Skip to main content
GullySystem

Harvest crew attendance and pay for flower farms

This feature marks who cut, graded or packed on which day. Pay is then worked out as a stem rate or a day rate, and any advance is netted off on the slip. Crew leaders mark attendance, grading leads confirm the counts, and the owner receives the pay figures.

What the crew attendance record keeps

Each person on a harvest crew has one line for every day worked, in the greenhouse or the hall. The line says what the person did and what the day was worth. Each slip is read from these lines. Four kinds of entry sit on them.

Daily marks by task

A person’s day is marked against cutting, grading or packing, and the mark is entered by the crew leader. A cutter who also grades in the afternoon carries both marks. Marks show who worked, and at what task.

Hours and stem counts

The day’s hours and the stems credited to a cutter sit beside the mark on the attendance line. Stem counts come from the harvest record, entered by crew and bay. Pay uses only these two figures.

Stem rate or day rate

Each person is set on a stem rate or a day rate. A cutter on a stem rate is paid on counted stems. A packer on a day rate is paid for the days marked. Rates are set once.

Advances and the pay slip

An advance given during the period is entered with its date. The slip nets it off against what has been earned. Earnings, advance and balance all show. The person can follow each line of the slip.

A pay period on the harvest floor

Marks are made as the crews arrive, and counts are read as the cut closes. Settling pay is not a separate task left to the end. Four moments from one pay period follow. They show the record being built and then read.

A crew leader marks the morning

The leader marks who has arrived and what each person will do that day: cutting Bay 3, grading or packing. Marks are entered before the first cut. Late arrivals are added as they come in.

A cutter’s stems are credited

As the cut closes, the stem count for the crew is read from the harvest record and credited to each cutter on a stem rate. A short count is queried with the grading lead first. Then the credit stands.

An advance is given

Midway through the period a packer asks for an advance. The owner agrees, and the amount is entered with the date. It will be netted off on the slip. The packer’s day marks stay as they are.

Slips are read at period end

At the end of the period the owner reads each slip: days marked, stems credited, rate, advances and balance due. A disagreement goes to the marks. Slip and attendance lines stay in view, with the crew leader in the room.

Who marks, confirms and reads pay

Pay touches people directly, so access is kept tight. Four roles take part, and each sees what the job needs. Only the slip brings all the figures together. Here is each role in turn.

For crew leaders

A crew leader marks attendance and tasks for the people on that crew and enters stems by bay and grade on a phone. The leader sees the crew’s own marks.

Grading and packing leads

A grading lead confirms the counts credited to each cutter against what reached the table, and marks the graders and packers. Corrections carry a name and a date. Rates are not the lead’s to set.

For head growers

A head grower reads stems cut per bay, variety and crew against plan, which shows how each crew performed. Slips stay out of the grower’s view. That separation keeps pay questions away from growing decisions.

For farm owners

The owner sets rates, agrees advances and reads the slips at the end of each period. Pay figures can go to the accountant through the accounting export. No one else changes a rate. That rule is worth keeping.

Decisions to settle before pay is run

Pay disputes start with unclear rules, so a few decisions come before the first slip. Settle them with the owner, the head grower and the crew leaders, and write them on one sheet. Four decisions come first.

Who may amend marks or rates

Decide who may amend an attendance mark, a credited count or a rate. Crew leaders mark, leads confirm, and only the owner changes a rate. Keep it simple.

What the pay record leaves out

Office staff, drivers and nursery workers on monthly pay can stay outside this record, since their pay follows other terms. Decide where statutory deductions and bank payments are worked out. Your accountant holds them already. Leave them there.

How the crew list comes across

The crew list, with names and rates, is entered at set-up from the sheet you pay by now. Each lead checks it against who actually turns up. Missing names are added before the first slip.

Which report matters first for Harvest crew attendance and pay

Stems cut per bay, variety and crew against plan is the first report to read on this feature. Pay is only as sound as the counts behind it. Trust that report, and the slips follow.

How pay draws on the rest of the farm

Pay takes its counts from harvest and its names from the crew list. It hands totals on to the office. Five links tie it to the rest of the product and to the accountant. Each one runs through a mark or a count on a particular day.

  • Harvest and grading supplies stems credited by crew
  • Bay numbers on marks come from the bay register
  • Packing marks match boxes made on the same day
  • Reports compare each crew’s stems with its plan
  • Pay totals pass to the accountant through the accounting export

What crew pay does not do

The feature works out earnings and nets off advances. It does not calculate statutory deductions, pay anyone or file anything with an authority. Employment terms and tax treatment belong to the owner and the accountant. It does not judge a dispute either. A crew of five cutters on a flat day rate can be run from a muster book.

FAQ

Frequently asked questions

How is a cutter’s stem rate worked out?

The stems credited to the cutter from the harvest record are multiplied by the rate set for that person at set-up. The figure appears on the slip beside the days marked. Rates change only through the owner.

Where do the stem counts for pay come from?

They come from harvest and grading, entered by crew and bay. A grading lead confirms each count before it is credited. Pay does not use a second tally kept by hand on the floor. One count serves both.

How are advances shown on the slip?

Each advance is entered with its date and taken off the amount earned. It lists earnings, the advance and the balance. Anyone can see how the balance was reached, line by line. Disputes are rare when the lines are open.

Who marks attendance when crews work in the greenhouse?

The crew leader marks it on a phone. Entries wait on the device until a network is in range. The grading lead then confirms the counts once the cut closes for the day, and credits them to each cutter.

Does it run full payroll with deductions?

No, it does not. It works out stem-rate or day pay and nets off advances. Statutory deductions, bank payments and filings stay with the owner and the accountant, who receive totals from the accounting export.

Where it fits

How this feature fits the system.

Flower Farms and Nursery Management Software: the parts that work with this feature, the trades that use it and the ways to put it in place.

Propagation and nursery lots

Each tray of cuttings takes a lot number tied to its mother plant, and the number follows it through hardening, potting and sale.

Batch and Serial Tracking

Cold room and stock

Boxes are received into the chiller by pallet, released against orders, and the oldest stock of each grade is flagged to ship first.

Stock Tracking and Alerts

Orders, standing buyers and dispatch

A florist’s standing order is filled box by box from the cold room, and any shortfall by grade is shown to the sales desk.

Order Management
Talk to us

Tell us what you need.

Tell us what your team does today, where work gets stuck and what you want to change.

What happens after you share your requirements

  1. We review your brief and the systems you already use.
  2. We clarify the workflow, missing information and the work to consider first.
  3. The proposed scope sets out the deliverables, responsibilities and dependencies.
  4. Review the scope and commercial terms before deciding whether to proceed.

Start with your requirements

Describe your current process, the people involved and the change you need. Start with the details you know; we can clarify the rest together.

Share your requirements