings by day, with out-of-range entries, is the report to read first. Decide too what happens when one pool shows repeated trouble, and name the person who follows it up.

How readings connect to the other features

A reading rarely stands alone. If a value falls outside its range, other parts of the park need to know. If a chemical drum runs low, the store needs to hear. These facts pass on without anyone retyping them or phoning the next person on the list.

  • Pool register supplies each pool’s name and volume
  • Chemical stock is drawn against the pool that was dosed
  • Closed pools show on the capacity counter
  • Repeated trouble becomes a pump or filter ticket
  • Out-of-range entries appear in the incident summary

Where the water quality log stops

It records and compares. It does not test the water, and it does not decide what a safe value is. Ranges are set with the park’s plant staff and local health rules. Treatment, sampling and any report to a health authority stay with the owner and the plant team. A single pool with one technician may be fine on a printed sheet.

FAQ

Frequently asked questions

Who is alerted when a reading is out of range?

The manager on shift is alerted at once, and the pool closes in the system. Who else should be told is decided with the plant staff. That list is set up first. It can be changed later.

Can a technician enter readings without a signal at the pool?

That depends on the park’s phone coverage, which is checked on the site walk. If entry is not possible at the pool edge, readings can be keyed from the plant room. The value still reaches the pool record.

Can past readings be edited after they are saved?

Who may edit is the park’s choice. We suggest keeping the original and adding a corrected entry beside it. That way the history shows both values and who changed what. It protects the record from doubt.

Does the log tell a technician how much chlorine to add?

No, it does not. Storing and comparing values is the job here. How much to dose is a decision for the plant technician, following the park’s own procedure. Drum use is recorded afterwards against the pool.

Can I see all readings for one pool across a season?

Yes, each reading is kept with its pool, so a season’s entries can be read by pool and by day. Out-of-range entries are marked clearly. That helps when a complaint arrives late, or an insurer asks.

Where it fits

How this feature fits the system.

Water Park Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Tickets and wristbands

Counters sell entry, child rates and bundles from one price list, and a wristband balance is spent later at stalls and kiosks.

Point of Sale Billing

Lifeguard roster and rotation

Guards clock in at their tower or slide top, and rotation breaks are logged so the head guard sees who is due to move.

Attendance & Time Tracking

Pump, filter and slide maintenance

Backwash cycles, pump service dates and slide surface checks are scheduled by attraction, with outside inspector dates held beside each.

Asset AMC Tracking
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements